kopia lustrzana https://github.com/Wren6991/PicoDVI
Quick port of the spitft2hdmi code into Arduino
Phillip Burgess
rodzic
9d0e8acc40
commit
dad3d14664
|
|
@ -2,7 +2,81 @@
|
||||||
// over 4-wire SPI interface, mimicking functionality of displays such as
|
// over 4-wire SPI interface, mimicking functionality of displays such as
|
||||||
// ILI9341, but shown on monitor instead.
|
// ILI9341, but shown on monitor instead.
|
||||||
|
|
||||||
// THIS IS A PLACEHOLDER AND NOT ACTUALLY WRITTEN YET.
|
// Quick-n-dirty port without regard to screen size and stuff, and
|
||||||
|
// some pins are hardcoded and stuff. Just proof-of-concept stuff,
|
||||||
|
// getting the Pico SDK version of this code adapted to Arduino and
|
||||||
|
// the PicoDVI library.
|
||||||
|
|
||||||
|
// Output of pioasm ----
|
||||||
|
|
||||||
|
#define fourwire_wrap_target 2
|
||||||
|
#define fourwire_wrap 5
|
||||||
|
|
||||||
|
static const uint16_t fourwire_program_instructions[] = {
|
||||||
|
0xa0c3, // 0: mov isr, null
|
||||||
|
0x0005, // 1: jmp 5
|
||||||
|
// .wrap_target
|
||||||
|
0x2022, // 2: wait 0 pin, 2
|
||||||
|
0x20a2, // 3: wait 1 pin, 2
|
||||||
|
0x4002, // 4: in pins, 2
|
||||||
|
0x00c0, // 5: jmp pin, 0
|
||||||
|
// .wrap
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pio_program fourwire_program = {
|
||||||
|
.instructions = fourwire_program_instructions,
|
||||||
|
.length = 6,
|
||||||
|
.origin = -1,
|
||||||
|
};
|
||||||
|
|
||||||
|
static inline pio_sm_config fourwire_program_get_default_config(uint offset) {
|
||||||
|
pio_sm_config c = pio_get_default_sm_config();
|
||||||
|
sm_config_set_wrap(&c, offset + fourwire_wrap_target, offset + fourwire_wrap);
|
||||||
|
return c;
|
||||||
|
}
|
||||||
|
|
||||||
|
// end pioasm output ----
|
||||||
|
|
||||||
|
PIO pio = pio1;
|
||||||
|
|
||||||
|
#define BIT_DEPOSIT(b, i) ((b) ? (1<<(i)) : 0)
|
||||||
|
#define BIT_EXTRACT(b, i) (((b) >> (i)) & 1)
|
||||||
|
#define BIT_MOVE(b, src, dest) BIT_DEPOSIT(BIT_EXTRACT(b, src), dest)
|
||||||
|
#define ENCODED_COMMAND(x) ( \
|
||||||
|
(BIT_MOVE(x, 0, 0)) | \
|
||||||
|
(BIT_MOVE(x, 1, 2)) | \
|
||||||
|
(BIT_MOVE(x, 2, 4)) | \
|
||||||
|
(BIT_MOVE(x, 3, 6)) | \
|
||||||
|
(BIT_MOVE(x, 4, 8)) | \
|
||||||
|
(BIT_MOVE(x, 5, 10)) | \
|
||||||
|
(BIT_MOVE(x, 6, 12)) | \
|
||||||
|
(BIT_MOVE(x, 7, 14)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
uint8_t decode[256];
|
||||||
|
|
||||||
|
struct {
|
||||||
|
uint8_t x0h, x0l, x1h, x1l, y0h, y0l, y1h, y1l;
|
||||||
|
} bounds;
|
||||||
|
|
||||||
|
#define COMMAND_CASET (0x2a)
|
||||||
|
#define COMMAND_PASET (0x2b)
|
||||||
|
#define COMMAND_RAMWR (0x2c)
|
||||||
|
|
||||||
|
static int clamped(int x, int lo, int hi) {
|
||||||
|
if(x < lo) { return lo; }
|
||||||
|
if(x > hi) { return hi; }
|
||||||
|
return x;
|
||||||
