| .. |
|
codecs
|
Add support for APRS weather reports. Fix incorrect atmospheric pressure values with BMP280.
|
2021-11-16 10:11:54 +02:00 |
|
drivers
|
Allow relaying of GPS NMEA output to the external RS41 serial port to be integrated with other tracker hardware. Allow GPS position recording (by enabling GPS serial port interrupts) during CW and Horus transmissions to avoid transmitting stale GPS data.
|
2021-11-11 18:15:52 +02:00 |
|
hal
|
Allow relaying of GPS NMEA output to the external RS41 serial port to be integrated with other tracker hardware. Allow GPS position recording (by enabling GPS serial port interrupts) during CW and Horus transmissions to avoid transmitting stale GPS data.
|
2021-11-11 18:15:52 +02:00 |
|
syscalls
|
Fix issues with firmware heap and stack colliding. Refactor radio transmission code into multiples files. Add more data from GPS to APRS packets. Get more data from GPS (climb/course). Implement simple GPS time-based scheduling of digital modes that require accurate timing. Write some initial documentation for building/flashing the firmware.
|
2020-09-03 22:12:43 +03:00 |
|
CMakeLists.txt
|
Add simple templating and rotating messages per mode. Finish support for FSQ modes. Attempt to get power-off button working (WIP).
|
2020-09-10 22:57:41 +03:00 |
|
arm-gcc-link.ld
|
Fix issues with firmware heap and stack colliding. Refactor radio transmission code into multiples files. Add more data from GPS to APRS packets. Get more data from GPS (climb/course). Implement simple GPS time-based scheduling of digital modes that require accurate timing. Write some initial documentation for building/flashing the firmware.
|
2020-09-03 22:12:43 +03:00 |
|
bmp280_handler.c
|
Add support for APRS weather reports. Fix incorrect atmospheric pressure values with BMP280.
|
2021-11-16 10:11:54 +02:00 |
|
bmp280_handler.h
|
…
|
|
|
config.c
|
Add support for APRS weather reports. Fix incorrect atmospheric pressure values with BMP280.
|
2021-11-16 10:11:54 +02:00 |
|
config.h
|
Zero out GPS location if there is no GPS fix. Add option to repeat transmission of each mode.
|
2021-11-30 17:42:51 +02:00 |
|
config_internal.h
|
Allow relaying of GPS NMEA output to the external RS41 serial port to be integrated with other tracker hardware. Allow GPS position recording (by enabling GPS serial port interrupts) during CW and Horus transmissions to avoid transmitting stale GPS data.
|
2021-11-11 18:15:52 +02:00 |
|
gps.h
|
Add support for Horus 4FSK modulation. Increase APRS preamble size to improve reception. Fix slowness in I2C initialization. Fix incorrect GPS settings for airborne usage. Additional minor code clean-up and refactoring.
|
2021-08-11 23:24:30 +03:00 |
|
locator.c
|
Extend GPS functionality and APRS message contents. Add locator calculation utility for WSPR/FT8. Fix reading of Si4032 temperature.
|
2020-09-01 22:56:34 +03:00 |
|
locator.h
|
Extend GPS functionality and APRS message contents. Add locator calculation utility for WSPR/FT8. Fix reading of Si4032 temperature.
|
2020-09-01 22:56:34 +03:00 |
|
log.c
|
Add support for Horus 4FSK modulation. Increase APRS preamble size to improve reception. Fix slowness in I2C initialization. Fix incorrect GPS settings for airborne usage. Additional minor code clean-up and refactoring.
|
2021-08-11 23:24:30 +03:00 |
|
log.h
|
Add support for Horus 4FSK modulation. Increase APRS preamble size to improve reception. Fix slowness in I2C initialization. Fix incorrect GPS settings for airborne usage. Additional minor code clean-up and refactoring.
|
2021-08-11 23:24:30 +03:00 |
|
main.c
|
Allow relaying of GPS NMEA output to the external RS41 serial port to be integrated with other tracker hardware. Allow GPS position recording (by enabling GPS serial port interrupts) during CW and Horus transmissions to avoid transmitting stale GPS data.
