diff --git a/include/sr9nci.config b/include/sr9nci.config
index c070aeb..a0e50d6 100644
--- a/include/sr9nci.config
+++ b/include/sr9nci.config
@@ -12,11 +12,13 @@
 //#define _DBG_TRACE
 
 // Uncomment to enable all meteo functionality. TX20 anemometer, dallas termometer, MS5611 pressure sens
-//#define _METEO
+#define _METEO
 #define _DIGI		// Comment this do disable WIDE1-1 digipeating
 #define _DIGI_ONLY_789
 
 //#define _DALLAS_AS_TELEM
+//#define _DALLAS_SPLIT_PIN
+
 //#define _VICTRON
 
 //#define _MUTE_RF	// TODO: Not yet implemented - This will make station RXonly and disable all data transmission
@@ -51,16 +53,16 @@
 #define _WIDE21_PATH	// CALL-S>AKLPRZ,WIDE2-1:data
 
 // Comment this to disable beacon auto sending during startup (this can be risky if RF feedback occur)
-#define _BCN_ON_STARTUP
+//#define _BCN_ON_STARTUP
 
-#define _WX_INTERVAL 4		// WX packet interval in minutes
+#define _WX_INTERVAL 3		// WX packet interval in minutes
 #define _BCN_INTERVAL 15	// Own beacon interval in minutes
 
 //#define _PTT_PUSHPULL // Uncomment this if you want PTT line to work as Push-pull instead of Open Drain
 #define _SERIAL_BAUDRATE 9600
 
 // Transmitting delay
-#define _DELAY_BASE 19	// * 50ms. For example setting 10 gives 500msec delay. Maximum value is 20
+#define _DELAY_BASE 20	// * 50ms. For example setting 10 gives 500msec delay. Maximum value is 20
 //#define _RANDOM_DELAY	// adds random delay TO fixed time set by _DELAY_BASE. This additional time can be
 						// from 100ms up to 1 sec in 100ms steps. Values are drawn from samples going from ADC
 						// so it is better to use Unsquelched output in radio to provide much more randomness
diff --git a/src/main.c b/src/main.c
index 6c1fcc4..9bd1c79 100644
--- a/src/main.c
+++ b/src/main.c
@@ -188,11 +188,19 @@ main(int argc, char* argv[])
 
 #ifdef _METEO
   dht22_init();
-  dallas_init(GPIOC, GPIO_Pin_11, GPIO_PinSource11);
-  TX20Init();
+	#ifndef _DALLAS_SPLIT_PIN
+	  dallas_init(GPIOC, GPIO_Pin_6, GPIO_PinSource6);
+	#else
+	  dallas_init(GPIOC, GPIO_Pin_11, GPIO_PinSource11);
+	#endif
+	TX20Init();
 #endif
 #ifdef _DALLAS_AS_TELEM
-  dallas_init(GPIOC, GPIO_Pin_11, GPIO_PinSource11); // B5 output, B6 input
+	#ifndef _DALLAS_SPLIT_PIN
+	  dallas_init(GPIOC, GPIO_Pin_6, GPIO_PinSource6);
+	#else
+	  dallas_init(GPIOC, GPIO_Pin_11, GPIO_PinSource11);
+	#endif
 #endif
 
   // initializing UART drvier