rodzic
3e10ba90fa
commit
09092146c1
|
@ -15,7 +15,7 @@ Here are just a few of the benifits of using this firmware:
|
|||
* It works stand alone if you use a WIFI SD Card.
|
||||
* It allows the use of clear ABS (by disabling optical sensors), as well as other arbitrary filament brands/types as temperatures can be controlled freely and there is no requirement for chiped cartridges.
|
||||
|
||||
You can find more info on the [Voltivo forum](http://voltivo.com/forum/davinci-firmware).
|
||||
You can find more info on the [Voltivo forum](http://voltivo.com/forum/davinci-firmware).
|
||||
|
||||
The current firmware is based on [repetier Firmware](https://github.com/repetier/Repetier-Firmware) 0.92 : [bgm370 Da Vinci 1.0 FW](https://github.com/bgm370/Repetier-Firmware)
|
||||
Sources are [here](https://github.com/luc-github/Repetier-Firmware-0.92)
|
||||
|
@ -58,6 +58,10 @@ Support for 1.0A and 2.0A: need to change <CODE>#define MODEL 0</CODE> to <CO
|
|||
To repurpose the main Extruder cooling fan to be controlled VIA G-Code instructions M106/M107:
|
||||
Set REPURPOSE_FAN_TO_COOL_EXTRUSIONS to 1, do not forget to add a fan with power source to cool extruder permanently if you use this option.
|
||||
|
||||
Another excellent tutorial for flashing and installation is here from Jake : http://voltivo.com/forum/davinci-peersupport/501-da-vinci-setup-guide-from-installation-to-wireless-printing
|
||||
|
||||
Or a great video done by Daniel Gonos: https://www.youtube.com/watch?v=rjuCvlnpB7M
|
||||
|
||||
***
|
||||
##TODO
|
||||
[Check issue list](https://github.com/luc-github/Repetier-Firmware-0.92/issues)
|
||||
|
|
Ładowanie…
Reference in New Issue