diff --git a/Default-configuration.md b/Default-configuration.md
index 43f4d2c..72caf73 100644
--- a/Default-configuration.md
+++ b/Default-configuration.md
@@ -20,6 +20,17 @@ The table below shows default values of parameters that are common accross all s
 | RFM95/97        | 915.0 MHz         | 48.0 kbps | 50.0 kHz            | 125.0 kHz          | 10 dBm       | 16 bits         |
 | RFM96/98        | 434.0 MHz         | 48.0 kbps | 50.0 kHz            | 125.0 kHz          | 10 dBm       | 16 bits         |
 
+### LoRa modules
+The table below shows default values of parameters that are common accross all sub-GHz LoRa modules.
+
+| Module type     | Carrier frequency | Bandwidth | Spreading factor | Coding rate | Sync word       | Output power | Preamble length |
+| --------------- | ----------------- | --------- | ---------------- | ----------- | --------------- | ------------ | --------------- |
+| SX126x          | 434.0 MHz         | 125.0 kHz | 9                | 4/7         | private network | 10 dBm       | 8 symbols       |
+| SX1272/73       | 915.0 MHz         | 125.0 kHz | 9                | 4/7         | private network | 10 dBm       | 8 symbols       |
+| SX1276/77/78/79 | 434.0 MHz         | 125.0 kHz | 9                | 4/7         | private network | 10 dBm       | 8 symbols       |
+| RFM95/97        | 915.0 MHz         | 125.0 kHz | 9                | 4/7         | private network | 10 dBm       | 8 symbols       |
+| RFM96/98        | 434.0 MHz         | 125.0 kHz | 9                | 4/7         | private network | 10 dBm       | 8 symbols       |
+
 ## Modules
 
 Legend:
@@ -141,11 +152,11 @@ Si443x::setEncoding(RADIOLIB_ENCODING_NRZ);
   * Coding rate: 4/7
   * Sync word: SX126X_SYNC_WORD_PRIVATE (0x12)
   * Output power: 10 dBm
-  * Over-current protection: 60.0 mA
   * Preamble length: 8 symbols
   * TCXO reference voltage: 1.6 V (SX126x module with TCXO)
   * LDO regulator mode: disabled (SX126x module with DC-DC power supply)
 * Other:
+  * Over-current protection: 60.0 mA
   * DIO2 as RF switch control: enabled
   * LoRa header mode: explicit
   * LoRa CRC: enabled, 2 bytes
@@ -154,7 +165,8 @@ Si443x::setEncoding(RADIOLIB_ENCODING_NRZ);
 
 Equivalent to:
 ```c++
-SX126x::begin(434.0, 125.0, 9, 7, SX126X_SYNC_WORD_PRIVATE, 10, 60.0, 8, 1.6, false);
+SX126x::begin(434.0, 125.0, 9, 7, SX126X_SYNC_WORD_PRIVATE, 10, 8, 1.6, false);
+SX126x::setCurrentLimit(60.0);
 SX126x::setDio2AsRfSwitch(true);
 SX126x::explicitHeader();
 SX126x::setCRC(2);
@@ -198,18 +210,19 @@ SX126x::setDio2AsRfSwitch(true);
   * Spreading factor: 9
   * Coding rate: 4/7
   * Sync word: SX127X_SYNC_WORD (0x12)
-  * Output power: 17 dBm
-  * Over-current protection: 100 mA
+  * Output power: 10 dBm
   * Preamble length: 8 symbols
   * Gain: 0 (automatic gain control enabled)
-* Other: -
+* Other:
+  * Over-current protection: 60 mA
 * Inaccessible:
   * LoRa header mode: explicit
   * Frequency hopping: disabled
 
 Equivalent to (assuming SX1278):
 ```c++
-SX1278::begin(434.0, 125.0, 9, 7, SX127X_SYNC_WORD, 17, 100, 8, 0);
+SX1278::begin(434.0, 125.0, 9, 7, SX127X_SYNC_WORD, 10, 8, 0);
+SX127x::setCurrentLimit(60);
 ```
 
 ### SX127x/RFM9x - FSK modem