v1.0.269

2020-12-30 21:28:28 +02:00 · 2020-12-30 21:28:28 +02:00 · 83b50f1f2f
commit 83b50f1f2f
--- a/CHANGELOG.txt
+++ b/CHANGELOG.txt
@ -1,3 +1,4 @@
+v1.0.269: Added Machine profiles to Interface USB Drive Wizard, renamed menu entry for Keyboard shortcuts editor
 v1.0.268: Fixed cosmetic layout css issue
 v1.0.267: Fixed probe complete dialog, added 1% laser focus power, restore incremental if it was set prior to probe, added 3rd decimal for Inch mode DRO / padding to 2 decimals for mm mode, added Machine Coordinates to DRO tooltip, Handle M0 Pauses (Carbide etc)
 v1.0.266: Updated "error 9" dialog to also include details of earlier ALARMs for troubleshooting, Fixed CheckSize bug with Lightburn Relative Coordinates
--- a/app/index.html
+++ b/app/index.html
@ -328,7 +328,7 @@
                    <li class="disabled grblCalibrationMenu" onclick="zstepscalibrate();"><a href="#"><i class="fas fa-wrench fa-fw"></i> Calibrate Z-Axes Steps/mm</a></li>
                    <li class="disabled grblCalibrationMenu servo-active" onclick="servocalibrate();"><a href="#"><i class="fas fa-wrench fa-fw"></i> Calibrate Servo Pen Up/Down</a></li>
                    <li class="divider fg-lightGray"></li>
-                    <li onclick="keyboardShortcutsEditor();"><a href="#"><i class="far fa-edit fa-fw"></i> Customize Shortcut Key Assignments</a></li>
+                    <li onclick="keyboardShortcutsEditor();"><a href="#"><i class="far fa-edit fa-fw"></i> Customize Keyboard Shortcuts</a></li>
                    <li class="divider fg-lightGray"></li>
                    <li onclick="populateGrblBuilderToolForm();"><a href="#"><i class="fas fa-microchip fa-fw"></i> Firmware Flashing Tool</a></li>
                    <li onclick="populateFlashDrivePrepForm();"><a href="#"><i class="fas fa-upload fa-fw"></i> Prepare USB Flashdrive for Interface</a></li>
--- a/app/wizards/interface/PROFILES/ACRO1010.SET
+++ b/app/wizards/interface/PROFILES/ACRO1010.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=1 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=1 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=7 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=1 ;Laser-mode enable, boolean
+$100=57.143 ;X-axis steps per millimeter-1/16 step
+$101=57.143 ;Y-axis steps per millimeter-1/16 step
+$102=57.143 ;Z-axis steps per millimeter-1/16 step
+$110=5000.000 ;X-axis maximum rate, mm/min
+$111=5000.000 ;Y-axis maximum rate, mm/min
+$112=5000.000 ;Z-axis maximum rate, mm/min
+$120=500.000 ;X-axis acceleration, mm/sec^2
+$121=500.000 ;Y-axis acceleration, mm/sec^2
+$122=500.000 ;Z-axis acceleration, mm/sec^2
+$130=800.000 ;X-axis maximum travel, millimeters
+$131=800.000 ;Y-axis maximum travel, millimeters
+$132=70.000 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/ACRO1510.SET
+++ b/app/wizards/interface/PROFILES/ACRO1510.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=1 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=1 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=7 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=1 ;Laser-mode enable, boolean
+$100=57.143 ;X-axis steps per millimeter-1/16 step
+$101=57.143 ;Y-axis steps per millimeter-1/16 step
+$102=57.143 ;Z-axis steps per millimeter-1/16 step
+$110=5000.000 ;X-axis maximum rate, mm/min
+$111=5000.000 ;Y-axis maximum rate, mm/min
+$112=5000.000 ;Z-axis maximum rate, mm/min
+$120=500.000 ;X-axis acceleration, mm/sec^2
+$121=500.000 ;Y-axis acceleration, mm/sec^2
+$122=500.000 ;Z-axis acceleration, mm/sec^2
+$130=800.000 ;X-axis maximum travel, millimeters
+$131=1300.000 ;Y-axis maximum travel, millimeters
+$132=70.000 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/ACRO1515.SET
+++ b/app/wizards/interface/PROFILES/ACRO1515.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=1 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=1 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=7 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=1 ;Laser-mode enable, boolean
+$100=57.143 ;X-axis steps per millimeter-1/16 step
+$101=57.143 ;Y-axis steps per millimeter-1/16 step
+$102=57.143 ;Z-axis steps per millimeter-1/16 step
+$110=5000.000 ;X-axis maximum rate, mm/min
+$111=5000.000 ;Y-axis maximum rate, mm/min
+$112=5000.000 ;Z-axis maximum rate, mm/min
+$120=500.000 ;X-axis acceleration, mm/sec^2
+$121=500.000 ;Y-axis acceleration, mm/sec^2
+$122=500.000 ;Z-axis acceleration, mm/sec^2
+$130=1300.000 ;X-axis maximum travel, millimeters
+$131=1300.000 ;Y-axis maximum travel, millimeters
+$132=70.000 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/ACRO510.SET
+++ b/app/wizards/interface/PROFILES/ACRO510.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=1 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=1 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=7 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=1 ;Laser-mode enable, boolean
+$100=57.143 ;X-axis steps per millimeter-1/16 step
+$101=57.143 ;Y-axis steps per millimeter-1/16 step
+$102=57.143 ;Z-axis steps per millimeter-1/16 step
+$110=5000.000 ;X-axis maximum rate, mm/min
+$111=5000.000 ;Y-axis maximum rate, mm/min
+$112=5000.000 ;Z-axis maximum rate, mm/min
+$120=500.000 ;X-axis acceleration, mm/sec^2
+$121=500.000 ;Y-axis acceleration, mm/sec^2
+$122=500.000 ;Z-axis acceleration, mm/sec^2
+$130=800.000 ;X-axis maximum travel, millimeters
+$131=300.000 ;Y-axis maximum travel, millimeters
+$132=70.000 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/ACRO55.SET
+++ b/app/wizards/interface/PROFILES/ACRO55.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=1 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=1 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=7 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=1 ;Laser-mode enable, boolean
+$100=57.143 ;X-axis steps per millimeter-1/16 step
+$101=57.143 ;Y-axis steps per millimeter-1/16 step
+$102=57.143 ;Z-axis steps per millimeter-1/16 step
+$110=5000.000 ;X-axis maximum rate, mm/min
+$111=5000.000 ;Y-axis maximum rate, mm/min
+$112=5000.000 ;Z-axis maximum rate, mm/min
+$120=500.000 ;X-axis acceleration, mm/sec^2
+$121=500.000 ;Y-axis acceleration, mm/sec^2
+$122=500.000 ;Z-axis acceleration, mm/sec^2
+$130=300.000 ;X-axis maximum travel, millimeters
+$131=300.000 ;Y-axis maximum travel, millimeters
+$132=70.000 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/CBEAM.SET
+++ b/app/wizards/interface/PROFILES/CBEAM.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=5 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=2 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=0 ;Hard limits enable, boolean
+$22=0 ;Homing cycle enable, boolean
+$23=1 ;Homing direction invert, mask
+$24=2000.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=0 ;Laser mode
+$100=199.100 ;X-axis steps per millimeter
+$101=199.100 ;Y-axis steps per millimeter
+$102=199.100 ;Z-axis steps per millimeter
+$110=1000.000 ;X-axis maximum rate, mm/min
+$111=1000.000 ;Y-axis maximum rate, mm/min
+$112=1000.000 ;Z-axis maximum rate, mm/min
+$120=100.000 ;X-axis acceleration, mm/sec^2
+$121=100.000 ;Y-axis acceleration, mm/sec^2
+$122=100.000 ;Z-axis acceleration, mm/sec^2
+$130=270.000 ;X-axis maximum travel, millimeters
+$131=270.000 ;Y-axis maximum travel, millimeters
+$132=80.000 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/CBEAMXL.SET