|
2021-11-11 18:15:52 +02:00 |
|
payload.h
|
Add simple templating and rotating messages per mode. Finish support for FSQ modes. Attempt to get power-off button working (WIP).
|
2020-09-10 22:57:41 +03:00 |
|
radio.c
|
Zero out GPS location if there is no GPS fix. Add option to repeat transmission of each mode.
|
2021-11-30 17:42:51 +02:00 |
|
radio.h
|
Add support for Horus 4FSK modulation. Increase APRS preamble size to improve reception. Fix slowness in I2C initialization. Fix incorrect GPS settings for airborne usage. Additional minor code clean-up and refactoring.
|
2021-08-11 23:24:30 +03:00 |
|
radio_internal.h
|
Zero out GPS location if there is no GPS fix. Add option to repeat transmission of each mode.
|
2021-11-30 17:42:51 +02:00 |
|
radio_payload_aprs_position.c
|
Add support for APRS weather reports. Fix incorrect atmospheric pressure values with BMP280.
|
2021-11-16 10:11:54 +02:00 |
|
radio_payload_aprs_position.h
|
Add support for APRS weather reports. Fix incorrect atmospheric pressure values with BMP280.
|
2021-11-16 10:11:54 +02:00 |
|
radio_payload_aprs_weather.c
|
Add support for APRS weather reports. Fix incorrect atmospheric pressure values with BMP280.
|
2021-11-16 10:11:54 +02:00 |
|
radio_payload_aprs_weather.h
|
Add support for APRS weather reports. Fix incorrect atmospheric pressure values with BMP280.
|
2021-11-16 10:11:54 +02:00 |
|
radio_payload_cw.c
|
Add support for morse code (CW)
|
2021-08-13 00:42:50 +03:00 |
|
radio_payload_cw.h
|
Add support for morse code (CW)
|
2021-08-13 00:42:50 +03:00 |
|
radio_payload_fsq.c
|
Add simple templating and rotating messages per mode. Finish support for FSQ modes. Attempt to get power-off button working (WIP).
|
2020-09-10 22:57:41 +03:00 |
|
radio_payload_fsq.h
|
Add simple templating and rotating messages per mode. Finish support for FSQ modes. Attempt to get power-off button working (WIP).
|
2020-09-10 22:57:41 +03:00 |
|
radio_payload_horus_v1.c
|
Fix potential deadlocks in I2C code and add bus reset code. Add continuous transmit mode for Horus 4FSK V1 and V2 modes, use alternative preamble byte for V2. Improve configuration for continuous transmissions. Extend default custom data content for Horus V2 mode.
|
2021-11-10 18:49:29 +02:00 |
|
radio_payload_horus_v1.h
|
Fix potential deadlocks in I2C code and add bus reset code. Add continuous transmit mode for Horus 4FSK V1 and V2 modes, use alternative preamble byte for V2. Improve configuration for continuous transmissions. Extend default custom data content for Horus V2 mode.
|
2021-11-10 18:49:29 +02:00 |
|
radio_payload_horus_v2.c
|
Fix potential deadlocks in I2C code and add bus reset code. Add continuous transmit mode for Horus 4FSK V1 and V2 modes, use alternative preamble byte for V2. Improve configuration for continuous transmissions. Extend default custom data content for Horus V2 mode.
|
2021-11-10 18:49:29 +02:00 |
|
radio_payload_horus_v2.h
|
Fix potential deadlocks in I2C code and add bus reset code. Add continuous transmit mode for Horus 4FSK V1 and V2 modes, use alternative preamble byte for V2. Improve configuration for continuous transmissions. Extend default custom data content for Horus V2 mode.
|
2021-11-10 18:49:29 +02:00 |
|
radio_payload_jtencode.c
|
Add simple templating and rotating messages per mode. Finish support for FSQ modes. Attempt to get power-off button working (WIP).