|
}
|
||||||
|
|
||||||
|
#define GET_WORD() (word = pio_sm_get_blocking(pio, sm))
|
||||||
|
#define GET_DATA() do { GET_WORD(); if(IS_COMMAND()) goto next_command; } while(0)
|
||||||
|
#define IS_COMMAND() (!(word & 0x2))
|
||||||
|
#define DECODED() (decode[(word & 0x55) | ((word >> 7) & 0xaa)])
|
||||||
|
|
||||||
|
uint16_t *framebuf;
|
||||||
|
uint sm;
|
||||||
|
|
||||||
|
|
||||||
#include <PicoDVI.h> // Core display & graphics library
|
#include <PicoDVI.h> // Core display & graphics library
|
||||||
|
|
||||||
|
|
@ -18,7 +92,193 @@ void setup() {
|
||||||
pinMode(LED_BUILTIN, OUTPUT);
|
pinMode(LED_BUILTIN, OUTPUT);
|
||||||
for (;;) digitalWrite(LED_BUILTIN, (millis() / 500) & 1);
|
for (;;) digitalWrite(LED_BUILTIN, (millis() / 500) & 1);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
framebuf = display.getBuffer();
|
||||||
|
|
||||||
|
for(int i=0; i<256; i++) {
|
||||||
|
int j = (BIT_MOVE(i, 0, 0)) |
|
||||||
|
(BIT_MOVE(i, 2, 1)) |
|
||||||
|
(BIT_MOVE(i, 4, 2)) |
|
||||||
|
(BIT_MOVE(i, 6, 3)) |
|
||||||
|
(BIT_MOVE(i, 1, 4)) |
|
||||||
|
(BIT_MOVE(i, 3, 5)) |
|
||||||
|
(BIT_MOVE(i, 5, 6)) |
|
||||||
|
(BIT_MOVE(i, 7, 7));
|
||||||
|
decode[i] = j;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint offset = pio_add_program(pio, &fourwire_program);
|
||||||
|
sm = pio_claim_unused_sm(pio, true);
|
||||||
|
|
||||||
|
uint pin = 18;
|
||||||
|
uint jmp_pin = 21;
|
||||||
|
|
||||||
|
pio_sm_config c = fourwire_program_get_default_config(offset);
|
||||||
|
|
||||||
|
// Set the IN base pin to the provided `pin` parameter. This is the data
|
||||||
|
// pin, and the next-numbered GPIO is used as the clock pin.
|
||||||
|
sm_config_set_in_pins(&c, pin);
|
||||||
|
sm_config_set_jmp_pin(&c, jmp_pin);
|
||||||
|
// Set the pin directions to input at the PIO
|
||||||
|
pio_sm_set_consecutive_pindirs(pio, sm, pin, 3, false);
|
||||||
|
pio_sm_set_consecutive_pindirs(pio, sm, 1, 1, false);
|
||||||
|
pio_sm_set_consecutive_pindirs(pio, sm, jmp_pin, 1, false);
|
||||||
|
// Connect these GPIOs to this PIO block
|
||||||
|
pio_gpio_init(pio, pin);
|
||||||
|
pio_gpio_init(pio, pin + 1);
|
||||||
|
pio_gpio_init(pio, pin + 2);
|
||||||
|
pio_gpio_init(pio, jmp_pin);
|
||||||
|
// set pulls
|
||||||
|
gpio_set_pulls(pin, true, false);
|
||||||
|
gpio_set_pulls(pin + 1, true, false);
|
||||||
|
gpio_set_pulls(pin + 2, true, false);
|
||||||
|
gpio_set_pulls(jmp_pin, true, false);
|
||||||
|
|
||||||
|
// Shifting to left matches the customary MSB-first ordering of SPI.
|
||||||
|
sm_config_set_in_shift(
|
||||||
|
&c,
|
||||||
|
false, // Shift-to-right = false (i.e. shift to left)
|
||||||
|
true, // Autopush enabled
|
||||||
|
16 // Autopush threshold
|
||||||
|
);
|
||||||
|
|
||||||
|
// We only receive, so disable the TX FIFO to make the RX FIFO deeper.
