// STM32F100 and SI4032 RTTY transmitter
// released under GPL v.2 by anonymous developer
// enjoy and have a nice day
// ver 1.5a
#include <stm32f10x_gpio.h>
#include <stm32f10x_tim.h>
#include <stm32f10x_spi.h>
#include <stm32f10x_tim.h>
#include <stm32f10x_usart.h>
#include <stm32f10x_adc.h>
#include <stm32f10x_rcc.h>
#include "stdlib.h"
#include <stdio.h>
#include <string.h>
#include <misc.h>
#include "f_rtty.h"
#include "fun.h"
#include "init.h"
#include "config.h"
#include "radio.h"
#include "ublox.h"
#include "delay.h"
#include "aprs.h"
///////////////////////////// test mode /////////////
const unsigned char test = 0; // 0 - normal, 1 - short frame only cunter, height, flag
char callsign[15] = {CALLSIGN};


#define GREEN  GPIO_Pin_7
#define RED  GPIO_Pin_8

unsigned int send_cun;        //frame counter
char status[2] = {'N'};
int napiecie;

volatile char flaga = ((((tx_delay / 1000) & 0x0f) << 3) | Smoc);
uint16_t CRC_rtty = 0x12ab;  //checksum
char buf_rtty[200];
char menu[] = "$$$$$$STM32 RTTY tracker by Blasiu, enjoy and see you on the HUB... \n\r";
char init_trx[] = "\n\rPowering up TX\n\r";
volatile unsigned char pun = 0;
volatile unsigned int cun = 10;
unsigned char dev = 0;
volatile unsigned char tx_on = 0;
volatile unsigned int tx_on_delay;
volatile unsigned char tx_enable = 0;
rttyStates send_rtty_status = rttyZero;
volatile char *rtty_buf;
unsigned char cun_off = 0;


/**
 * GPS data processing
 */
void USART1_IRQHandler(void) {
  if (USART_GetITStatus(USART1, USART_IT_RXNE) != RESET) {
    ublox_handle_incoming_byte((uint8_t) USART_ReceiveData(USART1));
  }else if (USART_GetITStatus(USART1, USART_IT_ORE) != RESET) {
    USART_ReceiveData(USART1);
  } else {
    USART_ReceiveData(USART1);
  }
}

void TIM2_IRQHandler(void) {
  if (TIM_GetITStatus(TIM2, TIM_IT_Update) != RESET) {
    TIM_ClearITPendingBit(TIM2, TIM_IT_Update);

    if (aprs_is_active()){
      aprs_timer_handler();
    } else {
      if (tx_on /*&& ++cun_rtty == 17*/) {
        send_rtty_status = send_rtty((char *) rtty_buf);
        if (send_rtty_status == rttyEnd) {
          GPIO_SetBits(GPIOB, RED);
          if (*(++rtty_buf) == 0) {
            tx_on = 0;
            tx_on_delay = tx_delay / (1000/RTTY_SPEED);//2500;
            tx_enable = 0;
            radio_disable_tx();
          }
        } else if (send_rtty_status == rttyOne) {
          radio_rw_register(0x73, 0x02, 1);
          GPIO_SetBits(GPIOB, RED);
        } else if (send_rtty_status == rttyZero) {
          radio_rw_register(0x73, 0x00, 1);
          GPIO_ResetBits(GPIOB, RED);
        }
      }
      if (!tx_on && --tx_on_delay == 0) {
        tx_enable = 1;
        tx_on_delay--;
      }
      if (--cun == 0) {
        if (pun) {
          GPIO_ResetBits(GPIOB, GREEN);
          pun = 0;
        } else {
          if (flaga & 0x80) {
            GPIO_SetBits(GPIOB, GREEN);
          }
          pun = 1;
        }
        cun = 200;
      }
    }

  }

}

int main(void) {
#ifdef DEBUG
  debug();
#endif
  RCC_Conf();
  NVIC_Conf();
  init_port();

  init_timer(RTTY_SPEED);
  delay_init();
  ublox_init();

  int8_t temperatura;

