mirror
/
STM32_RTTY
kopia lustrzana https://github.com/Qyon/STM32_RTTY
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Add files via upload

master_upsteram
yanosik 2016-12-10 20:28:08 +00:00 zatwierdzone przez GitHub
rodzic e5f89f4d85
commit 952fdbf0e3
10 zmienionych plików z 11213 dodań i 0 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

225
stm_lib/src/misc.c 100644
Wyświetl plik

@ -0,0 +1,225 @@
/**
******************************************************************************
* @file misc.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the miscellaneous firmware functions (add-on
* to CMSIS functions).
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "misc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup MISC
* @brief MISC driver modules
* @{
*/
/** @defgroup MISC_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup MISC_Private_Defines
* @{
*/
#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000)
/**
* @}
*/
/** @defgroup MISC_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup MISC_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup MISC_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup MISC_Private_Functions
* @{
*/
/**
* @brief Configures the priority grouping: pre-emption priority and subpriority.
* @param NVIC_PriorityGroup: specifies the priority grouping bits length.
* This parameter can be one of the following values:
* @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
* 4 bits for subpriority
* @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
* 3 bits for subpriority
* @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
* 2 bits for subpriority
* @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
* 1 bits for subpriority
* @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
* 0 bits for subpriority
* @retval None
*/
void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
{
/* Check the parameters */
assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
/* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
}
/**
* @brief Initializes the NVIC peripheral according to the specified
* parameters in the NVIC_InitStruct.
* @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
* the configuration information for the specified NVIC peripheral.
* @retval None
*/
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
{
uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));
assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
{
/* Compute the Corresponding IRQ Priority --------------------------------*/
tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
tmppre = (0x4 - tmppriority);
tmpsub = tmpsub >> tmppriority;
tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub;
tmppriority = tmppriority << 0x04;
NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
/* Enable the Selected IRQ Channels --------------------------------------*/
NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
(uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
}
else
{
/* Disable the Selected IRQ Channels -------------------------------------*/
NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
(uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
}
}
/**
* @brief Sets the vector table location and Offset.
* @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
* This parameter can be one of the following values:
* @arg NVIC_VectTab_RAM
* @arg NVIC_VectTab_FLASH
* @param Offset: Vector Table base offset field. This value must be a multiple
* of 0x200.
* @retval None
*/
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
{
/* Check the parameters */
assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
assert_param(IS_NVIC_OFFSET(Offset));
SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
}
/**
* @brief Selects the condition for the system to enter low power mode.
* @param LowPowerMode: Specifies the new mode for the system to enter low power mode.
* This parameter can be one of the following values:
* @arg NVIC_LP_SEVONPEND
* @arg NVIC_LP_SLEEPDEEP
* @arg NVIC_LP_SLEEPONEXIT
* @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_NVIC_LP(LowPowerMode));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
SCB->SCR |= LowPowerMode;
}
else
{
SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
}
}
/**
* @brief Configures the SysTick clock source.
* @param SysTick_CLKSource: specifies the SysTick clock source.
* This parameter can be one of the following values:
* @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
* @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
* @retval None
*/
void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
{
/* Check the parameters */
assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
{
SysTick->CTRL |= SysTick_CLKSource_HCLK;
}
else
{
SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

