kopia lustrzana https://github.com/OpenBuilds/OpenBuilds-CONTROL
266 wiersze
24 KiB
Plaintext
266 wiersze
24 KiB
Plaintext
v1.0.372:
|
|
- Updated Max Rate for LEAD1010 Plasma Add On profile
|
|
- Added electron's app.setAppUserModelId(id) to clean up Windows notications (to be tested)
|
|
- Fixed Issue #126 Support Inch measurements in Probe > Endmill Diameter
|
|
- Fixed Issue #306 In grblHAL 4th axes build, let fixGrblHALSettings force $376=1 to designate A axis as Rotary
|
|
- Fixed Issue #335 Keyboard shortcuts - handle Metro naming of keys in Macro's Keyboard Shortcuts
|
|
- Fixed Issue #353 Jog buttons no longer accidentally change override sliders if sliders was in focus
|
|
- (Interface) Fixed Issue #347 Added Interface's Wifi Config to Interface USB Prep Wizard (Requires Interface Firmware update to V1.58 to work)
|
|
- (Interface) Fixed Issue #354 Updated LEAD1010 Plasma Profiles for Interface (Requires Interface Firmware update to V1.58 to work)
|
|
- (Interface) Updated include Interface firmware binary to V1.58 (please flash your Interface from Wizards and Tools > Firmware flashing tool)
|
|
v1.0.371:
|
|
- Fixed Issue #257 Changed Arc drawing behavior for G2 full circles in 3D viewer
|
|
- Fixed Issue #285 Updated ACRO with Pen servo default Grbl profile PWM parameters
|
|
- Fixed Issue #299 Change of settings numbering for grblHAL Station parameters
|
|
- Fixed Issue #308 Improvement: Remember last used COM port
|
|
- Fixed Issue #313 Reworded recovery wizard menu item
|
|
- Fixed Issue #316 UI enhancements
|
|
- Fixed Issue #321 Switched Windows CodeSigning to new EAL4+ / FIPS140-2 compliant workflow
|
|
- Fixed Issue #322 Switched to new Notarizing workflow for MacOS per Apple Technote TN3147
|
|
- Fixed Issue #323 Merged fix for Macro Sorting issue
|
|
- Fixed Issue #325 Added "ok" event for Macros
|
|
- Fixed Issue #327 Show correct fields in Steps per mm Calculator Utility in default state
|
|
- Fixed Issue #328 Improved Flashing Wizard and added warning to backup
|
|
- Fixed Issue #330 Experimental $40=1 in Machine Profiles to see if that resolves Soft Limits issue
|
|
- Fixed Issue #332 Merged fix for Center Probing Offset calculation bug
|
|
- Fixed Issue #336 Merged fix to make Framing pass optional in Surfacing Wizard
|
|
- Fixed Issue #343 Fixed SiLabs USB descriptor
|
|
- Fixed Issue #344 Added Reset prompt to end of Calibration routine
|
|
- Fixed Issue #345 Merged fix for Update Grbl Settings for if settings are changed from macro/terminal/etc
|
|
- Fixed Issue #346 Updated included grblHAL firmware binaries to v20240402 from 20230501
|
|
- Fixed Issue #348 Merged fix for Dark Mode CSS Improvement
|
|
- Fixed Issue #350 Updated local SSL certificates
|
|
- Removed BlackBox X32 advertisement from Splash Screen
|
|
- Changed DROs to use 3 decimal places per grblHAL standards
|
|
- Updated Grbl Settings Descriptions for newer firmware builds
|
|
- Reworded 'firmware not found' error messages to clarify
|
|
- Updated Readme screenshot on Github
|
|
- Updated Firmware Found log strings to show platform and date
|
|
- Added LEAD 1010 Plasma Add-On Machine Profile
|
|
- Fixed bug related to "$$=" commands in Serial Terminal causing issues with Grbl Settings tab
|
|
- Updated Build environment to Node 20
|
|
- Removed IA32 target support for Windows. Building as X64 only
|
|
- Removed broken avrgirl dependency - temporarily removed ability to flash atmega based controllers. Will rewrite with more modern alternative soon
|
|
v1.0.370: Fixed typo in an error message, Updated SSL Certificates
|
|
