.. |
AFSKModulator.hpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
AFSKTestTone.cpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
AFSKTestTone.hpp
|
Massive update to get the NucleoTNC firmware up to date with the TNC3. Mostly improvements to the moduleator and demodulator sections. Fix EEPROM read/write. Update version number to 1.0.0.
|
2019-06-22 21:53:34 -05:00 |
AGC.hpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
Afsk1200Demodulator.cpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
Afsk1200Demodulator.hpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
AfskDemodulator.cpp
|
Massive update to get the NucleoTNC firmware up to date with the TNC3. Mostly improvements to the moduleator and demodulator sections. Fix EEPROM read/write. Update version number to 1.0.0.
|
2019-06-22 21:53:34 -05:00 |
AfskDemodulator.hpp
|
Massive update to get the NucleoTNC firmware up to date with the TNC3. Mostly improvements to the moduleator and demodulator sections. Fix EEPROM read/write. Update version number to 1.0.0.
|
2019-06-22 21:53:34 -05:00 |
AudioInput.cpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
AudioInput.hpp
|
Massive update to get the NucleoTNC firmware up to date with the TNC3. Mostly improvements to the moduleator and demodulator sections. Fix EEPROM read/write. Update version number to 1.0.0.
|
2019-06-22 21:53:34 -05:00 |
AudioLevel.cpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
AudioLevel.hpp
|
Move some pins around, use LED3, and name the AUDIO_IN pin. Initialize DAC, Op Amp and ADC in main(). Increase ADC clock to 80MHz and enable 16x oversampling. Increase sample time to 6.5 cycles. Support up to 16-bit ADC values (oversampling). Widen the DFT bins used for twist detection. Increase the amount of error checking we do. Improve input gain setting algorithm.
|
2018-08-05 19:21:52 -05:00 |
DelayLine.hpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
Demodulator.cpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
Demodulator.hpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
Digipeater.cpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
Digipeater.h
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
Digipeater.hpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
DigitalPLL.hpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
FilterCoefficients.cpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
FilterCoefficients.hpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
FirFilter.hpp
|
Massive update to get the NucleoTNC firmware up to date with the TNC3. Mostly improvements to the moduleator and demodulator sections. Fix EEPROM read/write. Update version number to 1.0.0.
|
2019-06-22 21:53:34 -05:00 |
Fsk9600Demodulator.cpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
Fsk9600Demodulator.hpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
Fsk9600Modulator.cpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
Fsk9600Modulator.hpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
GPIO.hpp
|
Move some pins around, use LED3, and name the AUDIO_IN pin. Initialize DAC, Op Amp and ADC in main(). Increase ADC clock to 80MHz and enable 16x oversampling. Increase sample time to 6.5 cycles. Support up to 16-bit ADC values (oversampling). Widen the DFT bins used for twist detection. Increase the amount of error checking we do. Improve input gain setting algorithm.
|
2018-08-05 19:21:52 -05:00 |
Goertzel.cpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
Goertzel.h
|
Massive update to get the NucleoTNC firmware up to date with the TNC3. Mostly improvements to the moduleator and demodulator sections. Fix EEPROM read/write. Update version number to 1.0.0.
|
2019-06-22 21:53:34 -05:00 |
HDLCEncoder.hpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
HdlcDecoder.cpp
|
Massive update to get the NucleoTNC firmware up to date with the TNC3. Mostly improvements to the moduleator and demodulator sections. Fix EEPROM read/write. Update version number to 1.0.0.
|
2019-06-22 21:53:34 -05:00 |
HdlcDecoder.hpp
|
Massive update to get the NucleoTNC firmware up to date with the TNC3. Mostly improvements to the moduleator and demodulator sections. Fix EEPROM read/write. Update version number to 1.0.0.
|
2019-06-22 21:53:34 -05:00 |
HdlcFrame.cpp
|
Massive update to get the NucleoTNC firmware up to date with the TNC3. Mostly improvements to the moduleator and demodulator sections. Fix EEPROM read/write. Update version number to 1.0.0.
|
2019-06-22 21:53:34 -05:00 |
HdlcFrame.hpp
|
Massive update to get the NucleoTNC firmware up to date with the TNC3. Mostly improvements to the moduleator and demodulator sections. Fix EEPROM read/write. Update version number to 1.0.0.
|
2019-06-22 21:53:34 -05:00 |
Hysteresis.hpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
IOEventTask.cpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
IOEventTask.h
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
IirFilter.hpp
|
Massive update to get the NucleoTNC firmware up to date with the TNC3. Mostly improvements to the moduleator and demodulator sections. Fix EEPROM read/write. Update version number to 1.0.0.
|
2019-06-22 21:53:34 -05:00 |
Kiss.cpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
Kiss.hpp
|
Fix SLIP encoding defect in frame encoder.
|
2020-01-06 19:37:24 -06:00 |
KissHardware.cpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
KissHardware.hpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
KissTask.cpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
Led.cpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
Led.h
|
Fix broken critical section handling when toggling LEDs.
|
2018-08-12 11:44:53 -05:00 |
Log.cpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
Log.h
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
Modulator.hpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
ModulatorTask.cpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
ModulatorTask.hpp
|
Start of 9600 baud support.
|
2020-01-10 11:58:25 -06:00 |
NRZI.hpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
NullPort.cpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
NullPort.hpp
|
Wait, don't crash, when a buffer is unavailable.
|
2020-01-07 20:33:44 -06:00 |
PTT.hpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
PortInterface.cpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
PortInterface.h
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
PortInterface.hpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
SegmentedBuffer.hpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
SerialPort.cpp
|
Wait, don't crash, when a buffer is unavailable.
|
2020-01-07 20:33:44 -06:00 |
SerialPort.h
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
SerialPort.hpp
|
Wait, don't crash, when a buffer is unavailable.
|
2020-01-07 20:33:44 -06:00 |
memory.hpp
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |
power.h
|
Add TNC code, openocd configs, etc.
|
2018-07-29 21:34:53 -05:00 |