From 1b3577489a66e4d5728c987a85ab5798ef8fcb15 Mon Sep 17 00:00:00 2001 From: Gregory Boyce Date: Sat, 9 Jul 2016 09:29:18 -0400 Subject: [PATCH 1/2] Corrected USBCore.cpp filename --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index fca03a4..ae8ab26 100644 --- a/README.md +++ b/README.md @@ -42,7 +42,7 @@ The previous version (based on repetier v0.91) can be found [here](https://githu 1. With the machine off remove the back panel and short the jumper JP1 or J37 depending on model. Some Boards do not have jumper pins exposed but can still be shorted with a conductive wire. 2. Turn the machine on and wait a few seconds then turn it off again. The machine will have been flashed removing the current stock firmware and allowing it to be detected as a normal arduino DUE. NOTE: Windows users may need to install drivers to detect the board. Consult the Voltivo forums. 3. Use an arduino IDE supporting arduino DUE, [version 1.5.8+ or 1.6.5](http://arduino.cc/en/Main/OldSoftwareReleases), 1.6.0+ bring several issues, but 1.6.5 seems working well with Due 1.6.4 module for board manager. -4. Update arduino files (variants.cpp and USBcore.cpp) with the one(s) present in src\ArduinoDUE\AdditionalArduinoFiles\1.5.8. or in src\ArduinoDUE\AdditionalArduinoFiles\1.6.5 according your IDE version +4. Update arduino files (variants.cpp and USBCore.cpp) with the one(s) present in src\ArduinoDUE\AdditionalArduinoFiles\1.5.8. or in src\ArduinoDUE\AdditionalArduinoFiles\1.6.5 according your IDE version NOTE: You do not need to compile arduino from source these files are in the arduino directory structure. On Mac you will need to right click on the Arduino.app to Show Package Contents. 5. Open the project file named repetier.ino located in src\ArduinoDUE\Repetier directory in the arduino IDE. 6. Modify the DAVINCI define in Configuration.h file to match your targeted Da Vinci. See below. From 09167689d42f2d72782463348079468134472142 Mon Sep 17 00:00:00 2001 From: Gregory Boyce Date: Sat, 9 Jul 2016 09:56:27 -0400 Subject: [PATCH 2/2] Corrected reference to configuration.h instead of Configuration.h --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index ae8ab26..edf1ae8 100644 --- a/README.md +++ b/README.md @@ -58,7 +58,7 @@ You can do so by homeing all axis, turning off the printer and manually adjustin For information on upgrading from or reverting to stock FW and other procedures please check [Da Vinci Voltivo forum](http://voltivo.com/forum/davinci).

:warning:There is no known way to revert to stock FW on 1.0A/2.0A/AiO until today.

-Do not forget to modify the configuration.h to match your targeted Da Vinci: 1.0, 2.0 SF or 2.0. +Do not forget to modify the Configuration.h to match your targeted Da Vinci: 1.0, 2.0 SF or 2.0. for basic installation just change : '#define DAVINCI 1 // "1" For DAVINCI 1.0, "2" For DAVINCI 2.0 with 1 FAN, "3" For DAVINCI 2.0 with 2 FANS, 4 For AiO （no scanner)' 0 for not Davinci board (like DUE/RADDS)