+++ b/app/wizards/interface/PROFILES/CBEAMXL.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=6 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=2 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=0 ;Hard limits enable, boolean
+$22=0 ;Homing cycle enable, boolean
+$23=0 ;Homing direction invert, mask
+$24=2000.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=0 ;Laser mode
+$100=199.100 ;X-axis steps per millimeter
+$101=199.100 ;Y-axis steps per millimeter
+$102=199.100 ;Z-axis steps per millimeter
+$110=1000.000 ;X-axis maximum rate, mm/min
+$111=1000.000 ;Y-axis maximum rate, mm/min
+$112=1000.000 ;Z-axis maximum rate, mm/min
+$120=100.000 ;X-axis acceleration, mm/sec^2
+$121=100.000 ;Y-axis acceleration, mm/sec^2
+$122=100.000 ;Z-axis acceleration, mm/sec^2
+$130=200.000 ;X-axis maximum travel, millimeters
+$131=200.000 ;Y-axis maximum travel, millimeters
+$132=200.000 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/LD1010LS.SET
+++ b/app/wizards/interface/PROFILES/LD1010LS.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=4 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=0 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=3 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=255 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=1 ;Maximum spindle speed, RPM
+$100=199.100 ;X-axis steps per millimeter
+$101=199.100 ;Y-axis steps per millimeter
+$102=199.100 ;Z-axis steps per millimeter
+$110=4000.000 ;X-axis maximum rate, mm/min
+$111=4000.000 ;Y-axis maximum rate, mm/min
+$112=4000.000 ;Z-axis maximum rate, mm/min
+$120=700.000 ;X-axis acceleration, mm/sec^2
+$121=700.000 ;Y-axis acceleration, mm/sec^2
+$122=700.000 ;Z-axis acceleration, mm/sec^2
+$130=810 ;X-axis maximum travel, millimeters
+$131=730 ;Y-axis maximum travel, millimeters
+$132=90 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/LEAD1010.SET
+++ b/app/wizards/interface/PROFILES/LEAD1010.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=4 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=0 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=3 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=0 ;Laser mode
+$100=199.100 ;X-axis steps per millimeter
+$101=199.100 ;Y-axis steps per millimeter
+$102=199.100 ;Z-axis steps per millimeter
+$110=2500.000 ;X-axis maximum rate, mm/min
+$111=2500.000 ;Y-axis maximum rate, mm/min
+$112=2500.000 ;Z-axis maximum rate, mm/min
+$120=150.000 ;X-axis acceleration, mm/sec^2
+$121=150.000 ;Y-axis acceleration, mm/sec^2
+$122=150.000 ;Z-axis acceleration, mm/sec^2
+$130=810 ;X-axis maximum travel, millimeters
+$131=730 ;Y-axis maximum travel, millimeters
+$132=90 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/LEAD1515.SET
+++ b/app/wizards/interface/PROFILES/LEAD1515.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=0 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=1 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=3 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=2000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=0 ;Laser mode
+$100=198.109 ;X-axis steps per millimeter
+$101=198.109 ;Y-axis steps per millimeter
+$102=199.100 ;Z-axis steps per millimeter
+$110=3500.000 ;X-axis maximum rate, mm/min
+$111=3500.000 ;Y-axis maximum rate, mm/min
+$112=1000.000 ;Z-axis maximum rate, mm/min
+$120=350.000 ;X-axis acceleration, mm/sec^2
+$121=350.000 ;Y-axis acceleration, mm/sec^2
+$122=350.000 ;Z-axis acceleration, mm/sec^2
+$130=1170 ;X-axis maximum travel, millimeters
+$131=1250 ;Y-axis maximum travel, millimeters
+$132=90 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/MINIMILL.SET
+++ b/app/wizards/interface/PROFILES/MINIMILL.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=3 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=2 ;Status report options, mask
+$11=0.010 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=1 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=1 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=500.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=0 ;Laser mode
+$100=199.100 ;X-axis steps per millimeter
+$101=199.100 ;Y-axis steps per millimeter
+$102=199.100 ;Z-axis steps per millimeter
+$110=1500.000 ;X-axis maximum rate, mm/min
+$111=1500.000 ;Y-axis maximum rate, mm/min
+$112=1500.000 ;Z-axis maximum rate, mm/min
+$120=50.000 ;X-axis acceleration, mm/sec^2
+$121=50.000 ;Y-axis acceleration, mm/sec^2
+$122=50.000 ;Z-axis acceleration, mm/sec^2
+$130=120.000 ;X-axis maximum travel, millimeters
+$131=120.000 ;Y-axis maximum travel, millimeters
+$132=60.000 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/SPNX1050.SET
+++ b/app/wizards/interface/PROFILES/SPNX1050.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=3 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=0 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=3 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=0 ;Laser mode
+$100=199.100 ;X-axis steps per millimeter
+$101=199.100 ;Y-axis steps per millimeter
+$102=199.100 ;Z-axis steps per millimeter
+$110=2500.000 ;X-axis maximum rate, mm/min
+$111=2500.000 ;Y-axis maximum rate, mm/min
+$112=2500.000 ;Z-axis maximum rate, mm/min
+$120=150.000 ;X-axis acceleration, mm/sec^2
+$121=150.000 ;Y-axis acceleration, mm/sec^2
+$122=150.000 ;Z-axis acceleration, mm/sec^2
+$130=833.5 ;X-axis maximum travel, millimeters
+$131=325 ;Y-axis maximum travel, millimeters
+$132=85 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/SPNX55.SET
+++ b/app/wizards/interface/PROFILES/SPNX55.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=3 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=0 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=3 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=0 ;Laser mode
+$100=199.100 ;X-axis steps per millimeter
+$101=199.100 ;Y-axis steps per millimeter
+$102=199.100 ;Z-axis steps per millimeter
+$110=2500.000 ;X-axis maximum rate, mm/min
+$111=2500.000 ;Y-axis maximum rate, mm/min
+$112=2500.000 ;Z-axis maximum rate, mm/min
+$120=150.000 ;X-axis acceleration, mm/sec^2
+$121=150.000 ;Y-axis acceleration, mm/sec^2
+$122=150.000 ;Z-axis acceleration, mm/sec^2
+$130=333.000 ;X-axis maximum travel, millimeters
+$131=325.000 ;Y-axis maximum travel, millimeters
+$132=85.000 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/WBEE1010.SET
+++ b/app/wizards/interface/PROFILES/WBEE1010.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=3 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=0 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=3 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=0 ;Laser mode
+$100=199.100 ;X-axis steps per millimeter
+$101=199.100 ;Y-axis steps per millimeter
+$102=199.100 ;Z-axis steps per millimeter
+$110=2500.000 ;X-axis maximum rate, mm/min
+$111=2500.000 ;Y-axis maximum rate, mm/min
+$112=2500.000 ;Z-axis maximum rate, mm/min
+$120=150.000 ;X-axis acceleration, mm/sec^2
+$121=150.000 ;Y-axis acceleration, mm/sec^2
+$122=150.000 ;Z-axis acceleration, mm/sec^2
+$130=824.000 ;X-axis maximum travel, millimeters
+$131=780.000 ;Y-axis maximum travel, millimeters
+$132=122.000 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/WBEE1050.SET
+++ b/app/wizards/interface/PROFILES/WBEE1050.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=3 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=0 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=3 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=0 ;Laser mode
+$100=199.100 ;X-axis steps per millimeter
+$101=199.100 ;Y-axis steps per millimeter
