---------------------------------------------------------------------------------- -- Engineer: David Banks -- -- Create Date: 15/7/2018 -- Module Name: RGBtoHDMI CPLD -- Project Name: RGBtoHDMI -- Target Devices: XC9572XL -- -- Version: 1.0 -- ---------------------------------------------------------------------------------- library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; entity RGBtoHDMI is Port ( -- From Atom L/PA/PB Comparators AL_I: in std_logic; AH_I: in std_logic; BL_I: in std_logic; BH_I: in std_logic; L_I: in std_logic; HS_I: in std_logic; FS_I: in std_logic; CSS_I: in std_logic; SYNC_I: in std_logic; -- To Atom L/PA/PB Comparators clamp: out std_logic; -- From Pi clk: in std_logic; sp_clk: in std_logic; sp_clken: in std_logic; sp_data: in std_logic; -- To PI GPIO quad: out std_logic_vector(11 downto 0); psync: out std_logic; csync: out std_logic; -- User interface version: in std_logic ); end RGBtoHDMI; architecture Behavorial of RGBtoHDMI is -- Version number: Design_Major_Minor -- Design: 0 = Normal CPLD, 1 = Alternative CPLD, 2=Atom CPLD constant VERSION_NUM : std_logic_vector(11 downto 0) := x"223"; -- Default offset to start sampling at constant default_offset : unsigned(8 downto 0) := to_unsigned(512 - 255 + 8, 9); -- Turn on back porch clamp constant atom_clamp_start : unsigned(8 downto 0) := to_unsigned(512 - 255 + 48, 9); -- Turn off back port clamo constant atom_clamp_end : unsigned(8 downto 0) := to_unsigned(512 - 255 + 248, 9); -- Sampling points constant INIT_SAMPLING_POINTS : std_logic_vector(5 downto 0) := "110000"; signal shift_R : std_logic_vector(1 downto 0); signal shift_G : std_logic_vector(1 downto 0); signal shift_B : std_logic_vector(1 downto 0); signal shift_X : std_logic_vector(1 downto 0); -- The sampling counter runs at 8x pixel clock of 7.15909MHz = 56.272720MHz -- -- The luminance signal is sampled every 8 counts (bits 2..0) -- The chromance signal is sampled every 16 counts (bits 3..0) -- The pixel shift register is shifter every 4 counts (bits 1..0) -- (i.e. each pixel is replicated twice) -- The quad counter is bits 3..2 -- The psync flag is bit 4 -- -- At the moment we don't count pixels with the line, the Pi does that signal counter : unsigned(8 downto 0); -- Sample point register; signal sp_reg : std_logic_vector(5 downto 0) := INIT_SAMPLING_POINTS; -- Break out of sp_reg signal offset : unsigned (3 downto 0); signal filter_C : std_logic; signal filter_L : std_logic; -- Sample pixel on next clock; pipelined to reduce the number of product terms signal sample_C : std_logic; signal sample_L : std_logic; -- Decoded RGB signals signal R : std_logic; signal G : std_logic; signal B : std_logic; signal X : std_logic; -- indicates either dark orange or bright orange -- R/PA/PB processing pipeline signal AL1 : std_logic; signal AH1 : std_logic; signal BL1 : std_logic; signal BH1 : std_logic; signal LL1 : std_logic; signal LH1 : std_logic; signal AL2 : std_logic; signal AH2 : std_logic; signal BL2 : std_logic; signal BH2 : std_logic; signal LL2 : std_logic; signal LH2 : std_logic; signal AL3 : std_logic; signal AH3 : std_logic; signal BL3 : std_logic; signal BH3 : std_logic; signal LL3 : std_logic; signal LH3 : std_logic; signal AL : std_logic; signal AH : std_logic; signal BL : std_logic; signal BH : std_logic; signal LL : std_logic; signal LH : std_logic; signal HS1 : std_logic; signal HS2 : std_logic; signal FS1 : std_logic; function map_to_sixbit_pixel (i : std_logic_vector(3 downto 0)) return std_logic_vector is variable temp : std_logic_vector(5 downto 0); begin case i is when "0000" => temp := "000000"; when "0001" => temp := "000001"; when "0010" => temp := "000010"; when "0011" => temp := "000011"; when "0100" => temp := "000100"; when "0101" => temp := "000101"; when "0110" => temp := "000110"; when "0111" => temp := "000111"; when "1000" => temp := "001011"; when "1001" => temp := "010011"; when "1010" => temp := "001000"; when "1011" => temp := "010000"; when others => temp := "000000"; end case; return temp; end function; begin offset <= unsigned(sp_reg(3 downto 0)); filter_C <= sp_reg(4); filter_L <= sp_reg(5); -- Shift the bits in LSB first process(sp_clk) begin if rising_edge(sp_clk) then if sp_clken = '1' then sp_reg <= sp_data & sp_reg(sp_reg'left downto sp_reg'right + 1); end if; end if; end process; process(clk) begin if rising_edge(clk) then -- synchronize CSYNC to the sampling clock HS1 <= HS_I; HS2 <= HS1; -- Counter is used to find sampling point for first pixel if HS2 = '0' and HS1 = '1' then counter <= default_offset; elsif counter(counter'left) = '1' then counter <= counter + 1; else counter(5 downto 0) <= counter(5 downto 0) + 1; end if; -- sample luminance signal if counter(2 downto 0) = (not offset(2)) & offset(1 downto 0) then sample_L <= '1'; else sample_L <= '0'; end if; -- sample colour signal if counter(3 downto 0) = offset then sample_C <= '1'; else sample_C <= '0'; end if; -- Atom pixel processing AL1 <= AL_I; AH1 <= AH_I; BL1 <= BL_I; BH1 <= BH_I; AL2 <= AL1; AH2 <= AH1; BL2 <= BL1; BH2 <= BH1; AL3 <= AL2; AH3 <= AH2; BL3 <= BL2; BH3 <= BH2; LL1 <= L_I; LL2 <= LL1; LL3 <= LL2; LH1 <= SYNC_I; LH2 <= LH1; LH3 <= LH2; if sample_C = '1' then if filter_C = '1' then AL <= (AL1 AND AL2) OR (AL1 AND AL3) OR (AL2 AND AL3); AH <= (AH1 AND AH2) OR (AH1 AND AH3) OR (AH2 AND AH3); BL <= (BL1 AND BL2) OR (BL1 AND BL3) OR (BL2 AND BL3); BH <= (BH1 AND BH2) OR (BH1 AND BH3) OR (BH2 AND BH3); else AL <= AL2; AH <= AH2; BL <= BL2; BH <= BH2; end if; end if; if sample_L = '1' then if filter_L = '1' then LL <= (LL1 AND LL2) OR (LL1 AND LL3) OR (LL2 AND LL3); LH <= (LH1 AND LH2) OR (LH1 AND LH3) OR (LH2 AND LH3); else LL <= LL2; LH <= LH2; end if; end if; -- YUV to RGB if sample_L = '1' then -- AL AH BL BH LL LH X B G R --YELLOW WH 1.5 1.0 0 0 1 0 X X 0 0 1 1 --RED WL 2.0 1.5 0 1 0 0 X X 0 0 0 1 --MAGENTA WM 2.0 2.0 0 1 0 1 X X 0 1 0 1 --BUFF WH 1.5 1.5 0 0 0 0 1 X 0 1 1 1 --BRIGHT ORANGE WH 2.0 1.0 0 1 1 0 X 1 1 0 0 1 --DARK ORANGE BL 2.0 1.0 0 1 1 0 0 X 1 0 1 1 R <= (NOT AL AND NOT AH AND BL AND NOT BH) OR (NOT AL AND AH AND NOT BL AND NOT BH) OR (NOT AL AND AH AND NOT BL AND BH) OR (NOT AL AND NOT AH AND NOT BL AND NOT BH AND LL) OR (NOT AL AND AH AND BL AND NOT BH AND LH) OR (NOT AL AND AH AND BL AND NOT BH AND LH) OR (NOT AL AND AH AND BL AND NOT BH AND NOT LL); -- AL AH BL BH LL LH X B G R --YELLOW WM 1.5 1.0 0 0 1 0 X X 0 0 1 1 --CYAN WM 1.0 1.5 1 0 0 0 X X 0 1 1 0 --GREEN WM 1.0 1.0 1 0 1 0 1 X 0 0 1 0 --DARK GREEN BL 1.0 1.0 1 0 1 0 0 X 1 0 1 0 --BUFF WM 1.5 1.5 0 0 0 0 1 X 0 1 1 1 --DARK ORANGE BL 2.0 1.0 0 1 1 0 0 X 1 0 1 1 G <= (NOT AL AND NOT AH AND BL AND NOT BH) OR (AL AND NOT AH AND NOT BL AND NOT BH) OR (AL AND NOT AH AND BL AND NOT BH) OR (NOT AL AND NOT AH AND NOT BL AND NOT BH AND LL) OR (NOT AL AND AH AND BL AND NOT BH AND NOT LL); -- AL AH BL BH LL LH X B G R --BLUE WL 1.5 2.0 0 0 0 1 X X 0 1 0 0 --CYAN WM 1.0 1.5 1 0 0 0 X X 0 1 1 0 --MAGENTA WM 2.0 2.0 0 1 0 1 X X 0 1 0 1 --BUFF WM 1.5 1.5 0 0 0 0 1 X 0 1 1 1 B <= (NOT AL AND NOT AH AND NOT BL AND BH) OR (AL AND NOT AH AND NOT BL AND NOT BH) OR (NOT AL AND AH AND NOT BL AND BH) OR (NOT AL AND NOT AH AND NOT BL AND NOT BH AND LL); -- AL AH BL BH LL LH X B G R --NORMAL ORANGE WM 2.0 1.0 0 1 1 0 1 0 1 0 0 0 --BRIGHT ORANGE WH 2.0 1.0 0 1 1 0 1 1 1 0 0 1 --DARK GREEN BL 1.0 1.0 1 0 1 0 0 X 1 0 1 0 --DARK ORANGE BL 2.0 1.0 0 1 1 0 0 X 1 0 1 1 X <= (NOT AL AND AH AND BL AND NOT BH) OR (AL AND NOT AH AND BL AND NOT BH AND NOT LL); end if; if sample_L = '1' and counter(counter'left) = '0' then -- R Sample/shift register shift_R <= R & shift_R(1); -- G Sample/shift register shift_G <= G & shift_G(1); -- B Sample/shift register shift_B <= B & shift_B(1); -- X Sample/shift register shift_X <= X & shift_X(1); end if; -- Output quad register if version = '0' then quad <= VERSION_NUM; psync <= '0'; elsif counter(counter'left) = '0' then if counter(3 downto 0) = "0000" then quad(11 downto 6) <= map_to_sixbit_pixel(shift_X(1) & shift_B(1) & shift_G(1) & shift_R(1)); quad( 5 downto 0) <= map_to_sixbit_pixel(shift_X(0) & shift_B(0) & shift_G(0) & shift_R(0)); end if; if counter(3 downto 0) = "0010" then psync <= counter(4); end if; else quad <= (others => '0'); psync <= '0'; end if; -- generate the clamp output if counter >= atom_clamp_start AND counter < atom_clamp_end then clamp <= '1'; else clamp <= '0'; end if; -- generate the csync output if HS2 = '0' and HS1 = '1' then FS1 <= FS_I; end if; if HS2 = '1' and HS1 = '0' then csync <= '0'; elsif HS2 = '0' and HS1 = '1' and not (FS1 = '0' and FS_I = '1') then csync <= '1'; end if; end if; end process; end Behavorial;