Read Settings

app/js/grbl-settings-defaults.js

@@ -827,75 +827,13 @@ function selectMachine(type) {
       // as per https://openbuilds.com/threads/blackbox-x32.19810/page-3#post-131285
       $("#val-44-input").val(3)
       $("#val-45-input").val(0)
-    } else if (customFirmware == "acropen" && laststatus.machine.firmware.platform == "grblHAL") {
-      // as per https://openbuilds.com/threads/blackbox-x32.19810/page-3#post-131285
-      $("#val-44-input").val(3)
-      $("#val-45-input").val(0)
-      $("#val-33-input").val(50) // spindle pwm freq
-      // $33 = 50Hz = 20ms (1/50s) repetion rate, $34-$36 are percentages of this. https://openbuilds.com/threads/blackbox-x32-servo-connection.20395/#post-134896
-      // Set $33=50 (PWM frequency), $34=5, $35=5 and $36=10 to generate a “standard” PWM signal: 20ms repetition rate, 1 - 2ms pulse length range.
-      // You may decrease $34 and $35 to output a shorter pulse than 1ms at min, and increase $36 to get a longer pulse than 2ms at max.
-      $("#val-34-input").val(5) // off value
-      $("#val-35-input").val(5) // min value
-      $("#val-36-input").val(100) // max value
-
-    } else if (customFirmware == "acro" && laststatus.machine.firmware.platform == "grbl") {
-      Metro.dialog.create({
-        title: "Custom Firmware Required",
-        content: `<div>The machine type you selected, needs a custom firmware. Please use the Firmware Flashing Wizard to upload a custom firmware image to the controller to properly support this machine. </div>`,
-        actions: [{
-            caption: "No Thank you",
-            cls: "js-dialog-close",
-            onclick: function() {
-              console.log("Do nothing")
-            }
-          },
-          {
-            caption: "Launch the Flashing Wizard",
-            cls: "js-dialog-close success",
-            onclick: function() {
-              openFlashingTool();
-              setTimeout(function() {
-                // $('#grblAxesCount').data('select').val('2axes')
-              }, 500)
-            }
-          },
-
-        ]
-      });
-
-      console.log('This machine needs a custom firmware')
-    } else if (customFirmware == "acropen" && laststatus.machine.firmware.platform == "grbl") {
-      Metro.dialog.create({
-        title: "Custom Firmware Required",
-        content: `<div>The machine type you selected, needs a custom firmware. Please use the Firmware Flashing Wizard to upload a custom firmware image to the controller to properly support this machine. </div>`,
-        actions: [{
-            caption: "No Thank you",
-            cls: "js-dialog-close",
-            onclick: function() {
-              console.log("Do nothing")
-            }
-          },
-          {
-            caption: "Launch the Flashing Wizard",
-            cls: "js-dialog-close success",
-            onclick: function() {
-              openFlashingTool();
-              setTimeout(function() {
-                //$('#grblAxesCount').data('select').val('servo')
-              }, 500)
-            }
-          },
-
-        ]
-      });
-
-      console.log('This machine needs a custom firmware')
     }
-    //}
-
   }
 
+  // Force Limits on
+  $('#limitsinstalled:checkbox').prop('checked', true);
+
+
   lastSelectedMachine = type;
   sendGcode('$I=' + lastSelectedMachine)
   checkifchanged()

app/js/grbl-settings.js

@@ -375,10 +375,20 @@ function grblPopulate() {
       $('#homeBtn').attr('disabled', true)
     }
 
-    if (grblParams['$33'] == 50 && grblParams['$34'] == 5 && grblParams['$35'] == 5 && grblParams['$36'] == 10) {
+    // if (grblParams['$33'] == 50 && grblParams['$34'] == 5 && grblParams['$35'] == 5 && grblParams['$36'] == 10) {
-      $('#scribeinstalled:checkbox').prop('checked', true);
+    //   setSelectedToolhead('scribe')
-    } else {
+    // }
-      $('#scribeinstalled:checkbox').prop('checked', false);
+
+    if (isMatchingConfig(grblParams, grblParams_scribe)) {
+      setSelectedToolhead('scribe')
+    } else if (isMatchingConfig(grblParams, grblParams_plasma)) {
+      setSelectedToolhead('plasma')
+    } else if (isMatchingConfig(grblParams, grblParams_router)) {
+      setSelectedToolhead('router11')
+    } else if (isMatchingConfig(grblParams, grblParams_laser)) {
+      setSelectedToolhead('laser')
+    } else if (isMatchingConfig(grblParams, grblParams_vfd)) {
+      setSelectedToolhead('vfd_spindle')
     }
 
     setTimeout(function() {
@@ -788,13 +798,14 @@ function enableLimits() {
   // elm.scrollIntoView(true);
 }
 