1307
stm_lib/src/stm32f10x_adc.c 100644
Wyświetl plik

Plik diff jest za duży Load Diff

714
stm_lib/src/stm32f10x_dma.c 100644
Wyświetl plik

@ -0,0 +1,714 @@
/**
******************************************************************************
* @file stm32f10x_dma.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the DMA firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_dma.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup DMA
* @brief DMA driver modules
* @{
*/
/** @defgroup DMA_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup DMA_Private_Defines
* @{
*/
/* DMA1 Channelx interrupt pending bit masks */
#define DMA1_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1))
#define DMA1_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2))
#define DMA1_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3))
#define DMA1_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4))
#define DMA1_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5))
#define DMA1_Channel6_IT_Mask ((uint32_t)(DMA_ISR_GIF6 | DMA_ISR_TCIF6 | DMA_ISR_HTIF6 | DMA_ISR_TEIF6))
#define DMA1_Channel7_IT_Mask ((uint32_t)(DMA_ISR_GIF7 | DMA_ISR_TCIF7 | DMA_ISR_HTIF7 | DMA_ISR_TEIF7))
/* DMA2 Channelx interrupt pending bit masks */
#define DMA2_Channel1_IT_Mask ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1))
#define DMA2_Channel2_IT_Mask ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2))
#define DMA2_Channel3_IT_Mask ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3))
#define DMA2_Channel4_IT_Mask ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4))
#define DMA2_Channel5_IT_Mask ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5))
/* DMA2 FLAG mask */
#define FLAG_Mask ((uint32_t)0x10000000)
/* DMA registers Masks */
#define CCR_CLEAR_Mask ((uint32_t)0xFFFF800F)
/**
* @}
*/
/** @defgroup DMA_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup DMA_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup DMA_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup DMA_Private_Functions
* @{
*/
/**
* @brief Deinitializes the DMAy Channelx registers to their default reset
* values.
* @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
* @retval None
*/
void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx)
{
/* Check the parameters */
assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
/* Disable the selected DMAy Channelx */
DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN);
/* Reset DMAy Channelx control register */
DMAy_Channelx->CCR = 0;
/* Reset DMAy Channelx remaining bytes register */
DMAy_Channelx->CNDTR = 0;
/* Reset DMAy Channelx peripheral address register */
DMAy_Channelx->CPAR = 0;
/* Reset DMAy Channelx memory address register */
DMAy_Channelx->CMAR = 0;
if (DMAy_Channelx == DMA1_Channel1)
{
/* Reset interrupt pending bits for DMA1 Channel1 */
DMA1->IFCR |= DMA1_Channel1_IT_Mask;
}
else if (DMAy_Channelx == DMA1_Channel2)
{
/* Reset interrupt pending bits for DMA1 Channel2 */
DMA1->IFCR |= DMA1_Channel2_IT_Mask;
}
else if (DMAy_Channelx == DMA1_Channel3)
{
/* Reset interrupt pending bits for DMA1 Channel3 */
DMA1->IFCR |= DMA1_Channel3_IT_Mask;
}
else if (DMAy_Channelx == DMA1_Channel4)
{
/* Reset interrupt pending bits for DMA1 Channel4 */
DMA1->IFCR |= DMA1_Channel4_IT_Mask;
}
else if (DMAy_Channelx == DMA1_Channel5)
{
/* Reset interrupt pending bits for DMA1 Channel5 */
DMA1->IFCR |= DMA1_Channel5_IT_Mask;
}
else if (DMAy_Channelx == DMA1_Channel6)
{
/* Reset interrupt pending bits for DMA1 Channel6 */
DMA1->IFCR |= DMA1_Channel6_IT_Mask;
}
else if (DMAy_Channelx == DMA1_Channel7)
{
/* Reset interrupt pending bits for DMA1 Channel7 */
DMA1->IFCR |= DMA1_Channel7_IT_Mask;
}
else if (DMAy_Channelx == DMA2_Channel1)
{
/* Reset interrupt pending bits for DMA2 Channel1 */
DMA2->IFCR |= DMA2_Channel1_IT_Mask;
}
else if (DMAy_Channelx == DMA2_Channel2)
{
/* Reset interrupt pending bits for DMA2 Channel2 */
DMA2->IFCR |= DMA2_Channel2_IT_Mask;
}
else if (DMAy_Channelx == DMA2_Channel3)
{
/* Reset interrupt pending bits for DMA2 Channel3 */
DMA2->IFCR |= DMA2_Channel3_IT_Mask;
}
else if (DMAy_Channelx == DMA2_Channel4)
{
/* Reset interrupt pending bits for DMA2 Channel4 */
DMA2->IFCR |= DMA2_Channel4_IT_Mask;
}
else
{
if (DMAy_Channelx == DMA2_Channel5)
{
/* Reset interrupt pending bits for DMA2 Channel5 */
DMA2->IFCR |= DMA2_Channel5_IT_Mask;
}
}
}
/**
* @brief Initializes the DMAy Channelx according to the specified
* parameters in the DMA_InitStruct.
* @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
* @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that
* contains the configuration information for the specified DMA Channel.
* @retval None
*/
void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct)
{
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR));
assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize));
assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc));
assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc));
assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize));
assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize));
assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode));
assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority));
assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M));
/*--------------------------- DMAy Channelx CCR Configuration -----------------*/
/* Get the DMAy_Channelx CCR value */
tmpreg = DMAy_Channelx->CCR;
/* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */
tmpreg &= CCR_CLEAR_Mask;
/* Configure DMAy Channelx: data transfer, data size, priority level and mode */
/* Set DIR bit according to DMA_DIR value */
/* Set CIRC bit according to DMA_Mode value */
/* Set PINC bit according to DMA_PeripheralInc value */
/* Set MINC bit according to DMA_MemoryInc value */
/* Set PSIZE bits according to DMA_PeripheralDataSize value */
/* Set MSIZE bits according to DMA_MemoryDataSize value */
/* Set PL bits according to DMA_Priority value */
/* Set the MEM2MEM bit according to DMA_M2M value */
tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode |
DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc |
DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize |
DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M;
/* Write to DMAy Channelx CCR */
DMAy_Channelx->CCR = tmpreg;
/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/
/* Write to DMAy Channelx CNDTR */
DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize;
/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/
/* Write to DMAy Channelx CPAR */
DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr;
/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/
/* Write to DMAy Channelx CMAR */
DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr;
}
/**
* @brief Fills each DMA_InitStruct member with its default value.
* @param DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will
* be initialized.
* @retval None
*/
void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct)
{
/*-------------- Reset DMA init structure parameters values ------------------*/
/* Initialize the DMA_PeripheralBaseAddr member */
DMA_InitStruct->DMA_PeripheralBaseAddr = 0;
/* Initialize the DMA_MemoryBaseAddr member */
DMA_InitStruct->DMA_MemoryBaseAddr = 0;
/* Initialize the DMA_DIR member */
DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC;
/* Initialize the DMA_BufferSize member */
DMA_InitStruct->DMA_BufferSize = 0;
/* Initialize the DMA_PeripheralInc member */
DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable;
/* Initialize the DMA_MemoryInc member */
DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable;
/* Initialize the DMA_PeripheralDataSize member */
DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
/* Initialize the DMA_MemoryDataSize member */
DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
/* Initialize the DMA_Mode member */
DMA_InitStruct->DMA_Mode = DMA_Mode_Normal;
/* Initialize the DMA_Priority member */
DMA_InitStruct->DMA_Priority = DMA_Priority_Low;
/* Initialize the DMA_M2M member */
DMA_InitStruct->DMA_M2M = DMA_M2M_Disable;
}
/**
* @brief Enables or disables the specified DMAy Channelx.
* @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
* @param NewState: new state of the DMAy Channelx.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected DMAy Channelx */
DMAy_Channelx->CCR |= DMA_CCR1_EN;
}
else
{
/* Disable the selected DMAy Channelx */
DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN);
}
}
/**
* @brief Enables or disables the specified DMAy Channelx interrupts.
* @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
* @param DMA_IT: specifies the DMA interrupts sources to be enabled
* or disabled.
* This parameter can be any combination of the following values:
* @arg DMA_IT_TC: Transfer complete interrupt mask
* @arg DMA_IT_HT: Half transfer interrupt mask
* @arg DMA_IT_TE: Transfer error interrupt mask
* @param NewState: new state of the specified DMA interrupts.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
assert_param(IS_DMA_CONFIG_IT(DMA_IT));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected DMA interrupts */
DMAy_Channelx->CCR |= DMA_IT;
}
else
{
/* Disable the selected DMA interrupts */
DMAy_Channelx->CCR &= ~DMA_IT;
}
}
/**
* @brief Sets the number of data units in the current DMAy Channelx transfer.
* @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
* @param DataNumber: The number of data units in the current DMAy Channelx
* transfer.
* @note This function can only be used when the DMAy_Channelx is disabled.
* @retval None.
*/
void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber)
{
/* Check the parameters */
assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/
/* Write to DMAy Channelx CNDTR */
DMAy_Channelx->CNDTR = DataNumber;
}
/**
* @brief Returns the number of remaining data units in the current
* DMAy Channelx transfer.
* @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and
* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
* @retval The number of remaining data units in the current DMAy Channelx
* transfer.
*/
uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx)
{
/* Check the parameters */
assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
/* Return the number of remaining data units for DMAy Channelx */
return ((uint16_t)(DMAy_Channelx->CNDTR));
}
/**
* @brief Checks whether the specified DMAy Channelx flag is set or not.
* @param DMAy_FLAG: specifies the flag to check.
* This parameter can be one of the following values:
* @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
* @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
* @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag.
* @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag.
* @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag.
* @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag.
* @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag.
* @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag.
* @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag.
* @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag.
* @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag.
* @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag.
* @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag.
* @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag.
* @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag.
* @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag.
* @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag.
* @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag.
* @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag.
* @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag.
* @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag.
* @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag.
* @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag.
* @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag.
* @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag.
* @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag.
* @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag.
* @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag.
* @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag.
* @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag.
