Update README.md
rodzic
f15ec540fd
commit
db25a431dc
|
@ -40,9 +40,8 @@ The previous version (based on repetier v0.91) can be found [here](https://githu
|
|||
2. Turn the machine on and wait a few seconds then turn it off again. The machine will have been flashed removing the current stock firmware and allowing it to be detected as a normal arduino DUE. NOTE: Windows users may need to install drivers to detect the board. Consult the Voltivo forums.
|
||||
Note : points 1 and 2 are only needed to wipe the stock fw or a corrupted fw, for update they are not necessary.
|
||||
Note 2: remove the jumper before flashing if still there
|
||||
3. Use an arduino IDE supporting arduino DUE, [1.8.0](https://www.arduino.cc/en/Main/Software) with Due 1.6.8 module from board manager [FAQ#166](https://github.com/luc-github/Repetier-Firmware-0.92/issues/166).
|
||||
<H3 style="color:red">Do not use 1.5.8 it is not supported and will give compilation [error: FAQ#201](https://github.com/luc-github/Repetier-Firmware-0.92/issues/201)</H3>
|
||||
4. Update variants.cpp arduino file with the one present in src\ArduinoDUE\AdditionalArduinoFile according your IDE version
|
||||
3. Use an arduino IDE supporting arduino DUE, [1.8.0](https://www.arduino.cc/en/Main/Software) with Due 1.6.8 module from board manager [FAQ#166](https://github.com/luc-github/Repetier-Firmware-0.92/issues/166).<H3 style="color:red">Do not use 1.5.8 it is not supported and will give compilation [error: FAQ#201](https://github.com/luc-github/Repetier-Firmware-0.92/issues/201)</H3>
|
||||
4. Update variants.cpp/USBCore.cpp arduino files with the ones present in src\ArduinoDUE\AdditionalArduinoFile according your IDE version.
|
||||
NOTE: You do not need to compile arduino from source these files are in the arduino directory structure [FAQ#114](https://github.com/luc-github/Repetier-Firmware-0.92/issues/114).
|
||||
5. Open the project file named repetier.ino located in src\ArduinoDUE\Repetier directory in the arduino IDE.
|
||||
6. Modify the DAVINCI define in Configuration.h file to match your targeted Da Vinci. See below.
|
||||
|
|
Ładowanie…
Reference in New Issue