+var grblParams_scribe = {
+  $33: "50", //PWM Freq for RC Servo
+  $34: "5", //Spindle Off Value for RC Servo
+  $35: "5", //Spinde Min Value for RC Servo
+  $36: "10", //Spindle max Value for RC Servo
+}
+
 function enableScribe() {
-  var grblParams_scribe = {
-    $33: "50", //PWM Freq for RC Servo
-    $34: "5", //Spindle Off Value for RC Servo
-    $35: "5", //Spinde Min Value for RC Servo
-    $36: "10", //Spindle max Value for RC Servo
-  }
   for (var key in grblParams_scribe) {
     if (grblParams_scribe.hasOwnProperty(key)) {
       var j = key.substring(1)
@@ -812,15 +823,17 @@ function enableScribe() {
   // elm.scrollIntoView(true);
 }
 
+var grblParams_laser = {
+  $30: "1000", // S Max
+  $32: "1", // Laser Mode On
+  $33: "1000", //PWM Freq
+  $34: "0", //Spindle Off Value
+  $35: "0", //Spinde Min Value
+  $36: "100", //Spindle max Value
+}
+
 function enableLaser() {
-  var grblParams_laser = {
+
-    $30: "1000", // S Max
-    $32: "1", // Laser Mode On
-    $33: "100", //PWM Freq
-    $34: "0", //Spindle Off Value
-    $35: "0", //Spinde Min Value
-    $36: "100", //Spindle max Value
-  }
   for (var key in grblParams_laser) {
     if (grblParams_laser.hasOwnProperty(key)) {
       var j = key.substring(1)
@@ -838,15 +851,17 @@ function enableLaser() {
   // elm.scrollIntoView(true);
 }
 
+var grblParams_router = {
+  $30: "1000", // S Max
+  $32: "0", // Laser Mode On
+  $33: "5000", //PWM Freq
+  $34: "0", //Spindle Off Value
+  $35: "0", //Spinde Min Value
+  $36: "100", //Spindle max Value
+}
+
 function enableRouter() {
-  var grblParams_router = {
+
-    $30: "1000", // S Max
-    $32: "0", // Laser Mode On
-    $33: "5000", //PWM Freq
-    $34: "0", //Spindle Off Value
-    $35: "0", //Spinde Min Value
-    $36: "100", //Spindle max Value
-  }
   for (var key in grblParams_router) {
     if (grblParams_router.hasOwnProperty(key)) {
       var j = key.substring(1)
@@ -864,21 +879,23 @@ function enableRouter() {
   // elm.scrollIntoView(true);
 }
 
+var grblParams_plasma = {
+  $30: "1000", // S Max
+  $32: "0", // Laser Mode On
+  $33: "1000", //PWM Freq
+  $34: "0", //Spindle Off Value
+  $35: "0", //Spinde Min Value
+  $36: "100", //Spindle max Value
+}
+
 function enablePlasma() {
-  var grblParams_router = {
+
-    $30: "1000", // S Max
+  for (var key in grblParams_plasma) {
-    $32: "0", // Laser Mode On
+    if (grblParams_plasma.hasOwnProperty(key)) {
-    $33: "5000", //PWM Freq
-    $34: "0", //Spindle Off Value
-    $35: "0", //Spinde Min Value
-    $36: "100", //Spindle max Value
-  }
-  for (var key in grblParams_router) {
-    if (grblParams_router.hasOwnProperty(key)) {
       var j = key.substring(1)
       var newVal = $("#val-" + j + "-input").val();
       // console.log("$" + j + " = " + newVal)
-      $("#val-" + j + "-input").val(parseFloat(grblParams_router[key]))
+      $("#val-" + j + "-input").val(parseFloat(grblParams_plasma[key]))
     }
   }
   allowGrblSettingsViewScroll = false;
@@ -890,15 +907,17 @@ function enablePlasma() {
   // elm.scrollIntoView(true);
 }
 
+var grblParams_vfd = {
+  $30: "24000", // S Max
+  $32: "0", // Laser Mode On
+  $33: "1000", //PWM Freq
+  $34: "0", //Spindle Off Value
+  $35: "0", //Spinde Min Value
+  $36: "100", //Spindle max Value
+}
+
 function enableVFD() {
-  var grblParams_vfd = {
+
-    $30: "24000", // S Max
-    $32: "0", // Laser Mode On
-    $33: "1000", //PWM Freq
-    $34: "0", //Spindle Off Value
-    $35: "0", //Spinde Min Value
-    $36: "100", //Spindle max Value
-  }
   for (var key in grblParams_vfd) {
     if (grblParams_vfd.hasOwnProperty(key)) {
       var j = key.substring(1)
@@ -916,6 +935,16 @@ function enableVFD() {
   // elm.scrollIntoView(true);
 }
 
+function isMatchingConfig(currentParams, predefinedParams) {
+  for (let key in predefinedParams) {
+    // Compare values as numbers to handle type mismatches
+    if (parseFloat(currentParams[key]) !== parseFloat(predefinedParams[key])) {
+      return false;
+    }
+  }
+  return true;
+}
+
 
 // Function to programmatically set the selected radio
 function setSelectedToolhead(value) {