* @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag.
* @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag.
* @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag.
* @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag.
* @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag.
* @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag.
* @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag.
* @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag.
* @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag.
* @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag.
* @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag.
* @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag.
* @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag.
* @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag.
* @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag.
* @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
* @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
* @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
* @retval The new state of DMAy_FLAG (SET or RESET).
*/
FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG)
{
FlagStatus bitstatus = RESET;
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_DMA_GET_FLAG(DMAy_FLAG));
/* Calculate the used DMAy */
if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
{
/* Get DMA2 ISR register value */
tmpreg = DMA2->ISR ;
}
else
{
/* Get DMA1 ISR register value */
tmpreg = DMA1->ISR ;
}
/* Check the status of the specified DMAy flag */
if ((tmpreg & DMAy_FLAG) != (uint32_t)RESET)
{
/* DMAy_FLAG is set */
bitstatus = SET;
}
else
{
/* DMAy_FLAG is reset */
bitstatus = RESET;
}
/* Return the DMAy_FLAG status */
return bitstatus;
}
/**
* @brief Clears the DMAy Channelx's pending flags.
* @param DMAy_FLAG: specifies the flag to clear.
* This parameter can be any combination (for the same DMA) of the following values:
* @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
* @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
* @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag.
* @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag.
* @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag.
* @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag.
* @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag.
* @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag.
* @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag.
* @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag.
* @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag.
* @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag.
* @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag.
* @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag.
* @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag.
* @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag.
* @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag.
* @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag.
* @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag.
* @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag.
* @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag.
* @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag.
* @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag.
* @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag.
* @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag.
* @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag.
* @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag.
* @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag.
* @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag.
* @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag.
* @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag.
* @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag.
* @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag.
* @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag.
* @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag.
* @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag.
* @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag.
* @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag.
* @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag.
* @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag.
* @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag.
* @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag.
* @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag.
* @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag.
* @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag.
* @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
* @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
* @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
* @retval None
*/
void DMA_ClearFlag(uint32_t DMAy_FLAG)
{
/* Check the parameters */
assert_param(IS_DMA_CLEAR_FLAG(DMAy_FLAG));
/* Calculate the used DMAy */
if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
{
/* Clear the selected DMAy flags */
DMA2->IFCR = DMAy_FLAG;
}
else
{
/* Clear the selected DMAy flags */
DMA1->IFCR = DMAy_FLAG;
}
}
/**
* @brief Checks whether the specified DMAy Channelx interrupt has occurred or not.
* @param DMAy_IT: specifies the DMAy interrupt source to check.
* This parameter can be one of the following values:
* @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
* @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
* @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt.
* @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt.
* @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt.
* @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt.
* @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt.
* @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt.
* @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt.
* @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt.
* @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt.
* @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt.
* @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt.
* @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt.
* @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt.
* @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt.
* @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt.
* @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt.
* @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt.
* @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt.
* @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt.
* @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt.
* @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt.
* @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt.
* @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt.
* @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt.
* @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt.
* @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt.
* @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt.
* @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt.
* @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt.
* @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt.
* @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt.
* @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt.
* @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt.
* @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt.
* @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt.
* @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt.
* @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt.
* @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt.
* @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt.
* @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt.
* @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt.
* @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt.
* @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt.
* @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
* @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
* @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
* @retval The new state of DMAy_IT (SET or RESET).
*/
ITStatus DMA_GetITStatus(uint32_t DMAy_IT)
{
ITStatus bitstatus = RESET;
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_DMA_GET_IT(DMAy_IT));
/* Calculate the used DMA */
if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
{
/* Get DMA2 ISR register value */
tmpreg = DMA2->ISR;
}
else
{
/* Get DMA1 ISR register value */
tmpreg = DMA1->ISR;
}
/* Check the status of the specified DMAy interrupt */
if ((tmpreg & DMAy_IT) != (uint32_t)RESET)
{
/* DMAy_IT is set */
bitstatus = SET;
}
else
{
/* DMAy_IT is reset */
bitstatus = RESET;
}
/* Return the DMA_IT status */
return bitstatus;
}
/**
* @brief Clears the DMAy Channelx's interrupt pending bits.
* @param DMAy_IT: specifies the DMAy interrupt pending bit to clear.
* This parameter can be any combination (for the same DMA) of the following values:
* @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
* @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
* @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt.
* @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt.
* @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt.
* @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt.
* @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt.
* @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt.
* @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt.
* @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt.
* @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt.
* @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt.
* @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt.
* @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt.
* @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt.
* @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt.
* @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt.
* @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt.
* @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt.
* @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt.
* @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt.
* @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt.
* @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt.
* @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt.
* @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt.
* @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt.
* @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt.
* @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt.
* @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt.
* @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt.
* @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt.
* @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt.
* @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt.
* @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt.
* @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt.
* @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt.
* @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt.
* @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt.
* @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt.
* @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt.
* @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt.
* @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt.
* @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt.
* @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt.
* @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt.
* @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
* @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
* @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
* @retval None
*/
void DMA_ClearITPendingBit(uint32_t DMAy_IT)
{
/* Check the parameters */
assert_param(IS_DMA_CLEAR_IT(DMAy_IT));
/* Calculate the used DMAy */
if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
{
/* Clear the selected DMAy interrupt pending bits */
DMA2->IFCR = DMAy_IT;
}
else
{
/* Clear the selected DMAy interrupt pending bits */
DMA1->IFCR = DMAy_IT;
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