+$102=199.100 ;Z-axis steps per millimeter
+$110=2500.000 ;X-axis maximum rate, mm/min
+$111=2500.000 ;Y-axis maximum rate, mm/min
+$112=2500.000 ;Z-axis maximum rate, mm/min
+$120=150.000 ;X-axis acceleration, mm/sec^2
+$121=150.000 ;Y-axis acceleration, mm/sec^2
+$122=150.000 ;Z-axis acceleration, mm/sec^2
+$130=317.000 ;X-axis maximum travel, millimeters
+$131=762.000 ;Y-axis maximum travel, millimeters
+$132=122.000 ;Z-axis maximum travel, millimeters
--- a/app/wizards/interface/PROFILES/WBEE1510.SET
+++ b/app/wizards/interface/PROFILES/WBEE1510.SET
@ -0,0 +1,34 @@
+$0=10 ;Step pulse time, microseconds
+$1=255 ;Step idle delay, milliseconds
+$2=0 ;Step pulse invert, mask
+$3=1 ;Step direction invert, mask
+$4=1 ;Invert step enable pin, boolean
+$5=0 ;Invert limit pins, boolean
+$6=0 ;Invert probe pin, boolean
+$10=1 ;Status report options, mask
+$11=0.020 ;Junction deviation, millimeters
+$12=0.002 ;Arc tolerance, millimeters
+$13=0 ;Report in inches, boolean
+$20=0 ;Soft limits enable, boolean
+$21=0 ;Hard limits enable, boolean
+$22=1 ;Homing cycle enable, boolean
+$23=3 ;Homing direction invert, mask
+$24=100.000 ;Homing locate feed rate, mm/min
+$25=1000.000 ;Homing search seek rate, mm/min
+$26=250 ;Homing switch debounce delay, milliseconds
+$27=5.000 ;Homing switch pull-off distance, millimeters
+$30=1000 ;Maximum spindle speed, RPM
+$31=0 ;Minimum spindle speed, RPM
+$32=0 ;Laser mode
+$100=26.667 ;X-axis steps per millimeter
+$101=26.667 ;Y-axis steps per millimeter
+$102=199.100 ;Z-axis steps per millimeter
+$110=10000.000 ;X-axis maximum rate, mm/min
+$111=10000.000 ;Y-axis maximum rate, mm/min
+$112=2500.000 ;Z-axis maximum rate, mm/min
+$120=150.000 ;X-axis acceleration, mm/sec^2
+$121=150.000 ;Y-axis acceleration, mm/sec^2
+$122=150.000 ;Z-axis acceleration, mm/sec^2
+$130=824.000 ;X-axis maximum travel, millimeters
+$131=1280.000 ;Y-axis maximum travel, millimeters
+$132=122.000 ;Z-axis maximum travel, millimeters
--- a/firmware.bin
+++ b/firmware.bin
--- a/index.js
+++ b/index.js
@ -782,6 +782,29 @@ io.on("connection", function(socket) {
        }
      });

+    var src = path.join(__dirname, './app/wizards/interface/PROFILES/');
+    var dest = path.join(data, "/PROFILES/");
+
+    ncp(src, dest,
+      function(err) {
+        if (err) {
+          var output = {
+            'command': 'Interface USB Drive',
+            'response': "Failed to copy MACHINE PROFILES to " + dest + ":  " + JSON.stringify(err),
+            'type': 'error'
+          }
+          io.sockets.emit('data', output);
+          errorCount++
+        } else {
+          var output = {
+            'command': 'Interface USB Drive',
+            'response': "Copied MACHINE PROFILES to " + dest + " succesfully!",
+            'type': 'success'
+          }
+          io.sockets.emit('data', output);
+        }
+      });
+
    setTimeout(function() {
      if (errorCount == 0) {
        var output = {
@ -2438,7 +2461,6 @@ if (isElectron()) {

      jogWindow.on('close', function(event) {
        if (!forceQuit) {
-          event.preventDefault();
          jogWindow.hide();
          return false;
        }
--- a/package-lock.json
+++ b/package-lock.json
@ -1,6 +1,6 @@
 {
  "name": "OpenBuildsCONTROL",
-  "version": "1.0.262",
+  "version": "1.0.269",
  "lockfileVersion": 1,
  "requires": true,
  "dependencies": {
@ -164,9 +164,9 @@
      "dev": true
    },
    "@types/fs-extra": {
-      "version": "9.0.1",
-      "resolved": "https://registry.npmjs.org/@types/fs-extra/-/fs-extra-9.0.1.tgz",
-      "integrity": "sha512-B42Sxuaz09MhC3DDeW5kubRcQ5by4iuVQ0cRRWM2lggLzAa/KVom0Aft/208NgMvNQQZ86s5rVcqDdn/SH0/mg==",
+      "version": "9.0.6",
+      "resolved": "https://registry.npmjs.org/@types/fs-extra/-/fs-extra-9.0.6.tgz",
+      "integrity": "sha512-ecNRHw4clCkowNOBJH1e77nvbPxHYnWIXMv1IAoG/9+MYGkgoyr3Ppxr7XYFNL41V422EDhyV4/4SSK8L2mlig==",
      "dev": true,
      "requires": {
        "@types/node": "*"
@ -186,18 +186,18 @@
      }
    },
    "@types/yargs": {
-      "version": "15.0.5",
-      "resolved": "https://registry.npmjs.org/@types/yargs/-/yargs-15.0.5.tgz",
-      "integrity": "sha512-Dk/IDOPtOgubt/IaevIUbTgV7doaKkoorvOyYM2CMwuDyP89bekI7H4xLIwunNYiK9jhCkmc6pUrJk3cj2AB9w==",
+      "version": "15.0.12",
+      "resolved": "https://registry.npmjs.org/@types/yargs/-/yargs-15.0.12.tgz",
+      "integrity": "sha512-f+fD/fQAo3BCbCDlrUpznF1A5Zp9rB0noS5vnoormHSIPFKL0Z2DcUJ3Gxp5ytH4uLRNxy7AwYUC9exZzqGMAw==",
      "dev": true,
      "requires": {
        "@types/yargs-parser": "*"
      }
    },
    "@types/yargs-parser": {
-      "version": "15.0.0",
-      "resolved": "https://registry.npmjs.org/@types/yargs-parser/-/yargs-parser-15.0.0.tgz",
-      "integrity": "sha512-FA/BWv8t8ZWJ+gEOnLLd8ygxH/2UFbAvgEonyfN6yWGLKc7zVjbpl2Y4CTjid9h2RfgPP6SEt6uHwEOply00yw==",
+      "version": "20.2.0",
+      "resolved": "https://registry.npmjs.org/@types/yargs-parser/-/yargs-parser-20.2.0.tgz",
+      "integrity": "sha512-37RSHht+gzzgYeobbG+KWryeAW8J33Nhr69cjTqSYymXVZEN9NbRYWoYlRtDhHKPVT1FyNKwaTPC1NynKZpzRA==",
      "dev": true
    },
    "accepts": {
@ -215,9 +215,9 @@
      "integrity": "sha1-/ts5T58OAqqXaOcCvaI7UF+ufh8="
    },
    "ajv": {
-      "version": "6.12.3",
-      "resolved": "https://registry.npmjs.org/ajv/-/ajv-6.12.3.tgz",
-      "integrity": "sha512-4K0cK3L1hsqk9xIb2z9vs/XU+PGJZ9PNpJRDS9YLzmNdX6jmVPfamLvTJr0aDAusnHyCHO6MjzlkAsgtqp9teA==",
+      "version": "6.12.6",
+      "resolved": "https://registry.npmjs.org/ajv/-/ajv-6.12.6.tgz",
+      "integrity": "sha512-j3fVLgvTo527anyYyJOGTYJbG+vnnQYvE0m5mmkc1TK+nxAppkCLMIL0aZ4dblVCNoGShhm+kzE4ZUykBoMg4g==",
      "dev": true,
      "requires": {
        "fast-deep-equal": "^3.1.1",
@ -297,27 +297,27 @@
      }
    },
    "app-builder-bin": {
-      "version": "3.5.9",
-      "resolved": "https://registry.npmjs.org/app-builder-bin/-/app-builder-bin-3.5.9.tgz",
-      "integrity": "sha512-NSjtqZ3x2kYiDp3Qezsgukx/AUzKPr3Xgf9by4cYt05ILWGAptepeeu0Uv+7MO+41o6ujhLixTou8979JGg2Kg==",
+      "version": "3.5.10",
+      "resolved": "https://registry.npmjs.org/app-builder-bin/-/app-builder-bin-3.5.10.tgz",
+      "integrity": "sha512-Jd+GW68lR0NeetgZDo47PdWBEPdnD+p0jEa7XaxjRC8u6Oo/wgJsfKUkORRgr2NpkD19IFKN50P6JYy04XHFLQ==",
      "dev": true
    },
    "app-builder-lib": {
-      "version": "22.8.0",
-      "resolved": "https://registry.npmjs.org/app-builder-lib/-/app-builder-lib-22.8.0.tgz",
-      "integrity": "sha512-RGaIRjCUrqkmh6QOGsyekQPEOaVynHfmeh8JZuyUymFYUOFdzBbPamkA2nhBVBTkkgfjRHsxK7LhedFKPzvWEQ==",
+      "version": "22.9.1",
+      "resolved": "https://registry.npmjs.org/app-builder-lib/-/app-builder-lib-22.9.1.tgz",
+      "integrity": "sha512-KfXim/fiNwFW2SKffsjEMdAU7RbbEXn62x5YyXle1b4j9X/wEHW9iwox8De6y0hJdR+/kCC/49lI+VgNwLhV7A==",
      "dev": true,
      "requires": {
        "7zip-bin": "~5.0.3",
        "@develar/schema-utils": "~2.6.5",
        "async-exit-hook": "^2.0.1",
        "bluebird-lst": "^1.0.9",
-        "builder-util": "22.8.0",
+        "builder-util": "22.9.1",
        "builder-util-runtime": "8.7.2",
        "chromium-pickle-js": "^0.2.0",
-        "debug": "^4.1.1",
-        "ejs": "^3.1.3",
-        "electron-publish": "22.8.0",
+        "debug": "^4.3.0",
+        "ejs": "^3.1.5",
+        "electron-publish": "22.9.1",
        "fs-extra": "^9.0.1",
        "hosted-git-info": "^3.0.5",
        "is-ci": "^2.0.0",
@ -332,11 +332,29 @@
        "temp-file": "^3.3.7"
