diff --git a/software/Firmware/Src/ApplicationBuilder.c b/software/Firmware/Src/ApplicationBuilder.c
old mode 100644
new mode 100755
index 12f9187..fe96f00
--- a/software/Firmware/Src/ApplicationBuilder.c
+++ b/software/Firmware/Src/ApplicationBuilder.c
@@ -17,7 +17,7 @@ static MCP3425A0TConfig_t adcConfig[]={{ADC_CHIP_1_PIN}, {ADC_CHIP_2_PIN}};
 
 bool ApplicationBuilder_Init()
 {
-	uint8_t amountOfADC = sizeof(adcConfig) / sizeof(adcConfig[0]);
+/*	uint8_t amountOfADC = sizeof(adcConfig) / sizeof(adcConfig[0]);
 
 	for(uint8_t i = 0U; i < amountOfADC; i++)
 	{
@@ -26,7 +26,7 @@ bool ApplicationBuilder_Init()
 
 	PeakDetector_Init(PEAK_DETECTOR_PIN);
 
-
+*/
 	return TRUE;
 }
 
diff --git a/software/Firmware/Src/main.c b/software/Firmware/Src/main.c
old mode 100644
new mode 100755
index 589231e..98cce24
--- a/software/Firmware/Src/main.c
+++ b/software/Firmware/Src/main.c
@@ -10,32 +10,34 @@
 #include "ApplicationBuilder.h"
 
 #define LED_GPIO_PORT  (GPIOD)
-#define LED_GPIO_PINS  (GPIO_PIN_2 | GPIO_PIN_3)
+#define LED_GPIO_PINS  ( GPIO_PIN_0)
 
 int main( void )
 {
 	// just to test if the firmware is alive
-	 GPIO_Init(LED_GPIO_PORT, (GPIO_Pin_TypeDef)LED_GPIO_PINS, GPIO_MODE_OUT_PP_LOW_FAST);
-	 GPIO_WriteReverse(LED_GPIO_PORT, (GPIO_Pin_TypeDef)LED_GPIO_PINS);
+	 GPIO_Init(LED_GPIO_PORT, LED_GPIO_PINS,  GPIO_MODE_OUT_OD_LOW_FAST);
+	 //GPIO_WriteHigh(LED_GPIO_PORT, LED_GPIO_PINS);
+	 GPIO_WriteLow(LED_GPIO_PORT, LED_GPIO_PINS);
 
-	ApplicationBuilder_Init();
+//	ApplicationBuilder_Init();
 
 	while(TRUE)
 	{
-		ApplicationBuilder_Tick();
+		//ApplicationBuilder_Tick();
 	}
 }
 
 #ifdef USE_FULL_ASSERT
 
 void assert_failed(uint8_t* file, uint32_t line)
-{ 
+{
 	(void)file;
 	(void)line;
 
 	while (TRUE)
 	{
 		// empty
+	    GPIO_WriteHigh(LED_GPIO_PORT, LED_GPIO_PINS);
 	}
 }
 
diff --git a/software/Firmware/makefile b/software/Firmware/makefile
old mode 100644
new mode 100755
index e08da92..1cbe130
--- a/software/Firmware/makefile
+++ b/software/Firmware/makefile
@@ -28,9 +28,13 @@ IHX         = $(BUILD_DIR)/$(TARGET).ihx
 ################### BUILD PROCESS ###################
 .PHONY: all build clean flash
 
-all: build
+all: make_build_dir build
 
-build:$(IHX)
+
+make_build_dir:
+	mkdir -p $(BUILD_DIR)
+
+build:	$(IHX)
 
 
 
@@ -72,5 +76,5 @@ clean:
 	rm -rf $(BUILD_DIR)/*
 
 flash: $(IHX)
-	stm8flash -c stlinkv2 -p stm8s105k4 -s flash -w $<
+	/opt/stm8flash -c stlink -p stm8s103f3 -w $<