  GPIO_SetBits(GPIOB, RED);
  USART_SendData(USART3, 0xc);
  radio_rw_register(0x02, 0xff, 0);

  radio_rw_register(0x03, 0xff, 0);
  radio_rw_register(0x04, 0xff, 0);
  radio_soft_reset();
  // programowanie czestotliwosci nadawania
  radio_set_tx_frequency(RTTY_FREQUENCY);

  // Programowanie mocy nadajnika
  radio_rw_register(0x6D, 00 | (Smoc & 0x0007), 1);

  radio_rw_register(0x71, 0x00, 1);
  radio_rw_register(0x87, 0x08, 0);
  radio_rw_register(0x02, 0xff, 0);
  radio_rw_register(0x75, 0xff, 0);
  radio_rw_register(0x76, 0xff, 0);
  radio_rw_register(0x77, 0xff, 0);
  radio_rw_register(0x12, 0x20, 1);
  radio_rw_register(0x13, 0x00, 1);
  radio_rw_register(0x12, 0x00, 1);
  radio_rw_register(0x0f, 0x80, 1);
  rtty_buf = buf_rtty;
  tx_on = 0;
  tx_enable = 1;
  //tx_enable =0;
  //Button = ADCVal[1];
  aprs_init();
  radio_enable_tx();

  uint16_t x = 710;
  while (1){
    radio_enable_tx();
    USART_Cmd(USART1, DISABLE);
    x+=1;
    //aprs_change_tone_time(x);
    aprs_test(x);
    USART_Cmd(USART1, ENABLE);

    radio_disable_tx();
    _delay_ms(1000);
  }

#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Wmissing-noreturn"
  while (1) {
    if (tx_on == 0 && tx_enable) {
      start_bits = RTTY_PRE_START_BITS;
      temperatura = radio_read_temperature();

      napiecie = srednia(ADCVal[0] * 600 / 4096);
      GPSEntry gpsData;
      ublox_get_last_data(&gpsData);
      if (gpsData.fix >= 3) {
        flaga |= 0x80;
      } else {
        flaga &= ~0x80;
      }
      uint8_t lat_d = (uint8_t) abs(gpsData.lat_raw / 10000000);
      uint32_t lat_fl = (uint32_t) abs(abs(gpsData.lat_raw) - lat_d * 10000000) / 100;
      uint8_t lon_d = (uint8_t) abs(gpsData.lon_raw / 10000000);
      uint32_t lon_fl = (uint32_t) abs(abs(gpsData.lon_raw) - lon_d * 10000000) / 100;

      sprintf(buf_rtty, "$$$$%s,%d,%02u%02u%02u,%s%d.%05ld,%s%d.%05ld,%ld,%d,%d,%d,%d,%d,%02x", callsign, send_cun,
              gpsData.hours, gpsData.minutes, gpsData.seconds,
              gpsData.lat_raw < 0 ? "-" : "", lat_d, lat_fl,
              gpsData.lon_raw < 0 ? "-" : "", lon_d, lon_fl,
              (gpsData.alt_raw / 1000), temperatura, napiecie, gpsData.sats_raw,
              gpsData.ok_packets, gpsData.bad_packets,
              flaga);
      CRC_rtty = 0xffff;                                              //napiecie      flaga
      CRC_rtty = gps_CRC16_checksum(buf_rtty + 4);
      sprintf(buf_rtty, "%s*%04X\n", buf_rtty, CRC_rtty & 0xffff);
      rtty_buf = buf_rtty;
      radio_enable_tx();
      tx_on = 1;

      send_cun++;
    } else {
      NVIC_SystemLPConfig(NVIC_LP_SEVONPEND, DISABLE);
      __WFI();
    }
  }
#pragma clang diagnostic pop
}

#ifdef  DEBUG
void assert_failed(uint8_t* file, uint32_t line)
{
    while (1);
}
#endif