v1.0.369: Fixed bug in firmware flashing tool
|
|
v1.0.368: Updated grblHAL firmware images to 20230501, updated grblHAL Settings templates, added 3-Axes with Door firmware, Fixed bug in Firmware flashing tool for Interface > Firmware Version when offline, Updated included Interface firmware version
|
|
v1.0.367: Fixed 'indexOf' startup Bug - removed Port Conflict Detection
|
|
v1.0.366: Improved grblHAL integration (Additional Homing Enable Masks)
|
|
v1.0.365: Increased Updater snooze to 8hr interval, Improved port-confict handling, Improved Recovery wizard to deal with Laser files
|
|
v1.0.364: Fixed bug in Surfacing Wizard Freeze bug (Special thanks to Armaliteguy for providing debug info)
|
|
v1.0.363: Renewed SSL certificates for API integration
|
|
v1.0.362: Fixed typo in port left over from earlier test
|
|
v1.0.361: Test older version of Github Actions runner for Ubuntu installs
|
|
v1.0.360: Improved Job Recovery wizard to handle Spindle commands / Warn if no spindle commands found (Thanks to @sharmstr)
|
|
v1.0.357-359: Debugged and fixed the Linux/Mac Modules bug, removed Hazardous from dependencies, Changed internal methods for launching esptool
|
|
v1.0.356: Added right-click Context Menu to Macro Buttons. Moved Delete/Edit to Macros Context Menu. Added Macro Button Sorting to Context Menu. Added Macro Export/Import functionality
|
|
v1.0.355: Updated installer license agreement / terms and conditions, Added Email Registration, Fixed Surfacing Wizard menu bug
|
|
v1.0.354: Fix for double-negative values in Surfacing Wizard
|
|
v1.0.353: Fixed API integration for cam.openbuilds.com
|
|
v1.0.351: Updated defaults for Surfacing Wizard UI, Updated text on Recovery wizard
|
|
v1.0.352: Added support for nodeIntegration (Additional backend support for awesome JS Macros)
|
|
v1.0.350: Updated all dependencies, Updated to Node 18, Removed Drivelist Dependency
|
|
v1.0.349: Added Multipass option to Surfacing Wizard, Experimental Job resume/recovery Wizard (use at own risk)
|
|
v1.0.345-8: Removed Carveco/Fabber links from Open Gcode menu. Fixed bug #292, Updated dark Mode CSS #291, Updated Acro profiles for grblHAL #288, Updated servo support for grblHAL #285, Decreased color shade of button focus box shadow to avoid confusion with distance selector #293, Updated Github Actions scrips
|
|
v1.0.344: Fixed bug in Dark Mode theme with Jog Distance Selected CSS
|
|
v1.0.343: Updated wording on ESP32 based Bootloader error message, Assert G90/G21 for GotoZero commands to fix Issue #286
|
|
v1.0.342: Beta test of Electron 19 based native File Open dialog for issue #270, Basic FluidNC connectivity support, Updated SSL Certificates, Added GPU Information menu entry under Troubleshooting, Fixed bug in Mobile Jog
|
|
v1.0.341: Updated grblHAL firmware images to fix Probe and Y2 Bugs, updated Machine Profiles
|
|
v1.0.340: Fixed bug in X32>4Axes flashing tool
|
|
v1.0.339: Updated grblHAL Binaries to fix Probe bug, Windows Taskbar jog Progress indicator, Updated Pi Install script with Node19x, Added coolant/vacuum to Surfacing Wizard
|
|
v1.0.338: Beta testing alternative GPU blacklist switch config for older computers, Fixed a couple Grbl Settings bugs
|
|
v1.0.337: Improved WebGL Detection
|
|
v1.0.334/5/6: Dark Mode theme (based off /pull/#223), Added Fullscreen Mode button, Updated Dependencies (/pull/260), Fixed bug in ATmega Custom flash option (#268), Updated Wizard's Graphics
|
|
v1.0.333: BlackBox X32 Support, 4th Axis support: A-Axis Jog and DRO, Updated firmware Flashing tool, Updated USB tool for Interface
|
|
