mirror
/
TextileDrawingMachine
kopia lustrzana https://github.com/eumorpurgo/TextileDrawingMachine
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
TextileDrawingMachine/Firmware
Historia
Florent NOEL b0a03d1297 Add configuration files for Marlin 2.0.x 2020-02-26 14:21:31 +01:00
..
marlin_1.1.1
…
marlin_1.1.9 Add configuration files for marlin 1.1.9 2019-04-03 17:32:32 +02:00
marlin_2.0.x Add configuration files for Marlin 2.0.x 2020-02-26 14:21:31 +01:00
README.md Add configuration files for marlin 1.1.9 2019-04-03 17:32:32 +02:00

README.md

Firmware

The firmware used for driving the RepRap board is Marlin.

Marlin 1.1.1

Configuration.h changes

  • Endstop Settings
original value value
//#define ENDSTOPPULLUP_XMAX #define ENDSTOPPULLUP_XMAX
//#define ENDSTOPPULLUP_YMAX #define ENDSTOPPULLUP_YMAX
//#define ENDSTOPPULLUP_ZMAX #define ENDSTOPPULLUP_ZMAX
//#define ENDSTOPPULLUP_XMIN #define ENDSTOPPULLUP_XMIN
//#define ENDSTOPPULLUP_YMIN #define ENDSTOPPULLUP_YMIN
//#define ENDSTOPPULLUP_ZMIN #define ENDSTOPPULLUP_ZMIN
//#define ENDSTOPPULLUP_ZMIN_PROBE #define ENDSTOPPULLUP_ZMIN_PROBE
#define Y_MIN_ENDSTOP_INVERTING false #define Y_MIN_ENDSTOP_INVERTING true
#define X_MAX_ENDSTOP_INVERTING false #define X_MAX_ENDSTOP_INVERTING true
#define Y_MAX_ENDSTOP_INVERTING false #define Y_MAX_ENDSTOP_INVERTING true
#define Z_MIN_PROBE_ENDSTOP_INVERTING false #define Z_MIN_PROBE_ENDSTOP_INVERTING true
  • Movement Settings
original value value
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 3.3333, 13.9, 8, 500 }
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 300, 25 }
  • Axis settings
original value value
#define INVERT_Z_DIR false #define INVERT_Z_DIR true
#define X_MAX_POS 1400 #define X_MAX_POS 1280
#define Y_MAX_POS 2000 #define Y_MAX_POS 3000
#define Z_MAX_POS 200 #define Z_MAX_POS 4
  • Homing settings
original value value
#define HOMING_FEEDRATE_XY (50*60) #define HOMING_FEEDRATE_XY (100*60)

Configuration_adv.h changes

original value value
#define X_HOME_BUMP_MM 5 #define X_HOME_BUMP_MM 10

how to install

  • download the firmware 1.1.1 on the marlin github repository firmware
  • copy over the modified Configuration.h and Configuration_avd.h files
  • flash the firmware using the Arduino IDE

Marlin 1.1.9

Configuration.h changes

  • Endstop Settings
original value value
//#define ENDSTOPPULLUP_XMAX #define ENDSTOPPULLUP_XMAX
//#define ENDSTOPPULLUP_YMAX #define ENDSTOPPULLUP_YMAX
//#define ENDSTOPPULLUP_ZMAX #define ENDSTOPPULLUP_ZMAX
//#define ENDSTOPPULLUP_XMIN #define ENDSTOPPULLUP_XMIN
//#define ENDSTOPPULLUP_YMIN #define ENDSTOPPULLUP_YMIN
//#define ENDSTOPPULLUP_ZMIN #define ENDSTOPPULLUP_ZMIN
//#define ENDSTOPPULLUP_ZMIN_PROBE #define ENDSTOPPULLUP_ZMIN_PROBE
#define Y_MIN_ENDSTOP_INVERTING false #define Y_MIN_ENDSTOP_INVERTING true
#define X_MAX_ENDSTOP_INVERTING false #define X_MAX_ENDSTOP_INVERTING true
#define Y_MAX_ENDSTOP_INVERTING false #define Y_MAX_ENDSTOP_INVERTING true
#define Z_MIN_PROBE_ENDSTOP_INVERTING false #define Z_MIN_PROBE_ENDSTOP_INVERTING true
  • Movement Settings
original value value
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 3.3333, 13.9, 8, 500 }
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 300, 25 }
  • Axis settings
original value value
#define INVERT_Z_DIR false #define INVERT_Z_DIR true
#define X_BED_SIZE 1400 #define X_BED_SIZE 1280
#define Y_BED_SIZE 2000 #define Y_BED_SIZE 3000
#define Z_MAX_POS 200 #define Z_MAX_POS 4
  • Homing settings
original value value
#define HOMING_FEEDRATE_XY (50*60) #define HOMING_FEEDRATE_XY (100*60)

Configuration_adv.h changes

original value value
#define X_HOME_BUMP_MM 5 #define X_HOME_BUMP_MM 10

how to install

  • download the firmware 1.1.9 on the marlin github repository firmware
  • copy over the modified Configuration.h and Configuration_avd.h files
  • flash the firmware using the Arduino IDE