kopia lustrzana https://github.com/OpenRTX/OpenRTX
ttwrplus: add RGB LED support
Implemented WS2812C support with Zephyr driver. Hooked up the RGB control to the existing RED and GREEN LED support. TG-553pull/193/head
rodzic
c60f580396
commit
4df315473f
|
@ -55,7 +55,7 @@ static void gpio_keys_cb_handler(struct input_event *evt)
|
|||
keys &= ~keyCode;
|
||||
}
|
||||
|
||||
INPUT_LISTENER_CB_DEFINE(buttons_dev, gpio_keys_cb_handler);
|
||||
INPUT_CALLBACK_DEFINE(buttons_dev, gpio_keys_cb_handler);
|
||||
|
||||
|
||||
void kbd_init()
|
||||
|
|
|
@ -24,13 +24,14 @@
|
|||
#include <zephyr/drivers/gpio.h>
|
||||
#include <zephyr/drivers/sensor.h>
|
||||
#include <zephyr/drivers/uart.h>
|
||||
#include <zephyr/drivers/led_strip.h>
|
||||
#include "pmu.h"
|
||||
|
||||
#define BUTTON_PTT_NODE DT_NODELABEL(button_ptt)
|
||||
|
||||
static const struct gpio_dt_spec button_ptt = GPIO_DT_SPEC_GET_OR(BUTTON_PTT_NODE, gpios, {0});
|
||||
static const struct device *const qdec_dev = DEVICE_DT_GET(DT_ALIAS(qdec0));
|
||||
|
||||
static const struct device *const led_dev = DEVICE_DT_GET(DT_ALIAS(led0));
|
||||
|
||||
static const hwInfo_t hwInfo =
|
||||
{
|
||||
|
@ -42,6 +43,10 @@ static const hwInfo_t hwInfo =
|
|||
.uhf_minFreq = 440,
|
||||
};
|
||||
|
||||
// RGB led color data
|
||||
static struct led_rgb led_color = {0};
|
||||
|
||||
|
||||
void platform_init()
|
||||
{
|
||||
// Setup GPIO for PTT and rotary encoder
|
||||
|
@ -61,6 +66,14 @@ void platform_init()
|
|||
|
||||
// Initialize PMU
|
||||
pmu_init();
|
||||
|
||||
// Initialize LED
|
||||
if (device_is_ready(led_dev) == false)
|
||||
printk("LED device %s is not ready", led_dev->name);
|
||||
|
||||
ret = led_strip_update_rgb(led_dev, &led_color, 1);
|
||||
if (ret)
|
||||
printk("couldn't update strip: %d", ret);
|
||||
}
|
||||
|
||||
void platform_terminate()
|
||||
|
@ -116,12 +129,44 @@ bool platform_pwrButtonStatus()
|
|||
|
||||
void platform_ledOn(led_t led)
|
||||
{
|
||||
(void) led;
|
||||
int ret = 0;
|
||||
|
||||
switch(led)
|
||||
{
|
||||
case GREEN:
|
||||
led_color.g = 0xff;
|
||||
break;
|
||||
case RED:
|
||||
led_color.r = 0xff;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
ret = led_strip_update_rgb(led_dev, &led_color, 1);
|
||||
if (ret)
|
||||
printk("couldn't update strip: %d", ret);
|
||||
}
|
||||
|
||||
void platform_ledOff(led_t led)
|
||||
{
|
||||
(void) led;
|
||||
int ret = 0;
|
||||
|
||||
switch(led)
|
||||
{
|
||||
case GREEN:
|
||||
led_color.g = 0x00;
|
||||
break;
|
||||
case RED:
|
||||
led_color.r = 0x00;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
ret = led_strip_update_rgb(led_dev, &led_color, 1);
|
||||
if (ret)
|
||||
printk("couldn't update strip: %d", ret);
|
||||
}
|
||||
|
||||
void platform_beepStart(uint16_t freq)
|
||||
|
|
|
@ -11,26 +11,27 @@
|
|||
#include <zephyr/dt-bindings/led/led.h>
|
||||
|
||||
/ {
|
||||
model = "ttwrplus";
|
||||
compatible = "espressif,esp32s3";
|
||||
model = "ttwrplus";
|
||||
compatible = "espressif,esp32s3";
|
||||
|
||||
aliases {
|
||||
i2c-0 = &i2c0;
|
||||
watchdog0 = &wdt0;
|
||||
radio = &uart0;
|
||||
aliases {
|
||||
i2c-0 = &i2c0;
|
||||
watchdog0 = &wdt0;
|
||||
radio = &uart0;
|
||||
radio-pwr = &radio_pwr;
|
||||
radio-pdn = &radio_pdn;
|
||||
radio-ptt = &radio_ptt;
|
||||
qdec0 = &pcnt;
|
||||
};
|
||||
qdec0 = &pcnt;
|
||||
led0 = &ws2812c;
|
||||
};
|
||||
|
||||
chosen {
|
||||
zephyr,sram = &sram0;
|
||||
zephyr,console = &usb_serial;
|
||||
zephyr,shell-uart = &usb_serial;
|
||||
zephyr,flash = &flash0;
|
||||
zephyr,display = &ssd1306;
|
||||
};
|
||||
chosen {
|
||||
zephyr,sram = &sram0;
|
||||
zephyr,console = &usb_serial;
|
||||
zephyr,shell-uart = &usb_serial;
|
