Hamlib/icom/ic7000.c

286 wiersze
9.4 KiB
C

/*
* Hamlib CI-V backend - description of IC-7000 and variations
* Adapted from IC-7800 code 2006 by Kent Hill
* Copyright (c) 2004-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include <hamlib/rig.h>
#include "token.h"
#include "idx_builtin.h"
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#include "misc.h"
#include "bandplan.h"
#define IC7000_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM|RIG_MODE_WFM)
#define IC7000_1HZ_TS_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR)
#define IC7000_NOT_TS_MODES (IC7000_ALL_RX_MODES &~IC7000_1HZ_TS_MODES)
#define IC7000_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
#define IC7000_AM_TX_MODES (RIG_MODE_AM)
#define IC7000_FUNCS (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_MON|RIG_FUNC_MN|RIG_FUNC_ANF|RIG_FUNC_VSC|RIG_FUNC_LOCK|RIG_FUNC_ARO)
#define IC7000_LEVELS (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_COMP|RIG_LEVEL_BKINDL|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_KEYSPD|RIG_LEVEL_NOTCHF|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_VOXGAIN|RIG_LEVEL_VOXDELAY|RIG_LEVEL_SWR|RIG_LEVEL_ALC)
#define IC7000_VFOS (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define IC7000_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT|RIG_PARM_APO|RIG_PARM_TIME|RIG_PARM_BEEP)
#define IC7000_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL|RIG_OP_TUNE)
#define IC7000_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_PROG|RIG_SCAN_SLCT|RIG_SCAN_PRIO)
#define IC7000_ANTS (RIG_ANT_1|RIG_ANT_2) /* ant-1 is Hf-6m, ant-2 is 2m-70cm */
/*
* Measurement by Mark, WA0TOP
*
* s/n 0503103.
* Preamp off, ATT off, mode AM, f=10 MHz
*/
#define IC7000_STR_CAL { 14, \
{ \
{ 0, -54 }, /* first one is made up */ \
{ 5, -29 }, \
{ 15, -27 }, \
{ 43, -22 }, \
{ 68, -17 }, \
{ 92, -12 }, \
{ 120, -6 }, \
{ 141, 2 }, \
{ 162, 13 }, \
{ 182, 25 }, \
{ 202, 38 }, \
{ 222, 47 }, \
{ 241, 57 }, \
{ 255, 63 } \
} }
/*
*
* IC7000 channel caps.
*/
#define IC7000_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.split = 1, \
.tx_freq = 1, \
.tx_mode = 1, \
.tx_width = 1, \
.rptr_offs = 1, \
.rptr_shift = 1, \
.ctcss_tone = 1, \
.ctcss_sql = 1, \
.funcs = IC7000_FUNCS, \
.levels = RIG_LEVEL_SET(IC7000_LEVELS), \
}
/*
* IC-7000 rig capabilities.
*
* TODO: complete command set (esp. the $1A bunch!) and testing..
*/
static const struct icom_priv_caps IC7000_priv_caps = {
0x70, /* default address */
0, /* 731 mode */
ic7000_ts_sc_list
};
const struct rig_caps ic7000_caps = {
.rig_model = RIG_MODEL_IC7000,
.model_name = "IC-7000",
.mfg_name = "Icom",
.version = BACKEND_VER ".2",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = IC7000_FUNCS,
.has_set_func = IC7000_FUNCS,
.has_get_level = IC7000_LEVELS,
.has_set_level = RIG_LEVEL_SET(IC7000_LEVELS),
.has_get_parm = IC7000_PARMS,
.has_set_parm = RIG_PARM_SET(IC7000_PARMS),
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = common_dcs_list,
.preamp = { 10, RIG_DBLST_END, }, /* FIXME: TBC it's a guess*/
.attenuator = { 12, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(0), /* TODO */
.targetable_vfo = 0,
.vfo_ops = IC7000_VFO_OPS,
.scan_ops = IC7000_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 5,
.chan_desc_sz = 0, /* TODO */
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM, IC7000_MEM_CAP },
{ 100, 105, RIG_MTYPE_EDGE, IC7000_MEM_CAP }, /* two by two */
{ 106, 107, RIG_MTYPE_CALL, IC7000_MEM_CAP },
RIG_CHAN_END,
},
.rx_range_list1 = { {kHz(30),MHz(199.999999),IC7000_ALL_RX_MODES,-1,-1,IC7000_VFOS},
{MHz(400),MHz(470), IC7000_ALL_RX_MODES,-1,-1,IC7000_VFOS}, RIG_FRNG_END, },