1684
stm_lib/src/stm32f10x_flash.c 100644
Wyświetl plik

Plik diff jest za duży Load Diff

650
stm_lib/src/stm32f10x_gpio.c 100644
Wyświetl plik

@ -0,0 +1,650 @@
/**
******************************************************************************
* @file stm32f10x_gpio.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the GPIO firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_gpio.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup GPIO
* @brief GPIO driver modules
* @{
*/
/** @defgroup GPIO_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup GPIO_Private_Defines
* @{
*/
/* ------------ RCC registers bit address in the alias region ----------------*/
#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE)
/* --- EVENTCR Register -----*/
/* Alias word address of EVOE bit */
#define EVCR_OFFSET (AFIO_OFFSET + 0x00)
#define EVOE_BitNumber ((uint8_t)0x07)
#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4))
/* --- MAPR Register ---*/
/* Alias word address of MII_RMII_SEL bit */
#define MAPR_OFFSET (AFIO_OFFSET + 0x04)
#define MII_RMII_SEL_BitNumber ((u8)0x17)
#define MAPR_MII_RMII_SEL_BB (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4))
#define EVCR_PORTPINCONFIG_MASK ((uint16_t)0xFF80)
#define LSB_MASK ((uint16_t)0xFFFF)
#define DBGAFR_POSITION_MASK ((uint32_t)0x000F0000)
#define DBGAFR_SWJCFG_MASK ((uint32_t)0xF0FFFFFF)
#define DBGAFR_LOCATION_MASK ((uint32_t)0x00200000)
#define DBGAFR_NUMBITS_MASK ((uint32_t)0x00100000)
/**
* @}
*/
/** @defgroup GPIO_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup GPIO_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup GPIO_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup GPIO_Private_Functions
* @{
*/
/**
* @brief Deinitializes the GPIOx peripheral registers to their default reset values.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @retval None
*/
void GPIO_DeInit(GPIO_TypeDef* GPIOx)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
if (GPIOx == GPIOA)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE);
}
else if (GPIOx == GPIOB)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE);
}
else if (GPIOx == GPIOC)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE);
}
else if (GPIOx == GPIOD)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE);
}
else if (GPIOx == GPIOE)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE);
}
else if (GPIOx == GPIOF)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE);
}
else
{
if (GPIOx == GPIOG)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE);
}
}
}
/**
* @brief Deinitializes the Alternate Functions (remap, event control
* and EXTI configuration) registers to their default reset values.
* @param None
* @retval None
*/
void GPIO_AFIODeInit(void)
{
RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE);
RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE);
}
/**
* @brief Initializes the GPIOx peripheral according to the specified
* parameters in the GPIO_InitStruct.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that
* contains the configuration information for the specified GPIO peripheral.
* @retval None
*/
void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
{
uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00;
uint32_t tmpreg = 0x00, pinmask = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode));
assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin));
/*---------------------------- GPIO Mode Configuration -----------------------*/
currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F);
if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00)
{
/* Check the parameters */
assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed));
/* Output mode */
currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed;
}
/*---------------------------- GPIO CRL Configuration ------------------------*/
/* Configure the eight low port pins */
if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00)
{
tmpreg = GPIOx->CRL;
for (pinpos = 0x00; pinpos < 0x08; pinpos++)
{
pos = ((uint32_t)0x01) << pinpos;
/* Get the port pins position */
currentpin = (GPIO_InitStruct->GPIO_Pin) & pos;
if (currentpin == pos)
{
pos = pinpos << 2;
/* Clear the corresponding low control register bits */
pinmask = ((uint32_t)0x0F) << pos;
tmpreg &= ~pinmask;
/* Write the mode configuration in the corresponding bits */
tmpreg |= (currentmode << pos);
/* Reset the corresponding ODR bit */
if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
{
GPIOx->BRR = (((uint32_t)0x01) << pinpos);
}
else
{
/* Set the corresponding ODR bit */
if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
{
GPIOx->BSRR = (((uint32_t)0x01) << pinpos);
}
}
}
}
GPIOx->CRL = tmpreg;
}
/*---------------------------- GPIO CRH Configuration ------------------------*/
/* Configure the eight high port pins */
if (GPIO_InitStruct->GPIO_Pin > 0x00FF)
{
tmpreg = GPIOx->CRH;
for (pinpos = 0x00; pinpos < 0x08; pinpos++)
{
pos = (((uint32_t)0x01) << (pinpos + 0x08));
/* Get the port pins position */
currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos);
if (currentpin == pos)
{
pos = pinpos << 2;
/* Clear the corresponding high control register bits */
pinmask = ((uint32_t)0x0F) << pos;
tmpreg &= ~pinmask;
/* Write the mode configuration in the corresponding bits */
tmpreg |= (currentmode << pos);
/* Reset the corresponding ODR bit */
if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
{
GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08));
}
/* Set the corresponding ODR bit */
if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
{
GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08));
}
}
}
GPIOx->CRH = tmpreg;
}
}
/**
* @brief Fills each GPIO_InitStruct member with its default value.
* @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will
* be initialized.
* @retval None
*/
void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
{
/* Reset GPIO init structure parameters values */
GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All;
GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz;
GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING;
}
/**
* @brief Reads the specified input port pin.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bit to read.
* This parameter can be GPIO_Pin_x where x can be (0..15).
* @retval The input port pin value.
*/
uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
uint8_t bitstatus = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET)
{
bitstatus = (uint8_t)Bit_SET;
}
else
{
bitstatus = (uint8_t)Bit_RESET;
}
return bitstatus;
}
/**
* @brief Reads the specified GPIO input data port.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @retval GPIO input data port value.
*/
uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
return ((uint16_t)GPIOx->IDR);
}
/**
* @brief Reads the specified output data port bit.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bit to read.
* This parameter can be GPIO_Pin_x where x can be (0..15).
* @retval The output port pin value.
*/
uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
uint8_t bitstatus = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET)
{
bitstatus = (uint8_t)Bit_SET;
}
else
{
bitstatus = (uint8_t)Bit_RESET;
}
return bitstatus;
}
/**
* @brief Reads the specified GPIO output data port.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @retval GPIO output data port value.
*/
uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
return ((uint16_t)GPIOx->ODR);
}
/**
* @brief Sets the selected data port bits.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bits to be written.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval None
*/
void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
GPIOx->BSRR = GPIO_Pin;
}
/**
* @brief Clears the selected data port bits.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bits to be written.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval None
*/
void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
GPIOx->BRR = GPIO_Pin;
}
/**
* @brief Sets or clears the selected data port bit.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bit to be written.
* This parameter can be one of GPIO_Pin_x where x can be (0..15).
* @param BitVal: specifies the value to be written to the selected bit.
* This parameter can be one of the BitAction enum values:
* @arg Bit_RESET: to clear the port pin