v1.0.332: Updated SSL certificates
|
|
v1.0.331: Fixed bug in Firmware flashing tool
|
|
v1.0.330: Fixed bug in Mobile Jog wizard, updated Pi install script
|
|
v1.0.329: Testing version for random start bug
|
|
v1.0.327/8: Updated GHA compile environment dependencies
|
|
v1.0.326: Reverted to classic Grbl Settings layout, added more Grbl settings parameters, fixed bug in Firmware upload tool,
|
|
v1.0.325: Updated Electron-builder backend
|
|
v1.0.324: changed Position Cone to be Always Visible, Added 3D view representation of Machine Coordinate space
|
|
v1.0.323: Fixed Probe abort bug #248, Fixed Sim Cone bug #245, Updated Firmware Flashing tool
|
|
v1.0.322: Telnet support, Re-worded update dialog and added Release statistics
|
|
v1.0.319/320/321: Fix F5 Memory leak bug (public beta), Cleanup old unused libraries from source tree to decrease installer download time and installed disk usage
|
|
v1.0.318: Improvements to Grbl Settings tab (cosmetics and functionality), Improved clearAlarm and Stop backend functionality, Removed Fabber and Carveco adbuttons from main toolbar, Added STL loader for issue #26, Cosmetic improvements and updated graphics for Probe Wizard, Fixed consistent button alignment of modal popups, added Cancel button to Servo calibration wizard, decoupled Probe Jog widget for re-use in other macros, Added Popup warning if job file contains G53 moves but machine has not been homed, Improved Machine Profiles
|
|
v1.0.317: Fix Probe dialog bug introduced in 1.0.316. Please update to 1.0.317 to resolve
|
|
v1.0.316: More work on issue #241 - up for testing
|
|
v1.0.315: Updated drivelist backend dependency, updated Build process to use correct Windows/VS image
|
|
v1.0.314: Updated SSL Certificates, #240 Increased modal data availability for custom macros, Fixed dialog window close bug #228, Fixed alarm dialog bug #241, Fixed Z-index bug #229
|
|
v1.0.313: Added scrollbars to Macro Editor to cater for smaller screens
|
|
v1.0.312: Updated SSL Certificates
|
|
v1.0.311: Fix cosmetics Bug
|
|
v1.0.310: Updated startup message, Updated SSL certificates
|
|
v1.0.309: Fixed WCS report injection bug
|
|
v1.0.308: WCS Display
|
|
v1.0.307: Updated included firmware.bin for Interface update wizard
|
|
v1.0.306: Allow probing in other Coordinate systems as well
|
|
v1.0.305: Update SSL Certificates for OpenBuildsCAM integration
|
|
v1.0.304: Inch mode DRO edit use 3 Decimal places as per #216, Updated SSL Certificates
|
|
v1.0.303: Updated Interface Probe Macros
|
|
v1.0.302: Pi Install Script updated to support 2021-03-04-raspios-buster-armhf
|
|
v1.0.301: Bugfix: DRO Set position for Y/Z (Bug #211), Bugfix: Cleanup lastJobStartTime on cancel (Issue #210), Fixed Door generates feedhold message (Bug #191)
|
|
v1.0.299/300: Updated GitHubActions to only build on tagged releases, Updated Authenticode Certificates, Updated SSL Certificates, Fixed layout of Job Log window, Fixed Mobile Jog Widget bug, Added Jog Rate slider to Mobile Jog, Changed statusbar timer to show DONE:time when job is complete
|
|
v1.0.298: Added Keyboard shortcuts for in/decrease Jog Speed
|
|
v1.0.297: Changed package.json for GitHub Actions / Electron Updater bug
|
|
v1.0.296: Job Time fix, Added Job Log, Removed Job Complete dialog
|
|
v1.0.295: Added Python ESPtool for Mac/Linux Interface Firmware flasher (Install Python, Pip and PySerial first), Fix for Bug #202: DRO Shift+Enter after G20 gcode, Added support for NumpadEnter on DRO, Enhanced Grbl Settings - Limits installed, Switch from Jog Feedrate Input to Jog Percentage Slider, Increase size of 3D viewer, 3D viewer grid now changes with mm-mode and inch-mode tabs