      },
      "dependencies": {
-        "semver": {
-          "version": "7.3.2",
-          "resolved": "https://registry.npmjs.org/semver/-/semver-7.3.2.tgz",
-          "integrity": "sha512-OrOb32TeeambH6UrhtShmF7CRDqhL6/5XpPNp2DuRH6+9QLw/orhp72j87v8Qa1ScDkvrrBNpZcDejAirJmfXQ==",
+        "debug": {
+          "version": "4.3.1",
+          "resolved": "https://registry.npmjs.org/debug/-/debug-4.3.1.tgz",
+          "integrity": "sha512-doEwdvm4PCeK4K3RQN2ZC2BYUBaxwLARCqZmMjtF8a51J2Rb0xpVloFRnCODwqjpwnAoao4pelN8l3RJdv3gRQ==",
+          "dev": true,
+          "requires": {
+            "ms": "2.1.2"
+          }
+        },
+        "ms": {
+          "version": "2.1.2",
+          "resolved": "https://registry.npmjs.org/ms/-/ms-2.1.2.tgz",
+          "integrity": "sha512-sGkPx+VjMtmA6MX27oA4FBFELFCZZ4S4XqeGOXCv68tT+jb3vk/RyaKWP0PTKyWtmLSM0b+adUTEvbs1PEaH2w==",
          "dev": true
+        },
+        "semver": {
+          "version": "7.3.4",
+          "resolved": "https://registry.npmjs.org/semver/-/semver-7.3.4.tgz",
+          "integrity": "sha512-tCfb2WLjqFAtXn4KEdxIhalnRtoKFN7nAwj0B3ZXCbQloV2tq5eDbcTmT68JJD3nRJq24/XgxtQKFIpQdtvmVw==",
+          "dev": true,
+          "requires": {
+            "lru-cache": "^6.0.0"
+          }
        }
      }
    },
@ -610,9 +628,9 @@
      }
    },
    "boolean": {
-      "version": "3.0.1",
-      "resolved": "https://registry.npmjs.org/boolean/-/boolean-3.0.1.tgz",
-      "integrity": "sha512-HRZPIjPcbwAVQvOTxR4YE3o8Xs98NqbbL1iEZDCz7CL8ql0Lt5iOyJFxfnAB0oFs8Oh02F/lLlg30Mexv46LjA==",
+      "version": "3.0.2",
+      "resolved": "https://registry.npmjs.org/boolean/-/boolean-3.0.2.tgz",
+      "integrity": "sha512-RwywHlpCRc3/Wh81MiCKun4ydaIFyW5Ea6JbL6sRCVx5q5irDw7pMXBUFYF/jArQ6YrG36q0kpovc9P/Kd3I4g==",
      "dev": true,
      "optional": true
    },
@ -648,6 +666,12 @@
            "supports-color": "^7.1.0"
          }
        },
+        "has-flag": {
+          "version": "4.0.0",
+          "resolved": "https://registry.npmjs.org/has-flag/-/has-flag-4.0.0.tgz",
+          "integrity": "sha512-EykJT/Q1KjTWctppgIAgfSO0tKVuZUjhgMr17kqTumMl6Afv3EISleU7qZUzoXDFTAHTDC4NOoG/ZxU3EvlMPQ==",
+          "dev": true
+        },
        "is-fullwidth-code-point": {
          "version": "3.0.0",
          "resolved": "https://registry.npmjs.org/is-fullwidth-code-point/-/is-fullwidth-code-point-3.0.0.tgz",
@ -674,11 +698,14 @@
            "ansi-regex": "^5.0.0"
          }
        },
-        "type-fest": {
-          "version": "0.8.1",
-          "resolved": "https://registry.npmjs.org/type-fest/-/type-fest-0.8.1.tgz",
-          "integrity": "sha512-4dbzIzqvjtgiM5rw1k5rEHtBANKmdudhGyBEajN01fEyhaAIhsoKNy6y7+IN93IfpFtwY9iqi7kD+xwKhQsNJA==",
-          "dev": true
+        "supports-color": {
+          "version": "7.2.0",
+          "resolved": "https://registry.npmjs.org/supports-color/-/supports-color-7.2.0.tgz",
+          "integrity": "sha512-qpCAvRl9stuOHveKsn7HncJRvv501qIacKzQlO/+Lwxc9+0q2wLyv4Dfvt80/DPn2pqOBsJdDiogXGR9+OvwRw==",
+          "dev": true,
+          "requires": {
+            "has-flag": "^4.0.0"
+          }
        }
      }
    },
@ -716,25 +743,83 @@
      "integrity": "sha512-MQcXEUbCKtEo7bhqEs6560Hyd4XaovZlO/k9V3hjVUF/zwW7KBVdSK4gIt/bzwS9MbR5qob+F5jusZsb0YQK2A=="
    },
    "builder-util": {
-      "version": "22.8.0",
-      "resolved": "https://registry.npmjs.org/builder-util/-/builder-util-22.8.0.tgz",
-      "integrity": "sha512-H80P1JzVy3TGpi63x81epQDK24XalL034+jAZlrPb5IhLtYmnNNdxCCAVJvg3VjSISd73Y71O+uhqCxWpqbPHw==",
+      "version": "22.9.1",
+      "resolved": "https://registry.npmjs.org/builder-util/-/builder-util-22.9.1.tgz",
+      "integrity": "sha512-5hN/XOaYu4ZQUS6F+5CXE6jTo+NAnVqAxDuKGSaHWb9bejfv/rluChTLoY3/nJh7RFjkoyVjvFJv7zQDB1QmHw==",
      "dev": true,
      "requires": {
        "7zip-bin": "~5.0.3",
        "@types/debug": "^4.1.5",
        "@types/fs-extra": "^9.0.1",
-        "app-builder-bin": "3.5.9",
+        "app-builder-bin": "3.5.10",
        "bluebird-lst": "^1.0.9",
        "builder-util-runtime": "8.7.2",
        "chalk": "^4.1.0",
-        "debug": "^4.1.1",
+        "debug": "^4.3.0",
        "fs-extra": "^9.0.1",
        "is-ci": "^2.0.0",
        "js-yaml": "^3.14.0",
        "source-map-support": "^0.5.19",
        "stat-mode": "^1.0.0",
        "temp-file": "^3.3.7"
+      },
+      "dependencies": {
+        "chalk": {
+          "version": "4.1.0",
+          "resolved": "https://registry.npmjs.org/chalk/-/chalk-4.1.0.tgz",
+          "integrity": "sha512-qwx12AxXe2Q5xQ43Ac//I6v5aXTipYrSESdOgzrN+9XjgEpyjpKuvSGaN4qE93f7TQTlerQQ8S+EQ0EyDoVL1A==",
+          "dev": true,
+          "requires": {
+            "ansi-styles": "^4.1.0",
+            "supports-color": "^7.1.0"
+          }
+        },
+        "debug": {
+          "version": "4.3.1",
+          "resolved": "https://registry.npmjs.org/debug/-/debug-4.3.1.tgz",
+          "integrity": "sha512-doEwdvm4PCeK4K3RQN2ZC2BYUBaxwLARCqZmMjtF8a51J2Rb0xpVloFRnCODwqjpwnAoao4pelN8l3RJdv3gRQ==",
+          "dev": true,
+          "requires": {
+            "ms": "2.1.2"
+          }
+        },
+        "has-flag": {
+          "version": "4.0.0",
+          "resolved": "https://registry.npmjs.org/has-flag/-/has-flag-4.0.0.tgz",
+          "integrity": "sha512-EykJT/Q1KjTWctppgIAgfSO0tKVuZUjhgMr17kqTumMl6Afv3EISleU7qZUzoXDFTAHTDC4NOoG/ZxU3EvlMPQ==",
+          "dev": true
+        },
+        "ms": {
+          "version": "2.1.2",
+          "resolved": "https://registry.npmjs.org/ms/-/ms-2.1.2.tgz",
+          "integrity": "sha512-sGkPx+VjMtmA6MX27oA4FBFELFCZZ4S4XqeGOXCv68tT+jb3vk/RyaKWP0PTKyWtmLSM0b+adUTEvbs1PEaH2w==",
+          "dev": true
+        },
+        "source-map": {
+          "version": "0.6.1",
+          "resolved": "https://registry.npmjs.org/source-map/-/source-map-0.6.1.tgz",
+          "integrity": "sha512-UjgapumWlbMhkBgzT7Ykc5YXUT46F0iKu8SGXq0bcwP5dz/h0Plj6enJqjz1Zbq2l5WaqYnrVbwWOWMyF3F47g==",
+          "dev": true
+        },
+        "source-map-support": {
+          "version": "0.5.19",
+          "resolved": "https://registry.npmjs.org/source-map-support/-/source-map-support-0.5.19.tgz",
+          "integrity": "sha512-Wonm7zOCIJzBGQdB+thsPar0kYuCIzYvxZwlBa87yi/Mdjv7Tip2cyVbLj5o0cFPN4EVkuTwb3GDDyUx2DGnGw==",
+          "dev": true,
+          "requires": {
+            "buffer-from": "^1.0.0",
+            "source-map": "^0.6.0"
+          }
+        },
+        "supports-color": {
+          "version": "7.2.0",
+          "resolved": "https://registry.npmjs.org/supports-color/-/supports-color-7.2.0.tgz",
+          "integrity": "sha512-qpCAvRl9stuOHveKsn7HncJRvv501qIacKzQlO/+Lwxc9+0q2wLyv4Dfvt80/DPn2pqOBsJdDiogXGR9+OvwRw==",
+          "dev": true,
+          "requires": {
+            "has-flag": "^4.0.0"
+          }
+        }
      }
    },
    "builder-util-runtime": {
@ -794,9 +879,9 @@
      },
      "dependencies": {
        "get-stream": {
-          "version": "5.1.0",
-          "resolved": "https://registry.npmjs.org/get-stream/-/get-stream-5.1.0.tgz",
-          "integrity": "sha512-EXr1FOzrzTfGeL0gQdeFEvOMm2mzMOglyiOXSTpPC+iAjAKftbr3jpCMWynogwYnM+eSj9sHGc6wjIcDvYiygw==",
+          "version": "5.2.0",
+          "resolved": "https://registry.npmjs.org/get-stream/-/get-stream-5.2.0.tgz",
+          "integrity": "sha512-nBF+F1rAZVCu/p7rjzgA+Yb4lfYXrpl7a6VmJrU8wF9I1CKvP/QwPNZHnOlwbTkY6dvtFIzFMSyQXbLoTQPRpA==",
          "dev": true,