|
2020-09-10 22:57:41 +03:00 |
|
radio_payload_jtencode.h
|
Add simple templating and rotating messages per mode. Finish support for FSQ modes. Attempt to get power-off button working (WIP).
|
2020-09-10 22:57:41 +03:00 |
|
radio_payload_wspr.c
|
Add simple templating and rotating messages per mode. Finish support for FSQ modes. Attempt to get power-off button working (WIP).
|
2020-09-10 22:57:41 +03:00 |
|
radio_payload_wspr.h
|
Fix issues with firmware heap and stack colliding. Refactor radio transmission code into multiples files. Add more data from GPS to APRS packets. Get more data from GPS (climb/course). Implement simple GPS time-based scheduling of digital modes that require accurate timing. Write some initial documentation for building/flashing the firmware.
|
2020-09-03 22:12:43 +03:00 |
|
radio_si4032.c
|
Fix potential deadlocks in I2C code and add bus reset code. Add continuous transmit mode for Horus 4FSK V1 and V2 modes, use alternative preamble byte for V2. Improve configuration for continuous transmissions. Extend default custom data content for Horus V2 mode.
|
2021-11-10 18:49:29 +02:00 |
|
radio_si4032.h
|
Add support for Horus 4FSK modulation. Increase APRS preamble size to improve reception. Fix slowness in I2C initialization. Fix incorrect GPS settings for airborne usage. Additional minor code clean-up and refactoring.
|
2021-08-11 23:24:30 +03:00 |
|
radio_si5351.c
|
Add support for Horus 4FSK v2 mode with custom data fields for BMP280 sensor. Add support for CW and 4FSK v1+v2 (50 baud) on HF/VHF using the Si5351 clock generator.
|
2021-09-14 22:47:39 +03:00 |
|
radio_si5351.h
|
Add support for Horus 4FSK v2 mode with custom data fields for BMP280 sensor. Add support for CW and 4FSK v1+v2 (50 baud) on HF/VHF using the Si5351 clock generator.
|
2021-09-14 22:47:39 +03:00 |
|
si5351_handler.cpp
|
Add support for Horus 4FSK v2 mode with custom data fields for BMP280 sensor. Add support for CW and 4FSK v1+v2 (50 baud) on HF/VHF using the Si5351 clock generator.
|
2021-09-14 22:47:39 +03:00 |
|
si5351_handler.h
|
Add support for Horus 4FSK v2 mode with custom data fields for BMP280 sensor. Add support for CW and 4FSK v1+v2 (50 baud) on HF/VHF using the Si5351 clock generator.
|
2021-09-14 22:47:39 +03:00 |
|
si5351_test.cpp
|
…
|
|
|
si5351_test.h
|
…
|
|
|
telemetry.c
|
Zero out GPS location if there is no GPS fix. Add option to repeat transmission of each mode.
|
2021-11-30 17:42:51 +02:00 |
|
telemetry.h
|
Add support for Horus 4FSK modulation. Increase APRS preamble size to improve reception. Fix slowness in I2C initialization. Fix incorrect GPS settings for airborne usage. Additional minor code clean-up and refactoring.
|
2021-08-11 23:24:30 +03:00 |
|
template.c
|
Add support for Horus 4FSK modulation. Increase APRS preamble size to improve reception. Fix slowness in I2C initialization. Fix incorrect GPS settings for airborne usage. Additional minor code clean-up and refactoring.
|
2021-08-11 23:24:30 +03:00 |
|
template.h
|
Add simple templating and rotating messages per mode. Finish support for FSQ modes. Attempt to get power-off button working (WIP).
|
2020-09-10 22:57:41 +03:00 |
|
utils.c
|
Add simple templating and rotating messages per mode. Finish support for FSQ modes. Attempt to get power-off button working (WIP).
|
2020-09-10 22:57:41 +03:00 |
|
utils.h
|
Add simple templating and rotating messages per mode. Finish support for FSQ modes. Attempt to get power-off button working (WIP).
|
2020-09-10 22:57:41 +03:00 |
9092c1a1b3