* @arg Bit_SET: to set the port pin
* @retval None
*/
void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
assert_param(IS_GPIO_BIT_ACTION(BitVal));
if (BitVal != Bit_RESET)
{
GPIOx->BSRR = GPIO_Pin;
}
else
{
GPIOx->BRR = GPIO_Pin;
}
}
/**
* @brief Writes data to the specified GPIO data port.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param PortVal: specifies the value to be written to the port output data register.
* @retval None
*/
void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
GPIOx->ODR = PortVal;
}
/**
* @brief Locks GPIO Pins configuration registers.
* @param GPIOx: where x can be (A..G) to select the GPIO peripheral.
* @param GPIO_Pin: specifies the port bit to be written.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval None
*/
void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
uint32_t tmp = 0x00010000;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
tmp |= GPIO_Pin;
/* Set LCKK bit */
GPIOx->LCKR = tmp;
/* Reset LCKK bit */
GPIOx->LCKR = GPIO_Pin;
/* Set LCKK bit */
GPIOx->LCKR = tmp;
/* Read LCKK bit*/
tmp = GPIOx->LCKR;
/* Read LCKK bit*/
tmp = GPIOx->LCKR;
}
/**
* @brief Selects the GPIO pin used as Event output.
* @param GPIO_PortSource: selects the GPIO port to be used as source
* for Event output.
* This parameter can be GPIO_PortSourceGPIOx where x can be (A..E).
* @param GPIO_PinSource: specifies the pin for the Event output.
* This parameter can be GPIO_PinSourcex where x can be (0..15).
* @retval None
*/
void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
{
uint32_t tmpreg = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource));
assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
tmpreg = AFIO->EVCR;
/* Clear the PORT[6:4] and PIN[3:0] bits */
tmpreg &= EVCR_PORTPINCONFIG_MASK;
tmpreg |= (uint32_t)GPIO_PortSource << 0x04;
tmpreg |= GPIO_PinSource;
AFIO->EVCR = tmpreg;
}
/**
* @brief Enables or disables the Event Output.
* @param NewState: new state of the Event output.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void GPIO_EventOutputCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
*(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState;
}
/**
* @brief Changes the mapping of the specified pin.
* @param GPIO_Remap: selects the pin to remap.
* This parameter can be one of the following values:
* @arg GPIO_Remap_SPI1 : SPI1 Alternate Function mapping
* @arg GPIO_Remap_I2C1 : I2C1 Alternate Function mapping
* @arg GPIO_Remap_USART1 : USART1 Alternate Function mapping
* @arg GPIO_Remap_USART2 : USART2 Alternate Function mapping
* @arg GPIO_PartialRemap_USART3 : USART3 Partial Alternate Function mapping
* @arg GPIO_FullRemap_USART3 : USART3 Full Alternate Function mapping
* @arg GPIO_PartialRemap_TIM1 : TIM1 Partial Alternate Function mapping
* @arg GPIO_FullRemap_TIM1 : TIM1 Full Alternate Function mapping
* @arg GPIO_PartialRemap1_TIM2 : TIM2 Partial1 Alternate Function mapping
* @arg GPIO_PartialRemap2_TIM2 : TIM2 Partial2 Alternate Function mapping
* @arg GPIO_FullRemap_TIM2 : TIM2 Full Alternate Function mapping
* @arg GPIO_PartialRemap_TIM3 : TIM3 Partial Alternate Function mapping
* @arg GPIO_FullRemap_TIM3 : TIM3 Full Alternate Function mapping
* @arg GPIO_Remap_TIM4 : TIM4 Alternate Function mapping
* @arg GPIO_Remap1_CAN1 : CAN1 Alternate Function mapping
* @arg GPIO_Remap2_CAN1 : CAN1 Alternate Function mapping
* @arg GPIO_Remap_PD01 : PD01 Alternate Function mapping
* @arg GPIO_Remap_TIM5CH4_LSI : LSI connected to TIM5 Channel4 input capture for calibration
* @arg GPIO_Remap_ADC1_ETRGINJ : ADC1 External Trigger Injected Conversion remapping
* @arg GPIO_Remap_ADC1_ETRGREG : ADC1 External Trigger Regular Conversion remapping
* @arg GPIO_Remap_ADC2_ETRGINJ : ADC2 External Trigger Injected Conversion remapping
* @arg GPIO_Remap_ADC2_ETRGREG : ADC2 External Trigger Regular Conversion remapping
* @arg GPIO_Remap_ETH : Ethernet remapping (only for Connectivity line devices)
* @arg GPIO_Remap_CAN2 : CAN2 remapping (only for Connectivity line devices)
* @arg GPIO_Remap_SWJ_NoJTRST : Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST
* @arg GPIO_Remap_SWJ_JTAGDisable : JTAG-DP Disabled and SW-DP Enabled
* @arg GPIO_Remap_SWJ_Disable : Full SWJ Disabled (JTAG-DP + SW-DP)
* @arg GPIO_Remap_SPI3 : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices)
* When the SPI3/I2S3 is remapped using this function, the SWJ is configured
* to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST.
* @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected
* to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices)
* If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to
* Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output.
* @arg GPIO_Remap_PTP_PPS : Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices)
* @arg GPIO_Remap_TIM15 : TIM15 Alternate Function mapping (only for Value line devices)
* @arg GPIO_Remap_TIM16 : TIM16 Alternate Function mapping (only for Value line devices)
* @arg GPIO_Remap_TIM17 : TIM17 Alternate Function mapping (only for Value line devices)
* @arg GPIO_Remap_CEC : CEC Alternate Function mapping (only for Value line devices)
* @arg GPIO_Remap_TIM1_DMA : TIM1 DMA requests mapping (only for Value line devices)
* @arg GPIO_Remap_TIM9 : TIM9 Alternate Function mapping (only for XL-density devices)
* @arg GPIO_Remap_TIM10 : TIM10 Alternate Function mapping (only for XL-density devices)
* @arg GPIO_Remap_TIM11 : TIM11 Alternate Function mapping (only for XL-density devices)
* @arg GPIO_Remap_TIM13 : TIM13 Alternate Function mapping (only for High density Value line and XL-density devices)
* @arg GPIO_Remap_TIM14 : TIM14 Alternate Function mapping (only for High density Value line and XL-density devices)
* @arg GPIO_Remap_FSMC_NADV : FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices)
* @arg GPIO_Remap_TIM67_DAC_DMA : TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices)
* @arg GPIO_Remap_TIM12 : TIM12 Alternate Function mapping (only for High density Value line devices)
* @arg GPIO_Remap_MISC : Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping,
* only for High density Value line devices)
* @param NewState: new state of the port pin remapping.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState)
{
uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_REMAP(GPIO_Remap));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if((GPIO_Remap & 0x80000000) == 0x80000000)
{
tmpreg = AFIO->MAPR2;
}
else
{
tmpreg = AFIO->MAPR;
}
tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10;
tmp = GPIO_Remap & LSB_MASK;
if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK))
{
tmpreg &= DBGAFR_SWJCFG_MASK;
AFIO->MAPR &= DBGAFR_SWJCFG_MASK;
}
else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK)
{
tmp1 = ((uint32_t)0x03) << tmpmask;
tmpreg &= ~tmp1;
tmpreg |= ~DBGAFR_SWJCFG_MASK;
}
else
{
tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10));
tmpreg |= ~DBGAFR_SWJCFG_MASK;
}
if (NewState != DISABLE)
{
tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10));
}
if((GPIO_Remap & 0x80000000) == 0x80000000)
{
AFIO->MAPR2 = tmpreg;
}
else
{
AFIO->MAPR = tmpreg;
}
}
/**
* @brief Selects the GPIO pin used as EXTI Line.
* @param GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines.
* This parameter can be GPIO_PortSourceGPIOx where x can be (A..G).
* @param GPIO_PinSource: specifies the EXTI line to be configured.
* This parameter can be GPIO_PinSourcex where x can be (0..15).
* @retval None
*/
void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
{
uint32_t tmp = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource));
assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03));
AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp;
AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)));
}
/**
* @brief Selects the Ethernet media interface.
* @note This function applies only to STM32 Connectivity line devices.
* @param GPIO_ETH_MediaInterface: specifies the Media Interface mode.
* This parameter can be one of the following values:
* @arg GPIO_ETH_MediaInterface_MII: MII mode
* @arg GPIO_ETH_MediaInterface_RMII: RMII mode
* @retval None
*/
void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface)
{
assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface));
/* Configure MII_RMII selection bit */
*(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