          "requires": {
            "pump": "^3.0.0"
@ -821,16 +906,6 @@
      "integrity": "sha512-L28STB170nwWS63UjtlEOE3dldQApaJXZkOI1uMFfzf3rRuPegHaHesyee+YxQ+W6SvRDQV6UrdOdRiR153wJg==",
      "dev": true
    },
-    "chalk": {
-      "version": "4.1.0",
-      "resolved": "https://registry.npmjs.org/chalk/-/chalk-4.1.0.tgz",
-      "integrity": "sha512-qwx12AxXe2Q5xQ43Ac//I6v5aXTipYrSESdOgzrN+9XjgEpyjpKuvSGaN4qE93f7TQTlerQQ8S+EQ0EyDoVL1A==",
-      "dev": true,
-      "requires": {
-        "ansi-styles": "^4.1.0",
-        "supports-color": "^7.1.0"
-      }
-    },
    "charenc": {
      "version": "0.0.2",
      "resolved": "https://registry.npmjs.org/charenc/-/charenc-0.0.2.tgz",
@ -862,9 +937,9 @@
      "dev": true
    },
    "cli-boxes": {
-      "version": "2.2.0",
-      "resolved": "https://registry.npmjs.org/cli-boxes/-/cli-boxes-2.2.0.tgz",
-      "integrity": "sha512-gpaBrMAizVEANOpfZp/EEUixTXDyGt7DFzdK5hU+UbWt/J0lB0w20ncZj59Z9a93xHb9u12zF5BS6i9RKbtg4w==",
+      "version": "2.2.1",
+      "resolved": "https://registry.npmjs.org/cli-boxes/-/cli-boxes-2.2.1.tgz",
+      "integrity": "sha512-y4coMcylgSCdVinjiDBuR8PCC2bLjyGTwEmPb9NHR/QaNU6EUOXcTY/s6VjGMD6ENSEaeQYHCY0GNGS5jfMwPw==",
      "dev": true
    },
    "cliui": {
@ -1075,13 +1150,6 @@
        "yargs": "^15.3.1"
      }
    },
-    "core-js": {
-      "version": "3.6.5",
-      "resolved": "https://registry.npmjs.org/core-js/-/core-js-3.6.5.tgz",
-      "integrity": "sha512-vZVEEwZoIsI+vPEuoF9Iqf5H7/M3eeQqWlQnYa8FSKKePuYTf5MWnxb5SDAzCa60b3JBRS5g9b+Dq7b1y/RCrA==",
-      "dev": true,
-      "optional": true
-    },
    "core-util-is": {
      "version": "1.0.2",
      "resolved": "https://registry.npmjs.org/core-util-is/-/core-util-is-1.0.2.tgz",
@ -1214,13 +1282,13 @@
      "integrity": "sha512-2N43msQptKbi3WMfIs+U09yi6bfyKL+MWyj5VMj8t1F/Tx04bt1cn/EEIU3o1JBltlJk7NQnzOEuTNa/KQvbWA=="
    },
    "dmg-builder": {
-      "version": "22.8.0",
-      "resolved": "https://registry.npmjs.org/dmg-builder/-/dmg-builder-22.8.0.tgz",
-      "integrity": "sha512-orePWjcrl97SYLA8F/6UUtbXJSoZCYu5KOP1lVqD4LOomr8bjGDyEVYZmZYcg5WqKmXucdmO6OpqgzH/aRMMuA==",
+      "version": "22.9.1",
+      "resolved": "https://registry.npmjs.org/dmg-builder/-/dmg-builder-22.9.1.tgz",
+      "integrity": "sha512-jc+DAirqmQrNT6KbDHdfEp8D1kD0DBTnsLhwUR3MX+hMBun5bT134LQzpdK0GKvd22GqF8L1Cz/NOgaVjscAXQ==",
      "dev": true,
      "requires": {
-        "app-builder-lib": "22.8.0",
-        "builder-util": "22.8.0",
+        "app-builder-lib": "22.9.1",
+        "builder-util": "22.9.1",
        "fs-extra": "^9.0.1",
        "iconv-lite": "^0.6.2",
        "js-yaml": "^3.14.0",
@ -1239,9 +1307,9 @@
      }
    },
    "dot-prop": {
-      "version": "5.2.0",
-      "resolved": "https://registry.npmjs.org/dot-prop/-/dot-prop-5.2.0.tgz",
-      "integrity": "sha512-uEUyaDKoSQ1M4Oq8l45hSE26SnTxL6snNnqvK/VWx5wJhmff5z0FUVJDKDanor/6w3kzE3i7XZOk+7wC0EXr1A==",
+      "version": "5.3.0",
+      "resolved": "https://registry.npmjs.org/dot-prop/-/dot-prop-5.3.0.tgz",
+      "integrity": "sha512-QM8q3zDe58hqUqjraQOmzZ1LIH9SWQJTlEKCH4kJ2oQvLZk7RbQXvtDM2XEq3fwkV9CCvvH4LA0AV+ogFsBM2Q==",
      "dev": true,
      "requires": {
        "is-obj": "^2.0.0"
@ -1297,18 +1365,18 @@
      "integrity": "sha1-WQxhFWsK4vTwJVcyoViyZrxWsh0="
    },
    "ejs": {
-      "version": "3.1.3",
-      "resolved": "https://registry.npmjs.org/ejs/-/ejs-3.1.3.tgz",
-      "integrity": "sha512-wmtrUGyfSC23GC/B1SMv2ogAUgbQEtDmTIhfqielrG5ExIM9TP4UoYdi90jLF1aTcsWCJNEO0UrgKzP0y3nTSg==",
+      "version": "3.1.5",
+      "resolved": "https://registry.npmjs.org/ejs/-/ejs-3.1.5.tgz",
+      "integrity": "sha512-dldq3ZfFtgVTJMLjOe+/3sROTzALlL9E34V4/sDtUd/KlBSS0s6U1/+WPE1B4sj9CXHJpL1M6rhNJnc9Wbal9w==",
      "dev": true,
      "requires": {
        "jake": "^10.6.1"
      }
    },
    "electron": {
-      "version": "9.2.0",
-      "resolved": "https://registry.npmjs.org/electron/-/electron-9.2.0.tgz",
-      "integrity": "sha512-4ecZ3rcGg//Gk4fAK3Jo61T+uh36JhU6HHR/PTujQqQiBw1g4tNPd4R2hGGth2d+7FkRIs5GdRNef7h64fQEMw==",
+      "version": "9.4.0",
+      "resolved": "https://registry.npmjs.org/electron/-/electron-9.4.0.tgz",
+      "integrity": "sha512-hOC4q0jkb+UDYZRy8vrZ1IANnq+jznZnbkD62OEo06nU+hIbp2IrwDRBNuSLmQ3cwZMVir0WSIA1qEVK0PkzGA==",
      "dev": true,
      "requires": {
        "@electron/get": "^1.0.1",
@ -1317,44 +1385,152 @@
      },
      "dependencies": {
        "@types/node": {
-          "version": "12.12.54",
-          "resolved": "https://registry.npmjs.org/@types/node/-/node-12.12.54.tgz",
-          "integrity": "sha512-ge4xZ3vSBornVYlDnk7yZ0gK6ChHf/CHB7Gl1I0Jhah8DDnEQqBzgohYG4FX4p81TNirSETOiSyn+y1r9/IR6w==",
+          "version": "12.19.11",
+          "resolved": "https://registry.npmjs.org/@types/node/-/node-12.19.11.tgz",
+          "integrity": "sha512-bwVfNTFZOrGXyiQ6t4B9sZerMSShWNsGRw8tC5DY1qImUNczS9SjT4G6PnzjCnxsu5Ubj6xjL2lgwddkxtQl5w==",
          "dev": true
        }
      }
    },
    "electron-builder": {
-      "version": "22.8.0",
-      "resolved": "https://registry.npmjs.org/electron-builder/-/electron-builder-22.8.0.tgz",
-      "integrity": "sha512-dUv4F3srJouqxhWivtKqSoQP4Df6vYgjooGdzms+iYMTFi9f0b4LlEbr7kgsPvte8zAglee7VOGOODkCRJDkUQ==",
+      "version": "22.9.1",
+      "resolved": "https://registry.npmjs.org/electron-builder/-/electron-builder-22.9.1.tgz",
+      "integrity": "sha512-GXPt8l5Mxwm1QKYopUM6/Tdh9W3695G6Ax+IFyj5pQ51G4SD5L1uq4/RkPSsOgs3rP7jNSV6g6OfDzdtVufPdA==",
      "dev": true,
      "requires": {
        "@types/yargs": "^15.0.5",
-        "app-builder-lib": "22.8.0",
+        "app-builder-lib": "22.9.1",
        "bluebird-lst": "^1.0.9",
-        "builder-util": "22.8.0",
+        "builder-util": "22.9.1",
        "builder-util-runtime": "8.7.2",
        "chalk": "^4.1.0",
-        "dmg-builder": "22.8.0",
+        "dmg-builder": "22.9.1",
        "fs-extra": "^9.0.1",
        "is-ci": "^2.0.0",
        "lazy-val": "^1.0.4",
        "read-config-file": "6.0.0",
        "sanitize-filename": "^1.6.3",
-        "update-notifier": "^4.1.0",
-        "yargs": "^15.3.1"
+        "update-notifier": "^4.1.1",
+        "yargs": "^16.0.3"
+      },
+      "dependencies": {
+        "ansi-regex": {
+          "version": "5.0.0",
+          "resolved": "https://registry.npmjs.org/ansi-regex/-/ansi-regex-5.0.0.tgz",
+          "integrity": "sha512-bY6fj56OUQ0hU1KjFNDQuJFezqKdrAyFdIevADiqrWHwSlbmBNMHp5ak2f40Pm8JTFyM2mqxkG6ngkHO11f/lg==",
+          "dev": true
+        },
+        "chalk": {
+          "version": "4.1.0",
+          "resolved": "https://registry.npmjs.org/chalk/-/chalk-4.1.0.tgz",
+          "integrity": "sha512-qwx12AxXe2Q5xQ43Ac//I6v5aXTipYrSESdOgzrN+9XjgEpyjpKuvSGaN4qE93f7TQTlerQQ8S+EQ0EyDoVL1A==",
+          "dev": true,
+          "requires": {
+            "ansi-styles": "^4.1.0",
+            "supports-color": "^7.1.0"
+          }
+        },
+        "cliui": {
+          "version": "7.0.4",
+          "resolved": "https://registry.npmjs.org/cliui/-/cliui-7.0.4.tgz",
+          "integrity": "sha512-OcRE68cOsVMXp1Yvonl/fzkQOyjLSu/8bhPDfQt0e0/Eb283TKP20Fs2MqoPsr9SwA595rRCA+QMzYc9nBP+JQ==",
+          "dev": true,
+          "requires": {
+            "string-width": "^4.2.0",
+            "strip-ansi": "^6.0.0",
+            "wrap-ansi": "^7.0.0"
+          }
+        },
+        "has-flag": {
+          "version": "4.0.0",
+          "resolved": "https://registry.npmjs.org/has-flag/-/has-flag-4.0.0.tgz",
