update

app/js/grbl-defaults.js

@@ -742,6 +742,45 @@ function selectMachine(type) {
       $131: "730", //"Y-axis maximum travel, millimeters"
       $132: "90", //"Z-axis maximum travel, millimeters"
     }
+  } else if (type == "leadmachine1515") {
+    // Leadmachine 1010
+    var customFirmware = false;
+    var grblParams_def = {
+      $0: "10", //"Step pulse time, microseconds"
+      $1: "255", //"Step idle delay, milliseconds"
+      $2: "0", //"Step pulse invert, mask"
+      $3: "4", //"Step direction invert, mask"
+      $4: "1", //"Invert step enable pin, boolean"
+      $5: "0", //"Invert limit pins, boolean"
+      $6: "0", //"Invert probe pin, boolean"
+      $10: "1", //"Status report options, mask"
+      $11: "0.020", //"Junction deviation, millimeters"
+      $12: "0.002", //"Arc tolerance, millimeters"
+      $13: "0", //"Report in inches, boolean"
+      $20: "0", //"Soft limits enable, boolean"
+      $21: "0", //"Hard limits enable, boolean"
+      $22: "1", //"Homing cycle enable, boolean"
+      $23: "3", //"Homing direction invert, mask"
+      $24: "100.000", //"Homing locate feed rate, mm/min"
+      $25: "2000.000", //"Homing search seek rate, mm/min"
+      $26: "250", //"Homing switch debounce delay, milliseconds"
+      $27: "5.000", //"Homing switch pull-off distance, millimeters"
+      $30: "1000", //"Maximum spindle speed, RPM"
+      $31: "0", //"Minimum spindle speed, RPM"
+      $32: "0", //"Maximum spindle speed, RPM"
+      $100: "199.100", //"X-axis steps per millimeter"
+      $101: "199.100", //"Y-axis steps per millimeter"
+      $102: "199.100", //"Z-axis steps per millimeter"
+      $110: "4000.000", //"X-axis maximum rate, mm/min"
+      $111: "4000.000", //"Y-axis maximum rate, mm/min"
+      $112: "3000.000", //"Z-axis maximum rate, mm/min"
+      $120: "500.000", //"X-axis acceleration, mm/sec^2"
+      $121: "500.000", //"Y-axis acceleration, mm/sec^2"
+      $122: "500.000", //"Z-axis acceleration, mm/sec^2"
+      $130: "1170", //"X-axis maximum travel, millimeters"
+      $131: "1250", //"Y-axis maximum travel, millimeters"
+      $132: "90", //"Z-axis maximum travel, millimeters"
+    }
   } else if (type == "leadmachine1010laser") {
     // Leadmachine 55
     var customFirmware = false;
@@ -946,6 +985,9 @@ function setMachineButton(type) {
   } else if (type == "leadmachine1010") {
     template = `<img src="img/mch/` + type + `.png"/>  OpenBuilds LEAD 1010`
     overlaytype = type;
+  } else if (type == "leadmachine1515") {
+    template = `<img src="img/mch/` + type + `.png"/>  OpenBuilds LEAD 1515`
+    overlaytype = type;
   } else if (type == "custom") {
     template = `<img src="img/mch/` + type + `.png"/>  Custom Machine`
     overlaytype = type;

app/js/grblsettings.js

@@ -139,7 +139,8 @@ function grblPopulate() {
                         <a href="#" class="dropdown-toggle"><img src="img/mch/leadmachine1010.png" width="16px"/>  OpenBuilds LEAD Machine</a>
                         <ul class="ribbon-dropdown" data-role="dropdown">
                           <li onclick="selectMachine('leadmachine1010');"><a href="#"><img src="img/mch/leadmachine1010.png" width="16px"/>OpenBuilds LEAD 1010</a></li>
-                          <li onclick="selectMachine('leadmachine1010laser');"><a href="#"><img src="img/mch/leadmachine1010.png" width="16px"/>OpenBuilds LEAD 1010 with Laser Module</a></li>
+                          <li onclick="selectMachine('leadmachine1010laser');"><a href="#"><img src="img/mch/leadmachine1010laser.png" width="16px"/>OpenBuilds LEAD 1010 with Laser Module</a></li>
+                          <li onclick="selectMachine('leadmachine1515');"><a href="#"><img src="img/mch/leadmachine1515.png" width="16px"/>OpenBuilds LEAD 1515</a></li>
                         </ul>
                       </li>
                       <li><a href="#" onclick="selectMachine('minimill');"><img src="img/mch/minimill.png" width="16px"/>  OpenBuilds MiniMill</a></li>

package.json

@@ -1,6 +1,6 @@
 {
   "name": "OpenBuildsCONTROL",
-  "version": "1.0.246",
+  "version": "1.0.247",
   "license": "AGPL-3.0",
   "description": "OpenBuildsCONTROL CNC Machine Interface Software",
   "author": "github.com/openbuilds <webmaster@openbuilds.com>",