|
|
v1.0.294: MacOS Big Sur support (Signed and Notarized)
|
|
v1.0.293: Enhanced detected of Auto Updates, Fixed the "Visit OpenBuilds" link button
|
|
v1.0.292: Fix for Startup Macros, Added Maximize button, Added ability to set Work Coordinates from DRO (Shift+Enter after entering value on DRO), Darkened Serial Log font colors to improve readability, Larger jog buttons, Cosmetic tweaks
|
|
v1.0.291: Added Carveco and Fabber links, Added duplicate Key checking for Keyboard Shortcuts, Fix for NaN time errors in JobComplete Dialogs, Updated Pi install script, Fix for Jog increments Keyboard shortcuts
|
|
v1.0.290: Windows x32/x64 version
|
|
v1.0.289: Fixed Jog Increments Keyboard Shortcuts
|
|
v1.0.286/7/8: Moved CI to GHActions
|
|
v1.0.285: MacOS ESPtool Support (Beta)
|
|
v1.0.284: Fixed bug related to Door that was affecting Probing
|
|
v1.0.283: Fixed realtime feedrate indicator, improved Door handling
|
|
v1.0.282: Improved logging messages for Interface Firmware flashing tool, Fixed bug with non-standard Grbl Firmwares that have Variable Speed disabled
|
|
v1.0.281: Added "Restore Backup" button for Grbl Settings, Fixed jog increment for mm after switching between in/mm
|
|
v1.0.280: Socket.IO Bug fixed
|
|
v1.0.279: Autorun macros: added error toast to keyboard shortcut, Fixed CSS on Serial Console tab
|
|
v1.0.278: Fixed bug #179 (Electron upload path for Interface Firmware)
|
|
v1.0.277: Fixed Y Calibrations Wizard Y+ button, Updated SSL Certificates, Fixed comments in Surfacing Wizard Gcode, Display output of "?" in log if sent via sendGcode, added 0.001" Incremental Jog , added Realtime feedrate Indicator to Feed Override slider, Support for JS Macros on startup, Updated Socket.IO
|
|
v1.0.276: Focus on OK button on JobComplete dialog, Updated Door handling for UI, Updated DOOR messages in footer
|
|
v1.0.275: Fixed /upload page for large files
|
|
v1.0.274: Interface Firmware v1.43
|
|
v1.0.273: Cleanup of old resources
|
|
v1.0.272: New 3D viewer: Arc Support
|
|
v1.0.271: New 3D viewer: More lightweight, supports larger files, Render Progress percentage, antialiased graphics, opacity, etc; Prevent large files from loading to Gcode Editor, new RunJob method for large files
|
|
v1.0.270: Updated LEAD1515 Profile: Max Travel, Updated Interface Files
|
|
v1.0.269: Added Machine profiles to Interface USB Drive Wizard, renamed menu entry for Keyboard shortcuts editor
|
|
v1.0.268: Fixed cosmetic layout css issue
|
|
v1.0.267: Fixed probe complete dialog, added 1% laser focus power, restore incremental if it was set prior to probe, added 3rd decimal for Inch mode DRO / padding to 2 decimals for mm mode, added Machine Coordinates to DRO tooltip, Handle M0 Pauses (Carbide etc)
|
|
v1.0.266: Updated "error 9" dialog to also include details of earlier ALARMs for troubleshooting, Fixed CheckSize bug with Lightburn Relative Coordinates
|
|
v1.0.265: Added error handling for Grbl connection failures via Interface, Updated Logging UI, Fixed Keyboard Jog bug
|
|
v1.0.264: Interface Serial Integration, Splash Screen Updates, Improved Continuous Jogging, Fixed runaway jogging bug
|
|
v1.0.263: Job complete running time Dialog, sample macros
|
|
v1.0.262: Fixed runaway Jogging bug, Improved Continuous Jogging calculations, Fixed Soft Limits jogging bugs
|
|
v1.0.259-261: added Supporting tools for OpenBuilds Interface
|
|
v1.0.258: Removed placeholders from Surfacing Wizard form
|
|