||||
zephyr,flash = &flash0;
|
||||
zephyr,display = &ssd1306;
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
|
@ -51,55 +52,55 @@
|
|||
};
|
||||
};
|
||||
|
||||
buttons: buttons {
|
||||
compatible = "zephyr,gpio-keys";
|
||||
buttons: buttons {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button_boot: button_0 {
|
||||
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
|
||||
zephyr,code = <INPUT_KEY_VOLUMEDOWN>;
|
||||
label = "BOOT Button";
|
||||
};
|
||||
button_boot: button_0 {
|
||||
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
|
||||
zephyr,code = <INPUT_KEY_VOLUMEDOWN>;
|
||||
label = "BOOT Button";
|
||||
};
|
||||
|
||||
button_user: button_1 {
|
||||
gpios = <&gpio0 21 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
|
||||
zephyr,code = <INPUT_BTN_START>;
|
||||
label = "Encoder Button";
|
||||
};
|
||||
button_user: button_1 {
|
||||
gpios = <&gpio0 21 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
|
||||
zephyr,code = <INPUT_BTN_START>;
|
||||
label = "Encoder Button";
|
||||
};
|
||||
|
||||
button_ptt: button_2 {
|
||||
gpios = <&gpio0 3 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
|
||||
zephyr,code = <INPUT_BTN_SELECT>;
|
||||
label = "PTT Button";
|
||||
};
|
||||
button_ptt: button_2 {
|
||||
gpios = <&gpio0 3 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
|
||||
zephyr,code = <INPUT_BTN_SELECT>;
|
||||
label = "PTT Button";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
clock-frequency = <ESP32_CLK_CPU_240M>;
|
||||
clock-frequency = <ESP32_CLK_CPU_240M>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
clock-frequency = <ESP32_CLK_CPU_240M>;
|
||||
clock-frequency = <ESP32_CLK_CPU_240M>;
|
||||
};
|
||||
|
||||
&usb_serial {
|
||||
status = "okay";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
current-speed = <9600>;
|
||||
pinctrl-0 = <&uart0_default>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
current-speed = <9600>;
|
||||
pinctrl-0 = <&uart0_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
clock-frequency = <I2C_BITRATE_FAST>;
|
||||
pinctrl-0 = <&i2c0_default>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
clock-frequency = <I2C_BITRATE_FAST>;
|
||||
pinctrl-0 = <&i2c0_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
ssd1306: ssd1306@3c {
|
||||
ssd1306: ssd1306@3c {
|
||||
compatible = "solomon,ssd1306fb";
|
||||
reg = <0x3c>;
|
||||
|
||||
|
@ -117,6 +118,32 @@
|
|||
};
|
||||
};
|
||||
|
||||
&spi3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
line-idle-low; /* Workaround to have low signal for latching */
|
||||
status = "okay";
|
||||
pinctrl-0 = <&spim3_default>;
|
||||
pinctrl-names = "default";
|
||||
ws2812c: ws2812@0 {
|
||||
compatible = "worldsemi,ws2812-spi";
|
||||
|
||||
/* SPI */
|
||||
reg = <0x0>; /* ignored, but necessary for SPI bindings */
|
||||
spi-max-frequency = <6400000>;
|
||||
|
||||
/* WS2812C */
|
||||
chain-length = <1>; /* arbitrary; change at will */
|
||||
spi-cpha;
|
||||
spi-one-frame = <0xf0>; /* 11110000: 625 ns high and 625 ns low */
|
||||
spi-zero-frame = <0xc0>; /* 11000000: 312.5 ns high and 937.5 ns low */
|
||||
color-mapping = <LED_COLOR_ID_GREEN
|
||||
LED_COLOR_ID_RED
|
||||
LED_COLOR_ID_BLUE>;
|
||||
reset-delay = <280>; /* > 280us by WS2812C datasheet */
|
||||
};
|
||||
};
|
||||
|
||||
&pcnt {
|
||||
pinctrl-0 = <&pcnt_default>;
|
||||
pinctrl-names = "default";
|
||||
|
@ -139,50 +166,56 @@
|
|||
};
|
||||
|
||||
&timer0 {
|
||||
status = "disabled";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&timer1 {
|
||||
status = "disabled";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&timer2 {
|
||||
status = "disabled";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&timer3 {