.tx_range_list1 = {
FRQ_RNG_HF(1,IC7000_OTHER_TX_MODES, W(2),W(100),IC7000_VFOS,RIG_ANT_1),
FRQ_RNG_6m(1,IC7000_OTHER_TX_MODES, W(2),W(100),IC7000_VFOS,RIG_ANT_1),
FRQ_RNG_2m(1,IC7000_OTHER_TX_MODES, W(2),W(50),IC7000_VFOS,RIG_ANT_2),
FRQ_RNG_70cm(1,IC7000_OTHER_TX_MODES, W(2), W(35), IC7000_VFOS, RIG_ANT_2),
FRQ_RNG_HF(1,IC7000_AM_TX_MODES, W(1),W(40),IC7000_VFOS,RIG_ANT_1), /* AM class */
FRQ_RNG_6m(1,IC7000_AM_TX_MODES, W(1),W(40),IC7000_VFOS,RIG_ANT_1), /* AM class */
FRQ_RNG_2m(1,IC7000_AM_TX_MODES, W(2),W(20),IC7000_VFOS,RIG_ANT_2),
FRQ_RNG_70cm(1,IC7000_OTHER_TX_MODES, W(2), W(14), IC7000_VFOS, RIG_ANT_2),
RIG_FRNG_END, },
.rx_range_list2 = { {kHz(30),MHz(199.999999),IC7000_ALL_RX_MODES,-1,-1,IC7000_VFOS},
{MHz(400),MHz(470), IC7000_ALL_RX_MODES,-1,-1,IC7000_VFOS}, RIG_FRNG_END, },
.tx_range_list2 = { /* needs the 5 mhz channels added */
FRQ_RNG_HF(2,IC7000_OTHER_TX_MODES, W(2),W(100),IC7000_VFOS,RIG_ANT_1),
FRQ_RNG_6m(2,IC7000_OTHER_TX_MODES, W(2),W(100),IC7000_VFOS,RIG_ANT_1),
FRQ_RNG_2m(2,IC7000_OTHER_TX_MODES, W(2),W(50),IC7000_VFOS,RIG_ANT_2),
FRQ_RNG_70cm(2,IC7000_OTHER_TX_MODES, W(2), W(35), IC7000_VFOS, RIG_ANT_2),
FRQ_RNG_HF(2,IC7000_AM_TX_MODES, W(1),W(40),IC7000_VFOS,RIG_ANT_1), /* AM class */
FRQ_RNG_6m(2,IC7000_AM_TX_MODES, W(1),W(40),IC7000_VFOS,RIG_ANT_1), /* AM class */
FRQ_RNG_2m(2,IC7000_AM_TX_MODES, W(2),W(20),IC7000_VFOS,RIG_ANT_2),
FRQ_RNG_70cm(2,IC7000_OTHER_TX_MODES, W(2), W(14), IC7000_VFOS, RIG_ANT_2),
RIG_FRNG_END, },
.tuning_steps = {
{IC7000_1HZ_TS_MODES,1},
{IC7000_NOT_TS_MODES,10},
{IC7000_ALL_RX_MODES,Hz(100)},
{IC7000_ALL_RX_MODES,kHz(1)},
{IC7000_ALL_RX_MODES,kHz(5)},
{IC7000_ALL_RX_MODES,kHz(9)},
{IC7000_ALL_RX_MODES,kHz(10)},
{IC7000_ALL_RX_MODES,kHz(12.5)},
{IC7000_ALL_RX_MODES,kHz(20)},
{IC7000_ALL_RX_MODES,kHz(25)},
{IC7000_ALL_RX_MODES,kHz(100)},
{IC7000_NOT_TS_MODES,MHz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! But duplication may speed up search. Put the most commonly used modes first! Remember these are defaults, with dsp rigs you can change them to anything you want except FM and WFM which are fixed */
.filters = {
{RIG_MODE_SSB, kHz(2.4)},
{RIG_MODE_SSB, kHz(1.8)},
{RIG_MODE_SSB, kHz(3)},
{RIG_MODE_FM, kHz(10)},
{RIG_MODE_FM, kHz(15)},
{RIG_MODE_FM, kHz(7)},
{RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR, Hz(500)},
{RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_RTTY|RIG_MODE_RTTYR, Hz(250)},
{RIG_MODE_CW|RIG_MODE_CWR, kHz(1.2)},
{RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(2.4)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_AM, kHz(3)},
{RIG_MODE_AM, kHz(9)},
{RIG_MODE_WFM, kHz(280)},
RIG_FLT_END,
},
.str_cal = IC7000_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&IC7000_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.set_ant = NULL, /*automatically set by rig depending band */
.get_ant = NULL,
.set_rit = icom_set_rit,
.decode_event = icom_decode_event,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_parm = NULL,
.get_parm = NULL,
.set_mem = icom_set_mem,
.set_bank = icom_set_bank,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ptt = icom_set_ptt,
.get_ptt = icom_get_ptt,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.get_ts = NULL,
.set_rptr_shift = icom_set_rptr_shift,
.get_rptr_shift = NULL,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_ctcss_tone = icom_set_ctcss_tone,
.get_ctcss_tone = icom_get_ctcss_tone,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_dcs_code = icom_set_dcs_code,
.get_dcs_code = icom_get_dcs_code,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = NULL,
};