|
||||||
|
sm_config_set_fifo_join(&c, PIO_FIFO_JOIN_RX);
|
||||||
|
|
||||||
|
// Load our configuration, and start the program from the beginning
|
||||||
|
pio_sm_init(pio, sm, offset, &c);
|
||||||
|
pio_sm_set_enabled(pio, sm, true);
|
||||||
}
|
}
|
||||||
|
|
||||||
void loop() {
|
void loop() {
|
||||||
|
uint16_t word = 0;
|
||||||
|
|
||||||
|
int x=0, y=0;
|
||||||
|
while(true) {
|
||||||
|
GET_WORD();
|
||||||
|
next_command:
|
||||||
|
switch(word) {
|
||||||
|
case ENCODED_COMMAND(COMMAND_CASET):
|
||||||
|
GET_DATA();
|
||||||
|
bounds.x0h = DECODED();
|
||||||
|
|
||||||
|
GET_DATA();
|
||||||
|
bounds.x0l = DECODED();
|
||||||
|
|
||||||
|
GET_DATA();
|
||||||
|
bounds.x1h = DECODED();
|
||||||
|
|
||||||
|
GET_DATA();
|
||||||
|
bounds.x1l = DECODED();
|
||||||
|
break;
|
||||||
|
|
||||||
|
case ENCODED_COMMAND(COMMAND_PASET):
|
||||||
|
GET_DATA();
|
||||||
|
bounds.y0h = DECODED();
|
||||||
|
|
||||||
|
GET_DATA();
|
||||||
|
bounds.y0l = DECODED();
|
||||||
|
|
||||||
|
GET_DATA();
|
||||||
|
bounds.y1h = DECODED();
|
||||||
|
|
||||||
|
GET_DATA();
|
||||||
|
bounds.y1l = DECODED();
|
||||||
|
break;
|
||||||
|
|
||||||
|
case ENCODED_COMMAND(COMMAND_RAMWR):
|
||||||
|
{
|
||||||
|
int X0 = bounds.x0l | (bounds.x0h << 8);
|
||||||
|
X0 = clamped(X0, 0, display.width());
|
||||||
|
int X1 = bounds.x1l | (bounds.x1h << 8);
|
||||||
|
X1 = clamped(X1, X0, display.width()) + 1;
|
||||||
|
|
||||||
|
int Y0 = bounds.y0l | (bounds.y0h << 8);
|
||||||
|
Y0 = clamped(Y0, 0, display.height());
|
||||||
|
int Y1 = bounds.y1l | (bounds.y1h << 8);
|
||||||
|
Y1 = clamped(Y1, Y0, display.height()) + 1;
|
||||||
|
while(1) {
|
||||||
|
for(y=Y0; y<Y1; y++) {
|
||||||
|
for(x=X0; x<X1; x++) {
|
||||||
|
GET_DATA();
|
||||||
|
uint16_t pixel = DECODED() << 8;
|
||||||
|
GET_DATA();
|
||||||
|
pixel |= DECODED();
|
||||||
|
framebuf[x + y * display.width()] = pixel;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
|
||||||
|
// Orig code:
|
||||||
|
|
||||||
|
.program fourwire
|
||||||
|
; Sample bits using an external clock, and push groups of bits into the RX FIFO.
|
||||||
|
; - IN pin 0 is the data pin (GPIO18)
|
||||||
|
; - IN pin 1 is the dc pin (GPIO19)
|
||||||
|
; - IN pin 2 is the clock pin (GPIO20)
|
||||||
|
; - JMP pin is the chip select (GPIO21)
|
||||||
|
; - Autopush is enabled, threshold 8
|
||||||
|
;
|
||||||
|
; This program waits for chip select to be asserted (low) before it begins
|
||||||
|
; clocking in data. Whilst chip select is low, data is clocked continuously. If
|
||||||
|
; chip select is deasserted part way through a data byte, the partial data is
|
||||||
|
; discarded. This makes use of the fact a mov to isr clears the input shift
|
||||||
|
; counter.