+          "integrity": "sha512-EykJT/Q1KjTWctppgIAgfSO0tKVuZUjhgMr17kqTumMl6Afv3EISleU7qZUzoXDFTAHTDC4NOoG/ZxU3EvlMPQ==",
+          "dev": true
+        },
+        "is-fullwidth-code-point": {
+          "version": "3.0.0",
+          "resolved": "https://registry.npmjs.org/is-fullwidth-code-point/-/is-fullwidth-code-point-3.0.0.tgz",
+          "integrity": "sha512-zymm5+u+sCsSWyD9qNaejV3DFvhCKclKdizYaJUuHA83RLjb7nSuGnddCHGv0hk+KY7BMAlsWeK4Ueg6EV6XQg==",
+          "dev": true
+        },
+        "string-width": {
+          "version": "4.2.0",
+          "resolved": "https://registry.npmjs.org/string-width/-/string-width-4.2.0.tgz",
+          "integrity": "sha512-zUz5JD+tgqtuDjMhwIg5uFVV3dtqZ9yQJlZVfq4I01/K5Paj5UHj7VyrQOJvzawSVlKpObApbfD0Ed6yJc+1eg==",
+          "dev": true,
+          "requires": {
+            "emoji-regex": "^8.0.0",
+            "is-fullwidth-code-point": "^3.0.0",
+            "strip-ansi": "^6.0.0"
+          }
+        },
+        "strip-ansi": {
+          "version": "6.0.0",
+          "resolved": "https://registry.npmjs.org/strip-ansi/-/strip-ansi-6.0.0.tgz",
+          "integrity": "sha512-AuvKTrTfQNYNIctbR1K/YGTR1756GycPsg7b9bdV9Duqur4gv6aKqHXah67Z8ImS7WEz5QVcOtlfW2rZEugt6w==",
+          "dev": true,
+          "requires": {
+            "ansi-regex": "^5.0.0"
+          }
+        },
+        "supports-color": {
+          "version": "7.2.0",
+          "resolved": "https://registry.npmjs.org/supports-color/-/supports-color-7.2.0.tgz",
+          "integrity": "sha512-qpCAvRl9stuOHveKsn7HncJRvv501qIacKzQlO/+Lwxc9+0q2wLyv4Dfvt80/DPn2pqOBsJdDiogXGR9+OvwRw==",
+          "dev": true,
+          "requires": {
+            "has-flag": "^4.0.0"
+          }
+        },
+        "wrap-ansi": {
+          "version": "7.0.0",
+          "resolved": "https://registry.npmjs.org/wrap-ansi/-/wrap-ansi-7.0.0.tgz",
+          "integrity": "sha512-YVGIj2kamLSTxw6NsZjoBxfSwsn0ycdesmc4p+Q21c5zPuZ1pl+NfxVdxPtdHvmNVOQ6XSYG4AUtyt/Fi7D16Q==",
+          "dev": true,
+          "requires": {
+            "ansi-styles": "^4.0.0",
+            "string-width": "^4.1.0",
+            "strip-ansi": "^6.0.0"
+          }
+        },
+        "y18n": {
+          "version": "5.0.5",
+          "resolved": "https://registry.npmjs.org/y18n/-/y18n-5.0.5.tgz",
+          "integrity": "sha512-hsRUr4FFrvhhRH12wOdfs38Gy7k2FFzB9qgN9v3aLykRq0dRcdcpz5C9FxdS2NuhOrI/628b/KSTJ3rwHysYSg==",
+          "dev": true
+        },
+        "yargs": {
+          "version": "16.2.0",
+          "resolved": "https://registry.npmjs.org/yargs/-/yargs-16.2.0.tgz",
+          "integrity": "sha512-D1mvvtDG0L5ft/jGWkLpG1+m0eQxOfaBvTNELraWj22wSVUMWxZUvYgJYcKh6jGGIkJFhH4IZPQhR4TKpc8mBw==",
+          "dev": true,
+          "requires": {
+            "cliui": "^7.0.2",
+            "escalade": "^3.1.1",
+            "get-caller-file": "^2.0.5",
+            "require-directory": "^2.1.1",
+            "string-width": "^4.2.0",
+            "y18n": "^5.0.5",
+            "yargs-parser": "^20.2.2"
+          }
+        },
+        "yargs-parser": {
+          "version": "20.2.4",
+          "resolved": "https://registry.npmjs.org/yargs-parser/-/yargs-parser-20.2.4.tgz",
+          "integrity": "sha512-WOkpgNhPTlE73h4VFAFsOnomJVaovO8VqLDzy5saChRBFQFBoMYirowyW+Q9HB4HFF4Z7VZTiG3iSzJJA29yRA==",
+          "dev": true
+        }
      }
    },
    "electron-publish": {
-      "version": "22.8.0",
-      "resolved": "https://registry.npmjs.org/electron-publish/-/electron-publish-22.8.0.tgz",
-      "integrity": "sha512-uM0Zdi9hUqqGOrPj478v7toTvV1Kgto1w11rIiI168batiXAJvNLD8VZRfehOrZT0ibUyZlw8FtxoGCrjyHUOw==",
+      "version": "22.9.1",
+      "resolved": "https://registry.npmjs.org/electron-publish/-/electron-publish-22.9.1.tgz",
+      "integrity": "sha512-ducLjRJLEeU87FaTCWaUyDjCoLXHkawkltP2zqS/n2PyGke54ZIql0tBuUheht4EpR8AhFbVJ11spSn1gy8r6w==",
      "dev": true,
      "requires": {
        "@types/fs-extra": "^9.0.1",
        "bluebird-lst": "^1.0.9",
-        "builder-util": "22.8.0",
+        "builder-util": "22.9.1",
        "builder-util-runtime": "8.7.2",
        "chalk": "^4.1.0",
        "fs-extra": "^9.0.1",
@ -1362,11 +1538,36 @@
        "mime": "^2.4.6"
      },
      "dependencies": {
-        "mime": {
-          "version": "2.4.6",
-          "resolved": "https://registry.npmjs.org/mime/-/mime-2.4.6.tgz",
-          "integrity": "sha512-RZKhC3EmpBchfTGBVb8fb+RL2cWyw/32lshnsETttkBAyAUXSGHxbEJWWRXc751DrIxG1q04b8QwMbAwkRPpUA==",
+        "chalk": {
+          "version": "4.1.0",
+          "resolved": "https://registry.npmjs.org/chalk/-/chalk-4.1.0.tgz",
+          "integrity": "sha512-qwx12AxXe2Q5xQ43Ac//I6v5aXTipYrSESdOgzrN+9XjgEpyjpKuvSGaN4qE93f7TQTlerQQ8S+EQ0EyDoVL1A==",
+          "dev": true,
+          "requires": {
+            "ansi-styles": "^4.1.0",
+            "supports-color": "^7.1.0"
+          }
+        },
+        "has-flag": {
+          "version": "4.0.0",
+          "resolved": "https://registry.npmjs.org/has-flag/-/has-flag-4.0.0.tgz",
+          "integrity": "sha512-EykJT/Q1KjTWctppgIAgfSO0tKVuZUjhgMr17kqTumMl6Afv3EISleU7qZUzoXDFTAHTDC4NOoG/ZxU3EvlMPQ==",
          "dev": true
+        },
+        "mime": {
+          "version": "2.4.7",
+          "resolved": "https://registry.npmjs.org/mime/-/mime-2.4.7.tgz",
+          "integrity": "sha512-dhNd1uA2u397uQk3Nv5LM4lm93WYDUXFn3Fu291FJerns4jyTudqhIWe4W04YLy7Uk1tm1Ore04NpjRvQp/NPA==",
+          "dev": true
+        },
+        "supports-color": {
+          "version": "7.2.0",
+          "resolved": "https://registry.npmjs.org/supports-color/-/supports-color-7.2.0.tgz",
+          "integrity": "sha512-qpCAvRl9stuOHveKsn7HncJRvv501qIacKzQlO/+Lwxc9+0q2wLyv4Dfvt80/DPn2pqOBsJdDiogXGR9+OvwRw==",
+          "dev": true,
+          "requires": {
+            "has-flag": "^4.0.0"
+          }
        }
      }
    },
@ -1486,6 +1687,12 @@
      "dev": true,
      "optional": true
    },
+    "escalade": {
+      "version": "3.1.1",
+      "resolved": "https://registry.npmjs.org/escalade/-/escalade-3.1.1.tgz",
+      "integrity": "sha512-k0er2gUkLf8O0zKJiAhmkTnJlTvINGv7ygDNPbeIsX/TJjGJZHuh9B2UxbsaEkmlEo9MfhrSzmhIlhRlI2GXnw==",
+      "dev": true
+    },
    "escape-goat": {
      "version": "2.1.1",
      "resolved": "https://registry.npmjs.org/escape-goat/-/escape-goat-2.1.1.tgz",
@ -1498,11 +1705,10 @@
      "integrity": "sha1-Aljq5NPQwJdN4cFpGI7wBR0dGYg="
    },
    "escape-string-regexp": {
-      "version": "4.0.0",
-      "resolved": "https://registry.npmjs.org/escape-string-regexp/-/escape-string-regexp-4.0.0.tgz",
-      "integrity": "sha512-TtpcNJ3XAzx3Gq8sWRzJaVajRs0uVxA2YAkdb1jm2YkPz4G6egUFAyA3n5vtEIZefPk5Wa4UXbKuS5fKkJWdgA==",
-      "dev": true,
-      "optional": true
+      "version": "1.0.5",
+      "resolved": "https://registry.npmjs.org/escape-string-regexp/-/escape-string-regexp-1.0.5.tgz",
+      "integrity": "sha1-G2HAViGQqN/2rjuyzwIAyhMLhtQ=",
+      "dev": true
    },
    "esprima": {
      "version": "4.0.1",
@ -1745,6 +1951,12 @@
      "resolved": "https://registry.npmjs.org/fs.realpath/-/fs.realpath-1.0.0.tgz",
      "integrity": "sha1-FQStJSMVjKpA20onh8sBQRmU6k8="
    },
+    "function-bind": {
+      "version": "1.1.1",
+      "resolved": "https://registry.npmjs.org/function-bind/-/function-bind-1.1.1.tgz",
+      "integrity": "sha512-yIovAzMX49sF8Yl58fSCWJ5svSLuaibPxXQJFLmBObTuCr0Mf1KiPopGM9NiFjiYBCbfaa2Fh6breQ6ANVTI0A==",
+      "dev": true
+    },
