47 wiersze
1.6 KiB
Plaintext
47 wiersze
1.6 KiB
Plaintext
The serial implementation of the arduino is not optimal. In the subfolders
|
|
Sanguino and arduino are faster implementations of these. Copy the files
|
|
to the proper places of your arduino installations to replace the existing ones.
|
|
You find them at
|
|
|
|
Arduino Pre 1.0 version:
|
|
------------------------
|
|
<Installpath>/hardware/arduino/cores/arduino
|
|
|
|
Arduino 1.0+ version:
|
|
---------------------
|
|
<Installpath>/hardware/arduino/cores/arduino
|
|
|
|
The input buffer length is 64 bytes with this version. Make sure to reduce
|
|
the buffer length in Repetier-Host or you will get overflows with unwanted
|
|
results!
|
|
|
|
Arduino 1.0.3 changed the handling a bit to allows setting stop bits/parity/data-bits.
|
|
If you mind losing this functionality, dont copy the files!
|
|
|
|
Sanguino pre 1.0 version:
|
|
-------------------------
|
|
<Installpath>/hardware/Sanguino/cores/arduino
|
|
|
|
Sanguino 1.0+ version:
|
|
----------------------
|
|
<Installpath>/hardware/Sanguino/cores/arduino
|
|
Make sure to copy the Arduino.h which is needed to compile on Arduino 1.0.
|
|
Replace the original boards.txt with the boards.txt so uploading files works.
|
|
|
|
gen7 pre 1.0 version:
|
|
---------------------
|
|
<Installpath>/hardware/Gen7/cores/arduino
|
|
|
|
gen7 1.0+ version:
|
|
------------------
|
|
<Installpath>/hardware/Gen7/cores/arduino
|
|
Make sure to copy the Arduino.h which is needed to compile on Arduino 1.0.
|
|
Replace the original boards.txt with the boards.txt so uploading files works.
|
|
|
|
============================
|
|
|
|
The versions are the Arduino IDE versions not the board versions!
|
|
|
|
The wiring files are fully compatible with the original files. Only the slow modulo
|
|
operator % is replaced by a fast "and" operation.
|
|
|