/*
   RadioLib APRS Mic-E Example

   This example sends APRS position reports
   encoded in the Mic-E format using SX1278's
   FSK modem. The data is modulated as AFSK
   at 1200 baud using Bell 202 tones.

   DO NOT transmit in APRS bands unless
   you have a ham radio license!

   Other modules that can be used for APRS:
    - SX127x/RFM9x
    - RF69
    - SX1231
    - CC1101
    - nRF24
    - Si443x/RFM2x
    - SX126x/LLCC68 (only devices without TCXO!)

   For default module settings, see the wiki page
   https://github.com/jgromes/RadioLib/wiki/Default-configuration

   For full API reference, see the GitHub Pages
   https://jgromes.github.io/RadioLib/
*/

// include the library
#include <RadioLib.h>

// SX1278 has the following connections:
// NSS pin:   10
// DIO0 pin:  2
// RESET pin: 9
// DIO1 pin:  3
SX1278 radio = new Module(10, 2, 9, 3);

// or using RadioShield
// https://github.com/jgromes/RadioShield
//SX1278 radio = RadioShield.ModuleA;

// create AFSK client instance using the FSK module
// this requires connection to the module direct
// input pin, here connected to Arduino pin 5
// SX127x/RFM9x:  DIO2
// RF69:          DIO2
// SX1231:        DIO2
// CC1101:        GDO2
// Si443x/RFM2x:  GPIO
// SX126x/LLCC68: DIO2
AFSKClient audio(&radio, 5);

// create AX.25 client instance using the AFSK instance
AX25Client ax25(&audio);

// create APRS client instance using the AX.25 client
APRSClient aprs(&ax25);

void setup() {
  Serial.begin(9600);

  // initialize SX1278
  // NOTE: moved to ISM band on purpose
  //       DO NOT transmit in APRS bands without ham radio license!
  Serial.print(F("[SX1278] Initializing ... "));
  int state = radio.beginFSK();

  // when using one of the non-LoRa modules for AX.25
  // (RF69, CC1101, Si4432 etc.), use the basic begin() method
  // int state = radio.begin();

  if(state == RADIOLIB_ERR_NONE) {
    Serial.println(F("success!"));
  } else {
    Serial.print(F("failed, code "));
    Serial.println(state);
    while(true);
  }

  // initialize AX.25 client
  Serial.print(F("[AX.25] Initializing ... "));
  // source station callsign:     "N7LEM"
  // source station SSID:         0
  // preamble length:             8 bytes
  state = ax25.begin("N7LEM");
  if(state == RADIOLIB_ERR_NONE) {
    Serial.println(F("success!"));
  } else {
    Serial.print(F("failed, code "));
    Serial.println(state);
    while(true);
  }

  // initialize APRS client
  Serial.print(F("[APRS] Initializing ... "));
  // symbol:                      '>' (car)
  state = aprs.begin('>');
  if(state == RADIOLIB_ERR_NONE) {
    Serial.println(F("success!"));
  } else {
    Serial.print(F("failed, code "));
    Serial.println(state);
    while(true);
  }
}

void loop() {
  Serial.print(F("[APRS] Sending Mic-E position ... "));
  int state = aprs.sendMicE(49.1945, 16.6000, 120, 10, RADIOLIB_APRS_MIC_E_TYPE_EN_ROUTE);
  if(state == RADIOLIB_ERR_NONE) {
    Serial.println(F("success!"));
  } else {
    Serial.print(F("failed, code "));
    Serial.println(state);
  }

  // wait one minute before transmitting again
  delay(60000);
}