v1.0.257: Maintenance: Updated SSL Certs for OB CAM integration, Updated to latest build of Font Awesome, New Features: Added keyboard shortcuts for Feed/Speed Overrides #156, Save jog feedrate between sessions #158, Sync error/alarm close event between multiple windows #136, Updated calibration Wizard to support larger moves #154
|
|
v1.0.256: Enhanced Continuous Jog to prevent runaway - should fix #73
|
|
v1.0.255: Fixed a cosmetic typo in Probe wizard, test of Soft Limits calculation Changes
|
|
v1.0.254: Continous Jog - Soft Limit calculation method update
|
|
v1.0.253: Fix 3D Viewer Bug with Fusion outputs #157
|
|
v1.0.252: Fix for hold:0 status on jog with soft-limits
|
|
v1.0.251: Updated LEAD1515 Profile, Improved Stop button, Fixed Custom Z Plate thickness Bug
|
|
v1.0.250: Fix for statusLoop on reconnect
|
|
v1.0.249: Fixed bug related to $32 in machine profiles, Updated LEAD1515 Profile
|
|
v1.0.247/8: Added LEAD1515 Profile
|
|
v1.0.246: Made AutoProbe the default for button on Main Toolbar, cleaned up codebase, minor changes to autoprobe sequence
|
|
v1.0.245: Updates for Pi4 Buster support
|
|
v1.0.244: Fix for Custom XYZ Probe Values bug #144, Remove Install Drivers button (users misunderstood)
|
|
v1.0.243: Fix cosmetic bug: Scrollbar on Probe Dialog
|
|
v1.0.242: Update CI to NodeJS-12
|
|
v1.0.241: Updated Dependencies
|
|
v1.0.240: Updated Certicates
|
|
v1.0.239: Add support for VFD/PWM spindles to Tool On menu, Fixed bug in Surfacing Wizard Issue #139
|
|
v1.0.238: Added Automatic Probing (Find Endmill diameter automatically), Fix cosmetic bug in editing JS Macros. Fixed issues/enhancements #92, #108, #127, #128, #129, #130, #131, #132, #134, #135
|
|
v1.0.236/7: Fixed Pause bug
|
|
v1.0.235: Improved Serial Buffer check
|
|
v1.0.234: Added check for USB Selective Suspend to Troubleshooting tab, improved simulation of arcs, Fixed right-click menu in Gcode Editor
|
|
v1.0.233: Cleanup code
|
|
v1.0.232: Fix bug in Keyboard Jog
|
|
v1.0.231: Fix bug in Keyboard Shortcut editor
|
|
v1.0.230: Updated Macros Editor with support for JS macros, new Icon selector, etc
|
|
v1.0.229: XYZ Probe Routine: Change Z level from absolute to relative, Enable homing button in Alarms state (to allow homing if alarm = position lost), added Backup Grbl Settings button
|
|
v1.0.228: Fixed bug related to Continous Jogging with Soft Limits via the Mobile Jog Widget
|
|
v1.0.227: Fixed behavior of Jog Buttons on TouchScreens
|
|
v1.0.224-226 Minor Bugfixes (keyboard shortcuts, macros related), Updated Mobile Jog to include Continuous Jogging
|
|
v1.0.223: Added keyboard shortcuts to Macros, updated look of buttons to include showing keyboard assignment
|
|
v1.0.222: Added Keyboard shortcuts for GotoZero, and switching between Incremental/Continuous jogging
|
|
v1.0.221: Corrected product names for XYZ Probe Plus
|
|
v1.0.220: New XYZ and Custom Probe wizards, new Probe Button on Main toolbar, fixed File association Opening (Bug #119 ), added loaded Filename to titlebar (Issue #116), changed Keybinding for Devtools to ctrl+shift+i, added shortcut key F6 to jump to console (Issue #112)
|
|
v1.0.216-219: Internal Testing versions only
|
|
v1.0.215: Fixed bug with Z Plate retract where plate is thicker than 10mm
|
|
v1.0.214: Fixed bug with Z-Zero plate probing routine, added Z Plate thickness setting back
|
|
v1.0.213: Updated Authenticode Signing certificate
|
|
v1.0.212: Major updates to dependency versions (SerialPort8, Electron 8)
|
|
v1.0.211: Mobile Jog: added space between jog rose and step size, Update mobile to new Probe wizards, Updates to Mobile Jog Page, Updated SSL Certificates, fixed bug #114 (Tooltip incorrect)