    "gauge": {
      "version": "2.7.4",
      "resolved": "https://registry.npmjs.org/gauge/-/gauge-2.7.4.tgz",
@ -1809,22 +2021,40 @@
        "serialize-error": "^7.0.1"
      },
      "dependencies": {
-        "semver": {
-          "version": "7.3.2",
-          "resolved": "https://registry.npmjs.org/semver/-/semver-7.3.2.tgz",
-          "integrity": "sha512-OrOb32TeeambH6UrhtShmF7CRDqhL6/5XpPNp2DuRH6+9QLw/orhp72j87v8Qa1ScDkvrrBNpZcDejAirJmfXQ==",
+        "core-js": {
+          "version": "3.8.1",
+          "resolved": "https://registry.npmjs.org/core-js/-/core-js-3.8.1.tgz",
+          "integrity": "sha512-9Id2xHY1W7m8hCl8NkhQn5CufmF/WuR30BTRewvCXc1aZd3kMECwNZ69ndLbekKfakw9Rf2Xyc+QR6E7Gg+obg==",
          "dev": true,
          "optional": true
+        },
+        "semver": {
+          "version": "7.3.4",
+          "resolved": "https://registry.npmjs.org/semver/-/semver-7.3.4.tgz",
+          "integrity": "sha512-tCfb2WLjqFAtXn4KEdxIhalnRtoKFN7nAwj0B3ZXCbQloV2tq5eDbcTmT68JJD3nRJq24/XgxtQKFIpQdtvmVw==",
+          "dev": true,
+          "optional": true,
+          "requires": {
+            "lru-cache": "^6.0.0"
+          }
        }
      }
    },
    "global-dirs": {
-      "version": "2.0.1",
-      "resolved": "https://registry.npmjs.org/global-dirs/-/global-dirs-2.0.1.tgz",
-      "integrity": "sha512-5HqUqdhkEovj2Of/ms3IeS/EekcO54ytHRLV4PEY2rhRwrHXLQjeVEES0Lhka0xwNDtGYn58wyC4s5+MHsOO6A==",
+      "version": "2.1.0",
+      "resolved": "https://registry.npmjs.org/global-dirs/-/global-dirs-2.1.0.tgz",
+      "integrity": "sha512-MG6kdOUh/xBnyo9cJFeIKkLEc1AyFq42QTU4XiX51i2NEdxLxLWXIjEjmqKeSuKR7pAZjTqUVoT2b2huxVLgYQ==",
      "dev": true,
      "requires": {
-        "ini": "^1.3.5"
+        "ini": "1.3.7"
+      },
+      "dependencies": {
+        "ini": {
+          "version": "1.3.7",
+          "resolved": "https://registry.npmjs.org/ini/-/ini-1.3.7.tgz",
+          "integrity": "sha512-iKpRpXP+CrP2jyrxvg1kMUpXDyRUFDWurxbnVT1vQPx+Wz9uCYsMIqYuSBLV+PAaZG/d7kRLKRFc9oDMsH+mFQ==",
+          "dev": true
+        }
      }
    },
    "global-tunnel-ng": {
@ -1874,6 +2104,15 @@
      "resolved": "https://registry.npmjs.org/graceful-fs/-/graceful-fs-4.2.4.tgz",
      "integrity": "sha512-WjKPNJF79dtJAVniUlGGWHYGz2jWxT6VhN/4m1NdkbZ2nOsEF+cI1Edgql5zCRhs/VsQYRvrXctxktVXZUkixw=="
    },
+    "has": {
+      "version": "1.0.3",
+      "resolved": "https://registry.npmjs.org/has/-/has-1.0.3.tgz",
+      "integrity": "sha512-f2dvO0VU6Oej7RkWJGrehjbzMAjFp5/VKPp5tTpWIV4JHHZK1/BxbFRtf/siA2SWTe09caDmVtYYzWEIbBS4zw==",
+      "dev": true,
+      "requires": {
+        "function-bind": "^1.1.1"
+      }
+    },
    "has-binary2": {
      "version": "1.0.3",
      "resolved": "https://registry.npmjs.org/has-binary2/-/has-binary2-1.0.3.tgz",
@ -1895,9 +2134,9 @@
      "integrity": "sha1-XkdHk/fqmEPRu5nCPu9J/xJv/zk="
    },
    "has-flag": {
-      "version": "4.0.0",
-      "resolved": "https://registry.npmjs.org/has-flag/-/has-flag-4.0.0.tgz",
-      "integrity": "sha512-EykJT/Q1KjTWctppgIAgfSO0tKVuZUjhgMr17kqTumMl6Afv3EISleU7qZUzoXDFTAHTDC4NOoG/ZxU3EvlMPQ==",
+      "version": "3.0.0",
+      "resolved": "https://registry.npmjs.org/has-flag/-/has-flag-3.0.0.tgz",
+      "integrity": "sha1-tdRU3CGZriJWmfNGfloH87lVuv0=",
      "dev": true
    },
    "has-unicode": {
@ -1920,9 +2159,9 @@
      }
    },
    "hosted-git-info": {
-      "version": "3.0.5",
-      "resolved": "https://registry.npmjs.org/hosted-git-info/-/hosted-git-info-3.0.5.tgz",
-      "integrity": "sha512-i4dpK6xj9BIpVOTboXIlKG9+8HMKggcrMX7WA24xZtKwX0TPelq/rbaS5rCKeNX8sJXZJGdSxpnEGtta+wismQ==",
+      "version": "3.0.7",
+      "resolved": "https://registry.npmjs.org/hosted-git-info/-/hosted-git-info-3.0.7.tgz",
+      "integrity": "sha512-fWqc0IcuXs+BmE9orLDyVykAG9GJtGLGuZAAqgcckPgv5xad4AcXGIv8galtQvlwutxSlaMcdw7BUtq2EIvqCQ==",
      "dev": true,
      "requires": {
        "lru-cache": "^6.0.0"
@ -2029,6 +2268,15 @@
        "ci-info": "^2.0.0"
      }
    },
+    "is-core-module": {
+      "version": "2.2.0",
+      "resolved": "https://registry.npmjs.org/is-core-module/-/is-core-module-2.2.0.tgz",
+      "integrity": "sha512-XRAfAdyyY5F5cOXn7hYQDqh2Xmii+DEfIcQGxK/uNwMHhIkPWO0g8msXcbzLe+MpGoR951MlqM/2iIlU4vKDdQ==",
+      "dev": true,
+      "requires": {
+        "has": "^1.0.3"
+      }
+    },
    "is-fullwidth-code-point": {
      "version": "1.0.0",
      "resolved": "https://registry.npmjs.org/is-fullwidth-code-point/-/is-fullwidth-code-point-1.0.0.tgz",
@ -2146,18 +2394,6 @@
          "integrity": "sha1-p9BVi9icQveV3UIyj3QIMcpTvCU=",
          "dev": true
        },
-        "escape-string-regexp": {
-          "version": "1.0.5",
-          "resolved": "https://registry.npmjs.org/escape-string-regexp/-/escape-string-regexp-1.0.5.tgz",
-          "integrity": "sha1-G2HAViGQqN/2rjuyzwIAyhMLhtQ=",
-          "dev": true
-        },
-        "has-flag": {
-          "version": "3.0.0",
-          "resolved": "https://registry.npmjs.org/has-flag/-/has-flag-3.0.0.tgz",
-          "integrity": "sha1-tdRU3CGZriJWmfNGfloH87lVuv0=",
-          "dev": true
-        },
        "supports-color": {
          "version": "5.5.0",
          "resolved": "https://registry.npmjs.org/supports-color/-/supports-color-5.5.0.tgz",
@ -2330,6 +2566,15 @@
      "optional": true,
      "requires": {
        "escape-string-regexp": "^4.0.0"
+      },
+      "dependencies": {
+        "escape-string-regexp": {
+          "version": "4.0.0",
+          "resolved": "https://registry.npmjs.org/escape-string-regexp/-/escape-string-regexp-4.0.0.tgz",
+          "integrity": "sha512-TtpcNJ3XAzx3Gq8sWRzJaVajRs0uVxA2YAkdb1jm2YkPz4G6egUFAyA3n5vtEIZefPk5Wa4UXbKuS5fKkJWdgA==",
+          "dev": true,
+          "optional": true
+        }
      }
    },
    "md5": {
@ -2455,9 +2700,9 @@
      "integrity": "sha512-hZXc7K2e+PgeI1eDBe/10Ard4ekbfrrqG8Ep+8Jmf4JID2bNg7NvCPOZN+kfF574pFQI7mum2AUqDidoKqcTOw=="
    },
    "node-abi": {
-      "version": "2.18.0",
-      "resolved": "https://registry.npmjs.org/node-abi/-/node-abi-2.18.0.tgz",
-      "integrity": "sha512-yi05ZoiuNNEbyT/xXfSySZE+yVnQW6fxPZuFbLyS1s6b5Kw3HzV2PHOM4XR+nsjzkHxByK+2Wg+yCQbe35l8dw==",
+      "version": "2.19.3",
+      "resolved": "https://registry.npmjs.org/node-abi/-/node-abi-2.19.3.tgz",
+      "integrity": "sha512-9xZrlyfvKhWme2EXFKQhZRp1yNWT/uI1luYPr3sFl+H4keYY4xR+1jO7mvTTijIsHf1M+QDe9uWuKeEpLInIlg==",
      "requires": {
        "semver": "^5.4.1"
      }
@ -2750,9 +2995,9 @@
      "dev": true
    },
    "pupa": {
-      "version": "2.0.1",
-      "resolved": "https://registry.npmjs.org/pupa/-/pupa-2.0.1.tgz",
-      "integrity": "sha512-hEJH0s8PXLY/cdXh66tNEQGndDrIKNqNC5xmrysZy3i5C3oEoLna7YAOad+7u125+zH1HNXUmGEkrhb3c2VriA==",
+      "version": "2.1.1",
+      "resolved": "https://registry.npmjs.org/pupa/-/pupa-2.1.1.tgz",
+      "integrity": "sha512-l1jNAspIBSFqbT+y+5FosojNpVpF94nlI+wDUpqP9enwOTfHx9f0gh5nB96vl+6yTpsJsypeNrwfzPrKuHB41A==",
      "dev": true,
      "requires": {
        "escape-goat": "^2.0.0"
@ -2827,9 +3072,9 @@
      }
    },
    "registry-auth-token": {
-      "version": "4.2.0",
-      "resolved": "https://registry.npmjs.org/registry-auth-token/-/registry-auth-token-4.2.0.tgz",
-      "integrity": "sha512-P+lWzPrsgfN+UEpDS3U8AQKg/UjZX6mQSJueZj3EK+vNESoqBSpBUD3gmu4sF9lOsjXWjF11dQKUqemf3veq1w==",
+      "version": "4.2.1",
+      "resolved": "https://registry.npmjs.org/registry-auth-token/-/registry-auth-token-4.2.1.tgz",