307
stm_lib/src/stm32f10x_pwr.c 100644
Wyświetl plik

@ -0,0 +1,307 @@
/**
******************************************************************************
* @file stm32f10x_pwr.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the PWR firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_pwr.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup PWR
* @brief PWR driver modules
* @{
*/
/** @defgroup PWR_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup PWR_Private_Defines
* @{
*/
/* --------- PWR registers bit address in the alias region ---------- */
#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
/* --- CR Register ---*/
/* Alias word address of DBP bit */
#define CR_OFFSET (PWR_OFFSET + 0x00)
#define DBP_BitNumber 0x08
#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))
/* Alias word address of PVDE bit */
#define PVDE_BitNumber 0x04
#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))
/* --- CSR Register ---*/
/* Alias word address of EWUP bit */
#define CSR_OFFSET (PWR_OFFSET + 0x04)
#define EWUP_BitNumber 0x08
#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))
/* ------------------ PWR registers bit mask ------------------------ */
/* CR register bit mask */
#define CR_DS_MASK ((uint32_t)0xFFFFFFFC)
#define CR_PLS_MASK ((uint32_t)0xFFFFFF1F)
/**
* @}
*/
/** @defgroup PWR_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup PWR_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup PWR_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup PWR_Private_Functions
* @{
*/
/**
* @brief Deinitializes the PWR peripheral registers to their default reset values.
* @param None
* @retval None
*/
void PWR_DeInit(void)
{
RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE);
RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE);
}
/**
* @brief Enables or disables access to the RTC and backup registers.
* @param NewState: new state of the access to the RTC and backup registers.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void PWR_BackupAccessCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
*(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState;
}
/**
* @brief Enables or disables the Power Voltage Detector(PVD).
* @param NewState: new state of the PVD.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void PWR_PVDCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
*(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState;
}
/**
* @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
* @param PWR_PVDLevel: specifies the PVD detection level
* This parameter can be one of the following values:
* @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V
* @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V
* @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V
* @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V
* @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V
* @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V
* @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V
* @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V
* @retval None
*/
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel)
{
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel));
tmpreg = PWR->CR;
/* Clear PLS[7:5] bits */
tmpreg &= CR_PLS_MASK;
/* Set PLS[7:5] bits according to PWR_PVDLevel value */
tmpreg |= PWR_PVDLevel;
/* Store the new value */
PWR->CR = tmpreg;
}
/**
* @brief Enables or disables the WakeUp Pin functionality.
* @param NewState: new state of the WakeUp Pin functionality.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void PWR_WakeUpPinCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
*(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState;
}
/**
* @brief Enters STOP mode.
* @param PWR_Regulator: specifies the regulator state in STOP mode.
* This parameter can be one of the following values:
* @arg PWR_Regulator_ON: STOP mode with regulator ON
* @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode
* @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
* This parameter can be one of the following values:
* @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction
* @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction
* @retval None
*/
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry)
{
uint32_t tmpreg = 0;
/* Check the parameters */
assert_param(IS_PWR_REGULATOR(PWR_Regulator));
assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry));
/* Select the regulator state in STOP mode ---------------------------------*/
tmpreg = PWR->CR;
/* Clear PDDS and LPDS bits */
tmpreg &= CR_DS_MASK;
/* Set LPDS bit according to PWR_Regulator value */
tmpreg |= PWR_Regulator;
/* Store the new value */
PWR->CR = tmpreg;
/* Set SLEEPDEEP bit of Cortex System Control Register */
SCB->SCR |= SCB_SCR_SLEEPDEEP;
/* Select STOP mode entry --------------------------------------------------*/
if(PWR_STOPEntry == PWR_STOPEntry_WFI)
{
/* Request Wait For Interrupt */
__WFI();
}
else
{
/* Request Wait For Event */
__WFE();
}
/* Reset SLEEPDEEP bit of Cortex System Control Register */
SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP);
}
/**
* @brief Enters STANDBY mode.
* @param None
* @retval None
*/
void PWR_EnterSTANDBYMode(void)
{
/* Clear Wake-up flag */
PWR->CR |= PWR_CR_CWUF;
/* Select STANDBY mode */
PWR->CR |= PWR_CR_PDDS;
/* Set SLEEPDEEP bit of Cortex System Control Register */
SCB->SCR |= SCB_SCR_SLEEPDEEP;
/* This option is used to ensure that store operations are completed */
#if defined ( __CC_ARM )
__force_stores();
#endif
/* Request Wait For Interrupt */
__WFI();
}
/**
* @brief Checks whether the specified PWR flag is set or not.
* @param PWR_FLAG: specifies the flag to check.
* This parameter can be one of the following values:
* @arg PWR_FLAG_WU: Wake Up flag
* @arg PWR_FLAG_SB: StandBy flag
* @arg PWR_FLAG_PVDO: PVD Output
* @retval The new state of PWR_FLAG (SET or RESET).
*/
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_PWR_GET_FLAG(PWR_FLAG));
if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
/* Return the flag status */
return bitstatus;
}
/**
* @brief Clears the PWR's pending flags.
* @param PWR_FLAG: specifies the flag to clear.
* This parameter can be one of the following values:
* @arg PWR_FLAG_WU: Wake Up flag
* @arg PWR_FLAG_SB: StandBy flag
* @retval None
*/
void PWR_ClearFlag(uint32_t PWR_FLAG)
{
/* Check the parameters */
assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG));
PWR->CR |= PWR_FLAG << 2;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

