47 wiersze
1.8 KiB
Plaintext
47 wiersze
1.8 KiB
Plaintext
If you are upgrading from an earlier version, make sure you followed the upgrade
|
|
instructions for that version.
|
|
|
|
Upgrade to 0.91
|
|
|
|
Starting with 0.91 we offer an online configuration tool. You find it here:
|
|
|
|
http://www.repetier.com/firmware/v091/
|
|
|
|
Once you have created a configuration with that tool, you can upload these
|
|
configurations to the latest version and it will add all missing options and
|
|
highlight them for inspections. Unfortuanetly this relies on a special comment
|
|
conteining configuration data, so uploading existing Configuration.h files
|
|
will not work.
|
|
|
|
|
|
Upgrade to 0.80
|
|
|
|
The EEPROM storage uses now a checksum to help switching from other firmwares. This
|
|
will cause your eeprom to get overwritten with the first upload, so save you old values.
|
|
|
|
The configuration has also made significant changes. Copy your values into the new
|
|
Configuration.h file. Watch out for speeds - they are now all mm/sec!
|
|
Also watch out for the PID values. They are now floating point and don't include
|
|
multiplier values. Best is to do a M303 for autodetect new values.
|
|
|
|
|
|
Upgrade to 0.70
|
|
|
|
The configurations files Configuration.h and uiconfig.h have undergone larger
|
|
modifications. The best is to use the new config files and copy your values into them.
|
|
If you don't use the printer user interface you don't need to modify uiconfig.h
|
|
|
|
The new firmware stores one more parameter into EEPROM. This place is not initalized
|
|
with a useful value, so you must explicitly overwrite it if you are using EEPROM. The
|
|
easiest way is to send the following code after the first upload:
|
|
|
|
M206 T3 X0 P196
|
|
|
|
The advance algorithm changed. Now the new linear term Advance-L is preferred and the
|
|
quadratic term is now disabled by default. If you still want to use the quadratic term
|
|
add a
|
|
|
|
#define ENABLE_QUADRATIC_ADVANCE
|
|
|
|
to the configuration.
|