+      "integrity": "sha512-6gkSb4U6aWJB4SF2ZvLb76yCBjcvufXBqvvEx1HbmKPkutswjW1xNVRY0+daljIYRbogN7O0etYSlbiaEQyMyw==",
      "dev": true,
      "requires": {
        "rc": "^1.2.8"
@ -2857,11 +3102,12 @@
      "dev": true
    },
    "resolve": {
-      "version": "1.17.0",
-      "resolved": "https://registry.npmjs.org/resolve/-/resolve-1.17.0.tgz",
-      "integrity": "sha512-ic+7JYiV8Vi2yzQGFWOkiZD5Z9z7O2Zhm9XMaTxdJExKasieFCr+yXZ/WmXsckHiKl12ar0y6XiXDx3m4RHn1w==",
+      "version": "1.19.0",
+      "resolved": "https://registry.npmjs.org/resolve/-/resolve-1.19.0.tgz",
+      "integrity": "sha512-rArEXAgsBG4UgRGcynxWIWKFvh/XZCcS8UJdHhwy91zwAvCZIbcs+vAbflgBnNjYMs/i/i+/Ux6IZhML1yPvxg==",
      "dev": true,
      "requires": {
+        "is-core-module": "^2.1.0",
        "path-parse": "^1.0.6"
      }
    },
@ -2883,13 +3129,13 @@
      }
    },
    "roarr": {
-      "version": "2.15.3",
-      "resolved": "https://registry.npmjs.org/roarr/-/roarr-2.15.3.tgz",
-      "integrity": "sha512-AEjYvmAhlyxOeB9OqPUzQCo3kuAkNfuDk/HqWbZdFsqDFpapkTjiw+p4svNEoRLvuqNTxqfL+s+gtD4eDgZ+CA==",
+      "version": "2.15.4",
+      "resolved": "https://registry.npmjs.org/roarr/-/roarr-2.15.4.tgz",
+      "integrity": "sha512-CHhPh+UNHD2GTXNYhPWLnU8ONHdI+5DI+4EYIAOaiD63rHeYlZvyh8P+in5999TTSFgUYuKUAjzRI4mdh/p+2A==",
      "dev": true,
      "optional": true,
      "requires": {
-        "boolean": "^3.0.0",
+        "boolean": "^3.0.1",
        "detect-node": "^2.0.4",
        "globalthis": "^1.0.1",
        "json-stringify-safe": "^5.0.1",
@ -3009,6 +3255,15 @@
      "optional": true,
      "requires": {
        "type-fest": "^0.13.1"
+      },
+      "dependencies": {
+        "type-fest": {
+          "version": "0.13.1",
+          "resolved": "https://registry.npmjs.org/type-fest/-/type-fest-0.13.1.tgz",
+          "integrity": "sha512-34R7HTnG0XIJcBSn5XhDd7nNFPRcXYRZrBB2O2jdKqYODldSzBAqzsWoZYYvduky73toYS/ESqxPvkDf/F0XMg==",
+          "dev": true,
+          "optional": true
+        }
      }
    },
    "serialport": {
@ -3240,22 +3495,6 @@
        }
      }
    },
-    "source-map": {
-      "version": "0.6.1",
-      "resolved": "https://registry.npmjs.org/source-map/-/source-map-0.6.1.tgz",
-      "integrity": "sha512-UjgapumWlbMhkBgzT7Ykc5YXUT46F0iKu8SGXq0bcwP5dz/h0Plj6enJqjz1Zbq2l5WaqYnrVbwWOWMyF3F47g==",
-      "dev": true
-    },
-    "source-map-support": {
-      "version": "0.5.19",
-      "resolved": "https://registry.npmjs.org/source-map-support/-/source-map-support-0.5.19.tgz",
-      "integrity": "sha512-Wonm7zOCIJzBGQdB+thsPar0kYuCIzYvxZwlBa87yi/Mdjv7Tip2cyVbLj5o0cFPN4EVkuTwb3GDDyUx2DGnGw==",
-      "dev": true,
-      "requires": {
-        "buffer-from": "^1.0.0",
-        "source-map": "^0.6.0"
-      }
-    },
    "spdx-correct": {
      "version": "3.1.1",
      "resolved": "https://registry.npmjs.org/spdx-correct/-/spdx-correct-3.1.1.tgz",
@ -3283,9 +3522,9 @@
      }
    },
    "spdx-license-ids": {
-      "version": "3.0.5",
-      "resolved": "https://registry.npmjs.org/spdx-license-ids/-/spdx-license-ids-3.0.5.tgz",
-      "integrity": "sha512-J+FWzZoynJEXGphVIS+XEh3kFSjZX/1i9gFBaWQcB+/tmpe2qUsSBABpcxqxnAxFdiUFEgAX1bjYGQvIZmoz9Q==",
+      "version": "3.0.7",
+      "resolved": "https://registry.npmjs.org/spdx-license-ids/-/spdx-license-ids-3.0.7.tgz",
+      "integrity": "sha512-U+MTEOO0AiDzxwFvoa4JVnMV6mZlJKk2sBLt90s7G0Gd0Mlknc7kxEn3nuDPNZRta7O2uy8oLcZLVT+4sqNZHQ==",
      "dev": true
    },
    "sprintf-js": {
@ -3376,15 +3615,6 @@
        "debug": "^4.1.0"
      }
    },
-    "supports-color": {
-      "version": "7.1.0",
-      "resolved": "https://registry.npmjs.org/supports-color/-/supports-color-7.1.0.tgz",
-      "integrity": "sha512-oRSIpR8pxT1Wr2FquTNnGet79b3BWljqOuoW/h4oBhxJ/HUbX5nX6JSruTkvXDCFMwDPvsaTTbvMLKZWSy0R5g==",
-      "dev": true,
-      "requires": {
-        "has-flag": "^4.0.0"
-      }
-    },
    "tar-fs": {
      "version": "2.1.0",
      "resolved": "https://registry.npmjs.org/tar-fs/-/tar-fs-2.1.0.tgz",
@ -3472,9 +3702,9 @@
      }
    },
    "term-size": {
-      "version": "2.2.0",
-      "resolved": "https://registry.npmjs.org/term-size/-/term-size-2.2.0.tgz",
-      "integrity": "sha512-a6sumDlzyHVJWb8+YofY4TW112G6p2FCPEAFk+59gIYHv3XHRhm9ltVQ9kli4hNWeQBwSpe8cRN25x0ROunMOw==",
+      "version": "2.2.1",
+      "resolved": "https://registry.npmjs.org/term-size/-/term-size-2.2.1.tgz",
+      "integrity": "sha512-wK0Ri4fOGjv/XPy8SBHZChl8CM7uMc5VML7SqiQ0zG7+J5Vr+RMQDoHa2CNT6KHUnTGIXH34UDMkPzAUyapBZg==",
      "dev": true
    },
    "through2": {
@ -3554,11 +3784,10 @@
      }
    },
    "type-fest": {
-      "version": "0.13.1",
-      "resolved": "https://registry.npmjs.org/type-fest/-/type-fest-0.13.1.tgz",
-      "integrity": "sha512-34R7HTnG0XIJcBSn5XhDd7nNFPRcXYRZrBB2O2jdKqYODldSzBAqzsWoZYYvduky73toYS/ESqxPvkDf/F0XMg==",
-      "dev": true,
-      "optional": true
+      "version": "0.8.1",
+      "resolved": "https://registry.npmjs.org/type-fest/-/type-fest-0.8.1.tgz",
+      "integrity": "sha512-4dbzIzqvjtgiM5rw1k5rEHtBANKmdudhGyBEajN01fEyhaAIhsoKNy6y7+IN93IfpFtwY9iqi7kD+xwKhQsNJA==",
+      "dev": true
    },
    "type-is": {
      "version": "1.6.18",
@ -3618,9 +3847,9 @@
      "integrity": "sha1-sr9O6FFKrmFltIF4KdIbLvSZBOw="
    },
    "update-notifier": {
-      "version": "4.1.0",
-      "resolved": "https://registry.npmjs.org/update-notifier/-/update-notifier-4.1.0.tgz",
-      "integrity": "sha512-w3doE1qtI0/ZmgeoDoARmI5fjDoT93IfKgEGqm26dGUOh8oNpaSTsGNdYRN/SjOuo10jcJGwkEL3mroKzktkew==",
+      "version": "4.1.3",
+      "resolved": "https://registry.npmjs.org/update-notifier/-/update-notifier-4.1.3.tgz",
+      "integrity": "sha512-Yld6Z0RyCYGB6ckIjffGOSOmHXj1gMeE7aROz4MG+XMkmixBX4jUngrGXNYz7wPKBmtoD4MnBa2Anu7RSKht/A==",
      "dev": true,
      "requires": {
        "boxen": "^4.2.0",
@ -3647,13 +3876,28 @@
            "ansi-styles": "^4.1.0",
            "supports-color": "^7.1.0"
          }
+        },
+        "has-flag": {
+          "version": "4.0.0",
+          "resolved": "https://registry.npmjs.org/has-flag/-/has-flag-4.0.0.tgz",
+          "integrity": "sha512-EykJT/Q1KjTWctppgIAgfSO0tKVuZUjhgMr17kqTumMl6Afv3EISleU7qZUzoXDFTAHTDC4NOoG/ZxU3EvlMPQ==",
+          "dev": true
+        },
+        "supports-color": {
+          "version": "7.2.0",
+          "resolved": "https://registry.npmjs.org/supports-color/-/supports-color-7.2.0.tgz",
+          "integrity": "sha512-qpCAvRl9stuOHveKsn7HncJRvv501qIacKzQlO/+Lwxc9+0q2wLyv4Dfvt80/DPn2pqOBsJdDiogXGR9+OvwRw==",
+          "dev": true,
+          "requires": {
+            "has-flag": "^4.0.0"
+          }
        }
      }
    },
    "uri-js": {
-      "version": "4.2.2",
-      "resolved": "https://registry.npmjs.org/uri-js/-/uri-js-4.2.2.tgz",
-      "integrity": "sha512-KY9Frmirql91X2Qgjry0Wd4Y+YTdrdZheS8TFwvkbLWf/G5KNJDCh6pKL5OZctEW4+0Baa5idK2ZQuELRwPznQ==",
+      "version": "4.4.0",
+      "resolved": "https://registry.npmjs.org/uri-js/-/uri-js-4.4.0.tgz",
+      "integrity": "sha512-B0yRTzYdUCCn9n+F4+Gh4yIDtMQcaJsmYBDsTSG8g/OejKBodLQ2IHfN3bM7jUsRXndopT7OIXWdYqc1fjmV6g==",
      "dev": true,
      "requires": {
        "punycode": "^2.1.0"
--- a/package.json
+++ b/package.json
@ -1,6 +1,6 @@
 {
  "name": "OpenBuildsCONTROL",
-  "version": "1.0.268",
+  "version": "1.0.269",
  "license": "AGPL-3.0",
  "description": "OpenBuildsCONTROL CNC Machine Interface Software",
  "author": "github.com/openbuilds <webmaster@openbuilds.com>",