|
||||
status = "disabled";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&wdt0 {
|
||||
status = "okay";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&trng0 {
|
||||
status = "okay";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
uart0_default: uart0_default {
|
||||
group1 {
|
||||
pinmux = <UART0_TX_GPIO39>;
|
||||
output-high;
|
||||
};
|
||||
group2 {
|
||||
pinmux = <UART0_RX_GPIO48>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
uart0_default: uart0_default {
|
||||
group1 {
|
||||
pinmux = <UART0_TX_GPIO39>;
|
||||
output-high;
|
||||
};
|
||||
group2 {
|
||||
pinmux = <UART0_RX_GPIO48>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
i2c0_default: i2c0_default {
|
||||
group1 {
|
||||
pinmux = <I2C0_SDA_GPIO8>,
|
||||
<I2C0_SCL_GPIO9>;
|
||||
bias-pull-up;
|
||||
drive-open-drain;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
i2c0_default: i2c0_default {
|
||||
group1 {
|
||||
pinmux = <I2C0_SDA_GPIO8>,
|
||||
<I2C0_SCL_GPIO9>;
|
||||
bias-pull-up;
|
||||
drive-open-drain;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
spim3_default: spim3_default {
|
||||
group2 {
|
||||
pinmux = <SPIM3_MOSI_GPIO42>;
|
||||
};
|
||||
};
|
||||
|
||||
pcnt_default: pcnt_default {
|
||||
group1 {
|
||||
|
@ -194,40 +227,40 @@
|
|||
};
|
||||
|
||||
&flash0 {
|
||||
status = "okay";
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
status = "okay";
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
/* Reserve 64kB for the bootloader */
|
||||
boot_partition: partition@0 {
|
||||
label = "mcuboot";
|
||||
reg = <0x00000000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
/* Reserve 64kB for the bootloader */
|
||||
boot_partition: partition@0 {
|
||||
label = "mcuboot";
|
||||
reg = <0x00000000 0x00010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* Reserve 1024kB for the application in slot 0 */
|
||||
slot0_partition: partition@10000 {
|
||||
label = "image-0";
|
||||
reg = <0x00010000 0x00100000>;
|
||||
};
|
||||
/* Reserve 1024kB for the application in slot 0 */
|
||||
slot0_partition: partition@10000 {
|
||||
label = "image-0";
|
||||
reg = <0x00010000 0x00100000>;
|
||||
};
|
||||
|
||||
/* Reserve 1024kB for the application in slot 1 */
|
||||
slot1_partition: partition@110000 {
|
||||
label = "image-1";
|
||||
reg = <0x00110000 0x00100000>;
|
||||
};
|
||||
/* Reserve 1024kB for the application in slot 1 */
|
||||
slot1_partition: partition@110000 {
|
||||
label = "image-1";
|
||||
reg = <0x00110000 0x00100000>;
|
||||
};
|
||||
|
||||
/* Reserve 256kB for the scratch partition */
|
||||
scratch_partition: partition@210000 {
|
||||
label = "image-scratch";
|
||||
reg = <0x00210000 0x00040000>;
|
||||
};
|
||||
/* Reserve 256kB for the scratch partition */
|
||||
scratch_partition: partition@210000 {
|
||||
label = "image-scratch";
|
||||
reg = <0x00210000 0x00040000>;
|
||||
};
|
||||
|
||||
storage_partition: partition@250000 {
|
||||
label = "storage";
|
||||
reg = <0x00250000 0x00006000>;
|
||||
};
|
||||
};
|
||||
storage_partition: partition@250000 {
|
||||
label = "storage";
|
||||
reg = <0x00250000 0x00006000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
@ -12,7 +12,12 @@ CONFIG_COMMON_LIBC_MALLOC=y
|
|||
CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE=131072
|
||||
CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE=0
|
||||
CONFIG_INPUT=y
|
||||
CONFIG_INPUT_GPIO_KEYS=y
|
||||
CONFIG_SENSOR=y
|
||||
CONFIG_SERIAL=y
|
||||
CONFIG_UART_INTERRUPT_DRIVEN=y
|
||||
CONFIG_ASSERT=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_LED_STRIP=y
|
||||
CONFIG_WS2812_STRIP=y
|
||||
CONFIG_WS2812_STRIP_SPI=y
|
||||
|
|
Ładowanie…
Reference in New Issue