|
|
v1.0.210: Focussed on close button of alarm/error dialogs to ease closing, added Driver Install button for beginners, beta probing wizards (internal testing only)
|
|
v1.0.209: Added Node-Debugger to help check not-responding issue, disabled console.log debugging in server process
|
|
v1.0.208: Removed accidental S-Word from coolant menu commands
|
|
v1.0.207: Added LEAD1010 Laser Profile, fix bug #107 (Disable CheckSize button on PCs that doesn't support WebGL), fix bug with inch-mode Check Size
|
|
v1.0.206: Fixed update check to comply with Github deprecations: https://developer.github.com/changes/2019-11-05-deprecated-passwords-and-authorizations-api/
|
|
v1.0.205: Updated version of avrgirl backend for Firmware flashing, fixes to CI
|
|
v1.0.204: Soft-Limits support in Keyboard Continuous Jogging
|
|
v1.0.203: Fixed bug where update popup appears during continuous Jog, now it waits
|
|
v1.0.202: Soft-Limits support in Continuous Jogging
|
|
v1.0.201: Updated SSL Certificates
|
|
v1.0.200: Fixed naming of Abort Button
|
|
v1.0.199: Improvd handling of Helican G2/G3 preview
|
|
v1.0.198: Fixed bug in Mobile Jog
|
|
v1.0.197: Renewed SSL Certificates
|
|
v1.0.196: Added menu to troubleshooting tab to selectively disable frontend features for debugging
|
|
v1.0.195: Fixed bug related to default state of 3D viewer
|
|
v1.0.194: Added option to disable 3D Viewer for slow machines
|
|
v1.0.193: Improved 3D viewer loading speed
|
|
v1.0.192: Fixed C-Beam Machine profile for new BlackBox wiring video
|
|
v1.0.191: Changed wording of Update window
|
|
v1.0.190: Fixed Sphinx55 and Sphinx1050 profile for new BlackBox wiring video
|
|
v1.0.189: Fixed Workbee1010 and Workbee1050 profile for new BlackBox wiring video
|
|
v1.0.188: Improved 3D Viewer for Inch mode files
|
|
v1.0.187: Fixed Workbee1510 profile for new BlackBox wiring video
|
|
v1.0.186: Fixes for 3D viewer in Inch mode
|
|
v1.0.185: Changed wording on Firmware Detection to avoid confusion
|
|
v1.0.184: Improved unhandled exceptions to hide unimportant errors from users
|
|
v1.0.183: Removed LEAD55 and fixed capitalization of LEAD1010, testing Probing with forced G21 before probe
|
|
v1.0.182: Updated SSL Certificates, Hide Pen Buttons until an instance of Grbl-Servo is detected
|
|
v1.0.181: Fixed bug #88 re Incremental/Continous jog focus, Revamped Grbl Predefined Profiles to use submenus and added Pen options, Integrated Servo Pen Up/Down.
|
|
v1.0.180: Fixed bug #87: Don't show Update dialog while running job, Updated connection messages when Smoothieware is detected to alert user to replace it with Grbl-LPC, Increased spacing between buttons in Mobile interface (bug #90), Added Framing pass to Surfacing Wizard (Bug #83), updated 2x Dependencies
|
|
v1.0.179: New 3D Viewer backend: Support G2/G3 Arcs
|
|
v1.0.178: New 3D Viewer backend with support for Large Gcode Files, massively faster rendering
|
|
v1.0.176/7: Rpi Unofficial Support https://github.com/OpenBuilds/OpenBuilds-CONTROL/wiki/Run-on-a-Raspberry-Pi-(No-Compile-Method)
|
|
v1.0.175: Fixed Accidental keybindings on some more Input fields, improved ERROR and ALARM dialogs
|
|
v1.0.174: Added Inch/MM mode to Mobile Jog
|
|
v1.0.173: Added support (beta) for G2/3 to the Simulator
|
|
v1.0.172: Fix spelling error (US vs UK English)
|
|
v1.0.171: Fix Keyboard-Jog Default Assignment bug
|
|
v1.0.170: MacOS: Fixes: Top Menu, Copy/Paste, Label for Port Name (remove /dev/tty to keep smaller)
|
|
v1.0.169: Added Estimated Time to Serial Log on GCODE Load.
