kopia lustrzana https://github.com/Aircoookie/WLED
76 wiersze
2.4 KiB
Markdown
76 wiersze
2.4 KiB
Markdown
|
# PIR sensor switch
|
||
|
|
|
||
|
|
This usermod-v2 modification allows the connection of a PIR sensor to switch on the LED strip when motion is detected. The switch-off occurs ten minutes after no more motion is detected.
|
||
|
|
|
||
|
|
_Story:_
|
||
|
|
|
||
|
|
I use the PIR Sensor to automatically turn on the WLED analog clock in my home office room when I am there.
|
||
|
|
The LED strip is switched [using a relay](https://github.com/Aircoookie/WLED/wiki/Control-a-relay-with-WLED) to keep the power consumption low when it is switched off.
|
||
|
|
|
||
|
|
## Webinterface
|
||
|
|
|
||
|
|
The info page in the web interface shows the items below
|
||
|
|
|
||
|
|
- the state of the sensor. By clicking on the state the sensor can be deactivated/activated.
|
||
|
|
**I recommend to deactivate the sensor before installing an OTA update**.
|
||
|
|
- the remaining time of the off timer.
|
||
|
|
|
||
|
|
## JSON API
|
||
|
|
|
||
|
|
The usermod supports the following state changes:
|
||
|
|
|
||
|
|
| JSON key | Value range | Description |
|
||
|
|
|------------|-------------|---------------------------------|
|
||
|
|
| PIRenabled | bool | Deactivdate/activate the sensor |
|
||
|
|
| PIRoffSec | 60 to 43200 | Off timer seconds |
|
||
|
|
|
||
|
|
## Sensor connection
|
||
|
|
|
||
|
|
My setup uses an HC-SR501 sensor, a HC-SR505 should also work.
|
||
|
|
|
||
|
|
The usermod uses GPIO13 (D1 mini pin D7) for the sensor signal.
|
||
|
|
[This example page](http://www.esp8266learning.com/wemos-mini-pir-sensor-example.php) describes how to connect the sensor.
|
||
|
|
|
||
|
|
Use the potentiometers on the sensor to set the time-delay to the minimum and the sensitivity to about half, or slightly above.
|
||
|
|
|
||
|
|
## Usermod installation
|
||
|
|
|
||
|
|
1. Copy the file `usermod_PIR_sensor_switch.h` to the `wled00` directory.
|
||
|
|
2. Register the usermod by adding `#include "usermod_PIR_sensor_switch.h"` in the top and `registerUsermod(new PIRsensorSwitch());` in the bottom of `usermods_list.cpp`.
|
||
|
|
|
||
|
|
Example **usermods_list.cpp**:
|
||
|
|
|
||
|
|
```cpp
|
||
|
|
#include "wled.h"
|
||
|
|
/*
|
||
|
|
* Register your v2 usermods here!
|
||
|
|
* (for v1 usermods using just usermod.cpp, you can ignore this file)
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Add/uncomment your usermod filename here (and once more below)
|
||
|
|
* || || ||
|
||
|
|
* \/ \/ \/
|
||
|
|
*/
|
||
|
|
//#include "usermod_v2_example.h"
|
||
|
|
//#include "usermod_temperature.h"
|
||
|
|
//#include "usermod_v2_empty.h"
|
||
|
|
#include "usermod_PIR_sensor_switch.h"
|
||
|
|
|
||
|
|
void registerUsermods()
|
||
|
|
{
|
||
|
|
/*
|
||
|
|
* Add your usermod class name here
|
||
|
|
* || || ||
|
||
|
|
* \/ \/ \/
|
||
|
|
*/
|
||
|
|
//usermods.add(new MyExampleUsermod());
|
||
|
|
//usermods.add(new UsermodTemperature());
|
||
|
|
//usermods.add(new UsermodRenameMe());
|
||
|
|
usermods.add(new PIRsensorSwitch());
|
||
|
|
|
||
|
|
}
|
||
|
|
```
|
||
|
|
|
||
|
|
Have fun - @gegu
|