1470
stm_lib/src/stm32f10x_rcc.c 100644
Wyświetl plik

Plik diff jest za duży Load Diff

908
stm_lib/src/stm32f10x_spi.c 100644
Wyświetl plik

@ -0,0 +1,908 @@
/**
******************************************************************************
* @file stm32f10x_spi.c
* @author MCD Application Team
* @version V3.5.0
* @date 11-March-2011
* @brief This file provides all the SPI firmware functions.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_spi.h"
#include "stm32f10x_rcc.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @defgroup SPI
* @brief SPI driver modules
* @{
*/
/** @defgroup SPI_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup SPI_Private_Defines
* @{
*/
/* SPI SPE mask */
#define CR1_SPE_Set ((uint16_t)0x0040)
#define CR1_SPE_Reset ((uint16_t)0xFFBF)
/* I2S I2SE mask */
#define I2SCFGR_I2SE_Set ((uint16_t)0x0400)
#define I2SCFGR_I2SE_Reset ((uint16_t)0xFBFF)
/* SPI CRCNext mask */
#define CR1_CRCNext_Set ((uint16_t)0x1000)
/* SPI CRCEN mask */
#define CR1_CRCEN_Set ((uint16_t)0x2000)
#define CR1_CRCEN_Reset ((uint16_t)0xDFFF)
/* SPI SSOE mask */
#define CR2_SSOE_Set ((uint16_t)0x0004)
#define CR2_SSOE_Reset ((uint16_t)0xFFFB)
/* SPI registers Masks */
#define CR1_CLEAR_Mask ((uint16_t)0x3040)
#define I2SCFGR_CLEAR_Mask ((uint16_t)0xF040)
/* SPI or I2S mode selection masks */
#define SPI_Mode_Select ((uint16_t)0xF7FF)
#define I2S_Mode_Select ((uint16_t)0x0800)
/* I2S clock source selection masks */
#define I2S2_CLOCK_SRC ((uint32_t)(0x00020000))
#define I2S3_CLOCK_SRC ((uint32_t)(0x00040000))
#define I2S_MUL_MASK ((uint32_t)(0x0000F000))
#define I2S_DIV_MASK ((uint32_t)(0x000000F0))
/**
* @}
*/
/** @defgroup SPI_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup SPI_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup SPI_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup SPI_Private_Functions
* @{
*/
/**
* @brief Deinitializes the SPIx peripheral registers to their default
* reset values (Affects also the I2Ss).
* @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
* @retval None
*/
void SPI_I2S_DeInit(SPI_TypeDef* SPIx)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
if (SPIx == SPI1)
{
/* Enable SPI1 reset state */
RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE);
/* Release SPI1 from reset state */
RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE);
}
else if (SPIx == SPI2)
{
/* Enable SPI2 reset state */
RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE);
/* Release SPI2 from reset state */
RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE);
}
else
{
if (SPIx == SPI3)
{
/* Enable SPI3 reset state */
RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE);
/* Release SPI3 from reset state */
RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE);
}
}
}
/**
* @brief Initializes the SPIx peripheral according to the specified
* parameters in the SPI_InitStruct.
* @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
* @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that
* contains the configuration information for the specified SPI peripheral.
* @retval None
*/
void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct)
{
uint16_t tmpreg = 0;
/* check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
/* Check the SPI parameters */
assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction));
assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode));
assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize));
assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL));
assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA));
assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS));
assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler));
assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit));
assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial));
/*---------------------------- SPIx CR1 Configuration ------------------------*/
/* Get the SPIx CR1 value */
tmpreg = SPIx->CR1;
/* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */
tmpreg &= CR1_CLEAR_Mask;
/* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler
master/salve mode, CPOL and CPHA */
/* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */
/* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */
/* Set LSBFirst bit according to SPI_FirstBit value */
/* Set BR bits according to SPI_BaudRatePrescaler value */
/* Set CPOL bit according to SPI_CPOL value */
/* Set CPHA bit according to SPI_CPHA value */
tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode |
SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL |
SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS |
SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit);
/* Write to SPIx CR1 */
SPIx->CR1 = tmpreg;
/* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */
SPIx->I2SCFGR &= SPI_Mode_Select;
/*---------------------------- SPIx CRCPOLY Configuration --------------------*/
/* Write to SPIx CRCPOLY */
SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial;
}
/**
* @brief Initializes the SPIx peripheral according to the specified
* parameters in the I2S_InitStruct.
* @param SPIx: where x can be 2 or 3 to select the SPI peripheral
* (configured in I2S mode).
* @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that
* contains the configuration information for the specified SPI peripheral
* configured in I2S mode.
* @note
* The function calculates the optimal prescaler needed to obtain the most
* accurate audio frequency (depending on the I2S clock source, the PLL values
* and the product configuration). But in case the prescaler value is greater
* than 511, the default value (0x02) will be configured instead. *
* @retval None
*/
void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct)
{
uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1;
uint32_t tmp = 0;
RCC_ClocksTypeDef RCC_Clocks;
uint32_t sourceclock = 0;
/* Check the I2S parameters */
assert_param(IS_SPI_23_PERIPH(SPIx));
assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode));
assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard));
assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat));
assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput));
assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq));
assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL));
/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/
/* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask;
SPIx->I2SPR = 0x0002;
/* Get the I2SCFGR register value */
tmpreg = SPIx->I2SCFGR;
/* If the default value has to be written, reinitialize i2sdiv and i2sodd*/
if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default)
{
i2sodd = (uint16_t)0;
i2sdiv = (uint16_t)2;
}
/* If the requested audio frequency is not the default, compute the prescaler */
else
{
/* Check the frame length (For the Prescaler computing) */
if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b)
{
/* Packet length is 16 bits */
packetlength = 1;
}
else
{
/* Packet length is 32 bits */
packetlength = 2;
}
/* Get the I2S clock source mask depending on the peripheral number */
if(((uint32_t)SPIx) == SPI2_BASE)
{
/* The mask is relative to I2S2 */
tmp = I2S2_CLOCK_SRC;
}
else
{
/* The mask is relative to I2S3 */
tmp = I2S3_CLOCK_SRC;
}
/* Check the I2S clock source configuration depending on the Device:
Only Connectivity line devices have the PLL3 VCO clock */
#ifdef STM32F10X_CL
if((RCC->CFGR2 & tmp) != 0)
{
/* Get the configuration bits of RCC PLL3 multiplier */
tmp = (uint32_t)((RCC->CFGR2 & I2S_MUL_MASK) >> 12);
/* Get the value of the PLL3 multiplier */
if((tmp > 5) && (tmp < 15))
{
/* Multiplier is between 8 and 14 (value 15 is forbidden) */
tmp += 2;
}
else
{
if (tmp == 15)
{
/* Multiplier is 20 */
tmp = 20;
}
}
/* Get the PREDIV2 value */
sourceclock = (uint32_t)(((RCC->CFGR2 & I2S_DIV_MASK) >> 4) + 1);
/* Calculate the Source Clock frequency based on PLL3 and PREDIV2 values */
sourceclock = (uint32_t) ((HSE_Value / sourceclock) * tmp * 2);
}
else
{
/* I2S Clock source is System clock: Get System Clock frequency */
RCC_GetClocksFreq(&RCC_Clocks);
/* Get the source clock value: based on System Clock value */
sourceclock = RCC_Clocks.SYSCLK_Frequency;
}
#else /* STM32F10X_HD */
/* I2S Clock source is System clock: Get System Clock frequency */
RCC_GetClocksFreq(&RCC_Clocks);
/* Get the source clock value: based on System Clock value */
sourceclock = RCC_Clocks.SYSCLK_Frequency;
#endif /* STM32F10X_CL */
/* Compute the Real divider depending on the MCLK output state with a floating point */
if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable)
{
/* MCLK output is enabled */
tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5);
}
else
{
/* MCLK output is disabled */
tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5);
}
/* Remove the floating point */
tmp = tmp / 10;
/* Check the parity of the divider */
i2sodd = (uint16_t)(tmp & (uint16_t)0x0001);
/* Compute the i2sdiv prescaler */
i2sdiv = (uint16_t)((tmp - i2sodd) / 2);
/* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
i2sodd = (uint16_t) (i2sodd << 8);
}
/* Test if the divider is 1 or 0 or greater than 0xFF */
if ((i2sdiv < 2) || (i2sdiv > 0xFF))
{
/* Set the default values */
i2sdiv = 2;
i2sodd = 0;
}
/* Write to SPIx I2SPR register the computed value */
SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput));
/* Configure the I2S with the SPI_InitStruct values */
tmpreg |= (uint16_t)(I2S_Mode_Select | (uint16_t)(I2S_InitStruct->I2S_Mode | \
(uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \
(uint16_t)I2S_InitStruct->I2S_CPOL))));
/* Write to SPIx I2SCFGR */
SPIx->I2SCFGR = tmpreg;
}
/**
* @brief Fills each SPI_InitStruct member with its default value.
* @param SPI_InitStruct : pointer to a SPI_InitTypeDef structure which will be initialized.
* @retval None
*/
void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct)
{
/*--------------- Reset SPI init structure parameters values -----------------*/
/* Initialize the SPI_Direction member */
SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex;
/* initialize the SPI_Mode member */
SPI_InitStruct->SPI_Mode = SPI_Mode_Slave;
/* initialize the SPI_DataSize member */
SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b;
/* Initialize the SPI_CPOL member */
SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low;
/* Initialize the SPI_CPHA member */
SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge;
/* Initialize the SPI_NSS member */
SPI_InitStruct->SPI_NSS = SPI_NSS_Hard;
/* Initialize the SPI_BaudRatePrescaler member */
SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2;
/* Initialize the SPI_FirstBit member */
SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB;
/* Initialize the SPI_CRCPolynomial member */
SPI_InitStruct->SPI_CRCPolynomial = 7;
}
/**
* @brief Fills each I2S_InitStruct member with its default value.
* @param I2S_InitStruct : pointer to a I2S_InitTypeDef structure which will be initialized.
* @retval None
*/
void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct)
{
/*--------------- Reset I2S init structure parameters values -----------------*/
/* Initialize the I2S_Mode member */
I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx;
/* Initialize the I2S_Standard member */
I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips;
/* Initialize the I2S_DataFormat member */
I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b;
/* Initialize the I2S_MCLKOutput member */
I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable;
/* Initialize the I2S_AudioFreq member */
I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default;
/* Initialize the I2S_CPOL member */
I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low;
}
/**
* @brief Enables or disables the specified SPI peripheral.
* @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