|
|
v1.0.168: Improved Grbl Flashing Tool and Moved to "Wizards and Tools", Improved Inch Mode 3D viewer, fix bug in Continious Jog
|
|
v1.0.167: Improved Memory management for 3D Viewer, Added Inch Mode (Issue#59), Moved Steps/mm Calibration Tools to "Wizards and Tools" menu,
|
|
v1.0.166: Fix for ElectronSecondInstance Behaviour and Updated SSL Certificates
|
|
v1.0.165: Surfacing Wizard
|
|
v1.0.164: Fix for odd JS bug that affected users in v1.0.161 and 10.0.162
|
|
v1.0.163: Move Switch for Incr/Conti Jog, Improvements to GCODE Editor and 3D view
|
|
v1.0.162: Improved .OBC (OpenBuilds CAM) Handling
|
|
v1.0.161: Associate .OBC (OpenBuilds CAM files)
|
|
v1.0.160: Update MiniMill Grbl-defaults Profile to match New Video
|
|
v1.0.159: Added Feedrate/Spindle Override Reset Buttons
|
|
v1.0.158: Improvements to the Mobile Jog UI
|
|
v1.0.157: Fix Bug#66 -Grbl settings invert display: , Fix Bug#68 - Machine Image for Custom, Fix Bug#69 - Keyboard: disable bindings in Macro Inputs, Improvement: Keyboard Binding for UNLOCK will also close Alarm Dialog now.
|
|
v1.0.156: Added Job Time Remaining functionality
|
|
v1.0.155: Added Continuous Jog Functionality (Enable from the Keyboard Shortcuts icon on the top toolbar) (BETA)
|
|
v1.0.154: added Keyboard Shortcuts Frontend
|
|
v1.0.153: Improved UI behavior on unplug all devices, added Keyboard Shortcuts Backend
|
|
v1.0.152: Updated backend to node-serialPort 7.1.3, Updated Backend to Electron 4.0.5.
|
|
v1.0.151: Macros: Added customizable tooltip, Macros: Edit button hover color, Fix UI for USB Unplug while connected.
|
|
v1.0.150: Improvements to the Feedrate Override and Tool/Spindle/Laser Override Sliders
|
|
v1.0.149: Fixed Bugs in Multiline Macros
|
|
v1.0.148: Multi-line Macros, Grbl Flashing tool: BlackBox added, Switch to Serial Console on-connect to help ease troubleshooting.
|
|
v1.0.147: Updated lodash Dependancy, update AVRgirl Dependency, added Xpro support to the Grbl Flashing tools
|
|
v1.0.146: Custom Machine profile, Tooltips for Grbl Settings, Alarm Unlock on Alarm Modal, Added Link to Forum on Troubleshooting tab, minor Cosmetics to 3D Viewer, Probe Macros/Console: Only show dialog when probed from Wizard, normal macro/console probes only log to Serial Console now
|
|
v1.0.145: Updated SSL Certificates
|
|
v1.0.144: Fixed bug related to socket.io Connection
|
|
v1.0.143: Improved stability when XPRO Driverminder is active, and removed extraneous Popup notifications (got annoying on Win10 due to the Notification Center involvement)
|
|
v1.0.142: Fix Bug related to status parser
|
|
v1.0.141: Fix Bug that prevented Jog, fixed bug that disabled homing for Smoothie
|
|
v1.0.140: Fix Jog/Checksize to still move in mm after G20
|
|
v1.0.138: Changed size of MiniMill overlay, made 3D viewer the default tab
|
|
v1.0.137: Added Confirmation Dialogs to the Grbl Settings reset buttons
|
|
v1.0.136: Added Door and Buttons to Troubleshooting, Added G28/G30 handling, Added Custom machine profile, added Machine Overlay in 3D viewer, added Goto OpenBuilds Button
|
|
v1.0.135: Handle XPROv4 DriverMinder/Grbl-feedhold-resume-abort buttons, add G20/G91 to GOTOZERO moves
|
|
v1.0.134: Added mPOS gotozero, and wPOS GotoZero via mPos Z0
|
|
v1.0.133: Fixed MacOS errors, Improved Icons
|
|
v1.0.131: Added Changelog section to Troubleshooting
|
|
v1.0.130: Fixed MacOS Quit Behaviour
|
|
v1.0.129: Enhanced Grbl Settings panel, added Laser specific hello-world
|
|
v1.0.127: Added Steps-per-mm Fine Tuning tool
|
|
v1.0.124: Added Z0 Probing
|
|
v1.0.122: Added Grbl Firmware Flashing utility
|
|
v1.0.119: Improved Tool-On and Tool-Off buttons
|
|
v1.0.117: Added Macros panel
|