|
||||||
|
flush:
|
||||||
|
mov isr, null ; Clear ISR and input shift counter
|
||||||
|
jmp check_chip_select ; Poll chip select again
|
||||||
|
.wrap_target
|
||||||
|
do_bit:
|
||||||
|
wait 0 pin 2 ; Detect rising edge and sample input data
|
||||||
|
wait 1 pin 2 ; (autopush takes care of moving each complete
|
||||||
|
in pins, 2 ; data word to the FIFO)
|
||||||
|
check_chip_select:
|
||||||
|
jmp pin, flush ; Bail out if we see chip select high
|
||||||
|
.wrap
|
||||||
|
|
||||||
|
% c-sdk {
|
||||||
|
static inline void fourwire_program_init(PIO pio, uint sm, uint offset, uint pin, uint jmp_pin) {
|
||||||
|
pio_sm_config c = fourwire_program_get_default_config(offset);
|
||||||
|
|
||||||
|
// Set the IN base pin to the provided `pin` parameter. This is the data
|
||||||
|
// pin, and the next-numbered GPIO is used as the clock pin.
|
||||||
|
sm_config_set_in_pins(&c, pin);
|
||||||
|
sm_config_set_jmp_pin(&c, jmp_pin);
|
||||||
|
// Set the pin directions to input at the PIO
|
||||||
|
pio_sm_set_consecutive_pindirs(pio, sm, pin, 3, false);
|
||||||
|
pio_sm_set_consecutive_pindirs(pio, sm, 1, 1, false);
|
||||||
|
pio_sm_set_consecutive_pindirs(pio, sm, jmp_pin, 1, false);
|
||||||
|
// Connect these GPIOs to this PIO block
|
||||||
|
pio_gpio_init(pio, pin);
|
||||||
|
pio_gpio_init(pio, pin + 1);
|
||||||
|
pio_gpio_init(pio, pin + 2);
|
||||||
|
pio_gpio_init(pio, jmp_pin);
|
||||||
|
// set pulls
|
||||||
|
gpio_set_pulls(pin, true, false);
|
||||||
|
gpio_set_pulls(pin + 1, true, false);
|
||||||
|
gpio_set_pulls(pin + 2, true, false);
|
||||||
|
gpio_set_pulls(jmp_pin, true, false);
|
||||||
|
|
||||||
|
// Shifting to left matches the customary MSB-first ordering of SPI.
|
||||||
|
sm_config_set_in_shift(
|
||||||
|
&c,
|
||||||
|
false, // Shift-to-right = false (i.e. shift to left)
|
||||||
|
true, // Autopush enabled
|
||||||
|
16 // Autopush threshold
|
||||||
|
);
|
||||||
|
|
||||||
|
// We only receive, so disable the TX FIFO to make the RX FIFO deeper.
|
||||||
|
sm_config_set_fifo_join(&c, PIO_FIFO_JOIN_RX);
|
||||||
|
|
||||||
|
// Load our configuration, and start the program from the beginning
|
||||||
|
pio_sm_init(pio, sm, offset, &c);
|
||||||
|
pio_sm_set_enabled(pio, sm, true);
|
||||||
|
}
|
||||||
|
%}
|
||||||
|
#endif
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
.program fourwire
|
||||||
|
; Sample bits using an external clock, and push groups of bits into the RX FIFO.
|
||||||
|
; - IN pin 0 is the data pin (GPIO18)
|
||||||
|
; - IN pin 1 is the dc pin (GPIO19)
|
||||||
|
; - IN pin 2 is the clock pin (GPIO20)
|
||||||
|
; - JMP pin is the chip select (GPIO21)
|
||||||
|
; - Autopush is enabled, threshold 8
|
||||||
|
;
|
||||||
|
; This program waits for chip select to be asserted (low) before it begins
|
||||||
|
; clocking in data. Whilst chip select is low, data is clocked continuously. If
|
||||||
|
; chip select is deasserted part way through a data byte, the partial data is
|
||||||
|
; discarded. This makes use of the fact a mov to isr clears the input shift
|
||||||
|
; counter.
|
||||||
|
flush:
|
||||||
|
mov isr, null ; Clear ISR and input shift counter
|
||||||
|
jmp check_chip_select ; Poll chip select again
|
||||||
|
.wrap_target
|
||||||
|
do_bit:
|
||||||
|
wait 0 pin 2 ; Detect rising edge and sample input data
|
||||||
|
wait 1 pin 2 ; (autopush takes care of moving each complete
|
||||||
|
in pins, 2 ; data word to the FIFO)
|
||||||
|
check_chip_select:
|
||||||
|
jmp pin, flush ; Bail out if we see chip select high
|
||||||
|
.wrap
|
||||||
Ładowanie…
Reference in New Issue