* @param NewState: new state of the SPIx peripheral.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected SPI peripheral */
SPIx->CR1 |= CR1_SPE_Set;
}
else
{
/* Disable the selected SPI peripheral */
SPIx->CR1 &= CR1_SPE_Reset;
}
}
/**
* @brief Enables or disables the specified SPI peripheral (in I2S mode).
* @param SPIx: where x can be 2 or 3 to select the SPI peripheral.
* @param NewState: new state of the SPIx peripheral.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_SPI_23_PERIPH(SPIx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected SPI peripheral (in I2S mode) */
SPIx->I2SCFGR |= I2SCFGR_I2SE_Set;
}
else
{
/* Disable the selected SPI peripheral (in I2S mode) */
SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset;
}
}
/**
* @brief Enables or disables the specified SPI/I2S interrupts.
* @param SPIx: where x can be
* - 1, 2 or 3 in SPI mode
* - 2 or 3 in I2S mode
* @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to be enabled or disabled.
* This parameter can be one of the following values:
* @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask
* @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask
* @arg SPI_I2S_IT_ERR: Error interrupt mask
* @param NewState: new state of the specified SPI/I2S interrupt.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState)
{
uint16_t itpos = 0, itmask = 0 ;
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT));
/* Get the SPI/I2S IT index */
itpos = SPI_I2S_IT >> 4;
/* Set the IT mask */
itmask = (uint16_t)1 << (uint16_t)itpos;
if (NewState != DISABLE)
{
/* Enable the selected SPI/I2S interrupt */
SPIx->CR2 |= itmask;
}
else
{
/* Disable the selected SPI/I2S interrupt */
SPIx->CR2 &= (uint16_t)~itmask;
}
}
/**
* @brief Enables or disables the SPIx/I2Sx DMA interface.
* @param SPIx: where x can be
* - 1, 2 or 3 in SPI mode
* - 2 or 3 in I2S mode
* @param SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request to be enabled or disabled.
* This parameter can be any combination of the following values:
* @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request
* @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request
* @param NewState: new state of the selected SPI/I2S DMA transfer request.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq));
if (NewState != DISABLE)
{
/* Enable the selected SPI/I2S DMA requests */
SPIx->CR2 |= SPI_I2S_DMAReq;
}
else
{
/* Disable the selected SPI/I2S DMA requests */
SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq;
}
}
/**
* @brief Transmits a Data through the SPIx/I2Sx peripheral.
* @param SPIx: where x can be
* - 1, 2 or 3 in SPI mode
* - 2 or 3 in I2S mode
* @param Data : Data to be transmitted.
* @retval None
*/
void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
/* Write in the DR register the data to be sent */
SPIx->DR = Data;
}
/**
* @brief Returns the most recent received data by the SPIx/I2Sx peripheral.
* @param SPIx: where x can be
* - 1, 2 or 3 in SPI mode
* - 2 or 3 in I2S mode
* @retval The value of the received data.
*/
uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
/* Return the data in the DR register */
return SPIx->DR;
}
/**
* @brief Configures internally by software the NSS pin for the selected SPI.
* @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
* @param SPI_NSSInternalSoft: specifies the SPI NSS internal state.
* This parameter can be one of the following values:
* @arg SPI_NSSInternalSoft_Set: Set NSS pin internally
* @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally
* @retval None
*/
void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft));
if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset)
{
/* Set NSS pin internally by software */
SPIx->CR1 |= SPI_NSSInternalSoft_Set;
}
else
{
/* Reset NSS pin internally by software */
SPIx->CR1 &= SPI_NSSInternalSoft_Reset;
}
}
/**
* @brief Enables or disables the SS output for the selected SPI.
* @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
* @param NewState: new state of the SPIx SS output.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected SPI SS output */
SPIx->CR2 |= CR2_SSOE_Set;
}
else
{
/* Disable the selected SPI SS output */
SPIx->CR2 &= CR2_SSOE_Reset;
}
}
/**
* @brief Configures the data size for the selected SPI.
* @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
* @param SPI_DataSize: specifies the SPI data size.
* This parameter can be one of the following values:
* @arg SPI_DataSize_16b: Set data frame format to 16bit
* @arg SPI_DataSize_8b: Set data frame format to 8bit
* @retval None
*/
void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_SPI_DATASIZE(SPI_DataSize));
/* Clear DFF bit */
SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b;
/* Set new DFF bit value */
SPIx->CR1 |= SPI_DataSize;
}
/**
* @brief Transmit the SPIx CRC value.
* @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
* @retval None
*/
void SPI_TransmitCRC(SPI_TypeDef* SPIx)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
/* Enable the selected SPI CRC transmission */
SPIx->CR1 |= CR1_CRCNext_Set;
}
/**
* @brief Enables or disables the CRC value calculation of the transferred bytes.
* @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
* @param NewState: new state of the SPIx CRC value calculation.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected SPI CRC calculation */
SPIx->CR1 |= CR1_CRCEN_Set;
}
else
{
/* Disable the selected SPI CRC calculation */
SPIx->CR1 &= CR1_CRCEN_Reset;
}
}
/**
* @brief Returns the transmit or the receive CRC register value for the specified SPI.
* @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
* @param SPI_CRC: specifies the CRC register to be read.
* This parameter can be one of the following values:
* @arg SPI_CRC_Tx: Selects Tx CRC register
* @arg SPI_CRC_Rx: Selects Rx CRC register
* @retval The selected CRC register value..
*/
uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC)
{
uint16_t crcreg = 0;
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_SPI_CRC(SPI_CRC));
if (SPI_CRC != SPI_CRC_Rx)
{
/* Get the Tx CRC register */
crcreg = SPIx->TXCRCR;
}
else
{
/* Get the Rx CRC register */
crcreg = SPIx->RXCRCR;
}
/* Return the selected CRC register */
return crcreg;
}
/**
* @brief Returns the CRC Polynomial register value for the specified SPI.
* @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
* @retval The CRC Polynomial register value.
*/
uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
/* Return the CRC polynomial register */
return SPIx->CRCPR;
}
/**
* @brief Selects the data transfer direction in bi-directional mode for the specified SPI.
* @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
* @param SPI_Direction: specifies the data transfer direction in bi-directional mode.
* This parameter can be one of the following values:
* @arg SPI_Direction_Tx: Selects Tx transmission direction
* @arg SPI_Direction_Rx: Selects Rx receive direction
* @retval None
*/
void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_SPI_DIRECTION(SPI_Direction));
if (SPI_Direction == SPI_Direction_Tx)
{
/* Set the Tx only mode */
SPIx->CR1 |= SPI_Direction_Tx;
}
else
{
/* Set the Rx only mode */
SPIx->CR1 &= SPI_Direction_Rx;
}
}
/**
* @brief Checks whether the specified SPI/I2S flag is set or not.
* @param SPIx: where x can be
* - 1, 2 or 3 in SPI mode
* - 2 or 3 in I2S mode
* @param SPI_I2S_FLAG: specifies the SPI/I2S flag to check.
* This parameter can be one of the following values:
* @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag.
* @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag.
* @arg SPI_I2S_FLAG_BSY: Busy flag.
* @arg SPI_I2S_FLAG_OVR: Overrun flag.
* @arg SPI_FLAG_MODF: Mode Fault flag.
* @arg SPI_FLAG_CRCERR: CRC Error flag.
* @arg I2S_FLAG_UDR: Underrun Error flag.
* @arg I2S_FLAG_CHSIDE: Channel Side flag.
* @retval The new state of SPI_I2S_FLAG (SET or RESET).
*/
FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG));
/* Check the status of the specified SPI/I2S flag */
if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET)
{
/* SPI_I2S_FLAG is set */
bitstatus = SET;
}
else
{
/* SPI_I2S_FLAG is reset */
bitstatus = RESET;
}
/* Return the SPI_I2S_FLAG status */
return bitstatus;
}
/**
* @brief Clears the SPIx CRC Error (CRCERR) flag.
* @param SPIx: where x can be
* - 1, 2 or 3 in SPI mode
* @param SPI_I2S_FLAG: specifies the SPI flag to clear.
* This function clears only CRCERR flag.
* @note
* - OVR (OverRun error) flag is cleared by software sequence: a read
* operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read
* operation to SPI_SR register (SPI_I2S_GetFlagStatus()).
* - UDR (UnderRun error) flag is cleared by a read operation to
* SPI_SR register (SPI_I2S_GetFlagStatus()).
* - MODF (Mode Fault) flag is cleared by software sequence: a read/write
* operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a
* write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI).
* @retval None
*/
void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG)
{
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG));
/* Clear the selected SPI CRC Error (CRCERR) flag */
SPIx->SR = (uint16_t)~SPI_I2S_FLAG;
}
/**
* @brief Checks whether the specified SPI/I2S interrupt has occurred or not.
* @param SPIx: where x can be
* - 1, 2 or 3 in SPI mode
* - 2 or 3 in I2S mode
* @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to check.
* This parameter can be one of the following values:
* @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt.
* @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt.
* @arg SPI_I2S_IT_OVR: Overrun interrupt.
* @arg SPI_IT_MODF: Mode Fault interrupt.
* @arg SPI_IT_CRCERR: CRC Error interrupt.
* @arg I2S_IT_UDR: Underrun Error interrupt.
* @retval The new state of SPI_I2S_IT (SET or RESET).
*/
ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT)
{
ITStatus bitstatus = RESET;
uint16_t itpos = 0, itmask = 0, enablestatus = 0;
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT));
/* Get the SPI/I2S IT index */
itpos = 0x01 << (SPI_I2S_IT & 0x0F);
/* Get the SPI/I2S IT mask */
itmask = SPI_I2S_IT >> 4;
/* Set the IT mask */
itmask = 0x01 << itmask;
/* Get the SPI_I2S_IT enable bit status */
enablestatus = (SPIx->CR2 & itmask) ;
/* Check the status of the specified SPI/I2S interrupt */
if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus)
{
/* SPI_I2S_IT is set */
bitstatus = SET;
}
else
{
/* SPI_I2S_IT is reset */
bitstatus = RESET;
}
/* Return the SPI_I2S_IT status */
return bitstatus;
}
/**
* @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit.
* @param SPIx: where x can be
* - 1, 2 or 3 in SPI mode
* @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear.
* This function clears only CRCERR interrupt pending bit.
* @note
* - OVR (OverRun Error) interrupt pending bit is cleared by software
* sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData())
* followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()).
* - UDR (UnderRun Error) interrupt pending bit is cleared by a read
* operation to SPI_SR register (SPI_I2S_GetITStatus()).
* - MODF (Mode Fault) interrupt pending bit is cleared by software sequence:
* a read/write operation to SPI_SR register (SPI_I2S_GetITStatus())
* followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable
* the SPI).
* @retval None
*/
void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT)
{
uint16_t itpos = 0;
/* Check the parameters */
assert_param(IS_SPI_ALL_PERIPH(SPIx));
assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT));
/* Get the SPI IT index */
itpos = 0x01 << (SPI_I2S_IT & 0x0F);
/* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */
SPIx->SR = (uint16_t)~itpos;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/

2890
stm_lib/src/stm32f10x_tim.c 100644
Wyświetl plik

Plik diff jest za duży Load Diff

1058
stm_lib/src/stm32f10x_usart.c 100644
Wyświetl plik

Plik diff jest za duży Load Diff