mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/src/conf.c

1400 wiersze
36 KiB
C
Czysty Wina Historia

/**
* \addtogroup rig
* @{
*/
/**
* \file src/conf.c
* \brief Rig configuration interface
* \author Stephane Fillod
* \date 2000-2012
*/
/*
* Hamlib Interface - configuration interface
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <hamlib/config.h>
#include <stdlib.h>
#include <stdarg.h>
#include <stdio.h> /* Standard input/output definitions */
#include <string.h> /* String function definitions */
#include <hamlib/rig.h>
#include "token.h"
/*
* Configuration options available in the rig->state struct.
*/
static const struct confparams frontend_cfg_params[] =
{
{
TOK_PATHNAME, "rig_pathname", "Rig path name",
"Path name to the device file of the rig",
"/dev/rig", RIG_CONF_STRING,
},
{
TOK_WRITE_DELAY, "write_delay", "Write delay",
"Delay in ms between each byte sent out",
"0", RIG_CONF_NUMERIC, { .n = { 0, 1000, 1 } }
},
{
TOK_POST_WRITE_DELAY, "post_write_delay", "Post write delay",
"Delay in ms between each command sent out",
"0", RIG_CONF_NUMERIC, { .n = { 0, 1000, 1 } }
},
{
TOK_TIMEOUT, "timeout", "Timeout", "Timeout in ms",
"0", RIG_CONF_NUMERIC, { .n = { 0, 10000, 1 } }
},
{
TOK_RETRY, "retry", "Retry", "Max number of retry",
"0", RIG_CONF_NUMERIC, { .n = { 0, 10, 1 } }
},
{
TOK_TIMEOUT_RETRY, "timeout_retry", "Number of retries for read timeouts",
"Set the number of retries for data read timeouts that may occur especially with some serial interfaces",
"1", RIG_CONF_NUMERIC, { .n = { 0, 100, 1 } }
},
{
TOK_RANGE_SELECTED, "Selected range list", "Range list#",
"The tx/rx range list in use",
"0", RIG_CONF_NUMERIC, { .n = { 1, 5, 1 } }
},
{
TOK_RANGE_NAME, "Selected range list", "Range list name",
"The tx/rx range list name",
"Default", RIG_CONF_STRING
},
{
TOK_VFO_COMP, "vfo_comp", "VFO compensation",
"VFO compensation in ppm",
"0", RIG_CONF_NUMERIC, { .n = { 0.0, 1000.0, .001 } }
},
{
TOK_POLL_INTERVAL, "poll_interval", "Rig state poll interval in milliseconds",
"Polling interval in milliseconds for transceive emulation, value of 0 disables polling",
"0", RIG_CONF_NUMERIC, { .n = { 0, 1000000, 1 } }
},
{
TOK_PTT_TYPE, "ptt_type", "PTT type",
"Push-To-Talk interface type override",
"RIG", RIG_CONF_COMBO, { .c = {{ "RIG", "RIGMICDATA", "DTR", "RTS", "Parallel", "CM108", "GPIO", "GPION", "None", NULL }} }
},
{
TOK_PTT_PATHNAME, "ptt_pathname", "PTT path name",
"Path name to the device file of the Push-To-Talk",
"/dev/rig", RIG_CONF_STRING,
},
{
TOK_PTT_BITNUM, "ptt_bitnum", "PTT bit [0-7]",
"Push-To-Talk GPIO bit number",
"2", RIG_CONF_NUMERIC, { .n = { 0, 7, 1 } }
},
{
TOK_DCD_TYPE, "dcd_type", "DCD type",
"Data Carrier Detect (or squelch) interface type override",
"RIG", RIG_CONF_COMBO, { .c = {{ "RIG", "DSR", "CTS", "CD", "Parallel", "CM108", "GPIO", "GPION", "None", NULL }} }
},
{
TOK_DCD_PATHNAME, "dcd_pathname", "DCD path name",
"Path name to the device file of the Data Carrier Detect (or squelch)",
"/dev/rig", RIG_CONF_STRING,
},
{
TOK_LO_FREQ, "lo_freq", "LO Frequency",
"Frequency to add to the VFO frequency for use with a transverter",
"0", RIG_CONF_NUMERIC, { .n = {0.0, 1e9, .1}}
},
{
TOK_CACHE_TIMEOUT, "cache_timeout", "Cache timeout value in ms",
"Cache timeout, value of 0 disables caching",
"500", RIG_CONF_NUMERIC, { .n = {0, 5000, 1}}
},
{
TOK_AUTO_POWER_ON, "auto_power_on", "Auto power on",
"True enables compatible rigs to be powered up on open",
"0", RIG_CONF_CHECKBUTTON, { }
},
{
TOK_AUTO_POWER_OFF, "auto_power_off", "Auto power off",
"True enables compatible rigs to be powered down on close",
"0", RIG_CONF_CHECKBUTTON, { }
},
{
TOK_AUTO_DISABLE_SCREENSAVER, "auto_disable_screensaver", "Auto disable screen saver",
"True enables compatible rigs to have their screen saver disabled on open",
"0", RIG_CONF_CHECKBUTTON, { }
},
{
TOK_DISABLE_YAESU_BANDSELECT, "disable_yaesu_bandselect", "Disable Yaesu band select logic",
"True disables the automatic band select on band change for Yaesu rigs",
"0", RIG_CONF_CHECKBUTTON, { }
},
{
TOK_PTT_SHARE, "ptt_share", "Share ptt port with other apps",
"True enables ptt port to be shared with other apps",
"0", RIG_CONF_CHECKBUTTON, { }
},
{
TOK_FLUSHX, "flushx", "Flush with read instead of TCFLUSH",
"True enables flushing serial port with read instead of TCFLUSH -- MicroHam",
"0", RIG_CONF_CHECKBUTTON, { }
},
{
TOK_TWIDDLE_TIMEOUT, "twiddle_timeout", "Timeout(secs) to resume VFO polling when twiddling VFO",
"For satellite ops when VFOB is twiddled will pause VFOB commands until timeout",
"Unset", RIG_CONF_COMBO, { .c = {{ "Unset", "ON", "OFF", NULL }} }
},
{
TOK_TWIDDLE_RIT, "twiddle_rit", "RIT twiddle",
"Suppress get_freq on VFOB for RIT tuning satellites",
"Unset", RIG_CONF_COMBO, { .c = {{ "Unset", "ON", "OFF", NULL }} }
},
{
TOK_ASYNC, "async", "Asynchronous data transfer support",
"True enables asynchronous data transfer for backends that support it. This allows use of transceive and spectrum data.",
"0", RIG_CONF_CHECKBUTTON, { }
},
{
TOK_TUNER_CONTROL_PATHNAME, "tuner_control_pathname", "Tuner script/program path name",
"Path name to a script/program to control a tuner with 1 argument of 0/1 for Tuner Off/On",
"hamlib_tuner_control", RIG_CONF_STRING,
},
{
TOK_OFFSET_VFOA, "offset_vfoa", "Offset value in Hz",
"Add Hz to VFOA/Main frequency set",
"0", RIG_CONF_NUMERIC, { .n = {0, 1e12, 1}}
},
{
TOK_OFFSET_VFOB, "offset_vfob", "Offset value in Hz",
"Add Hz to VFOB/Sub frequency set",
"0", RIG_CONF_NUMERIC, { .n = {0, 1e12, 1}}
},
{ RIG_CONF_END, NULL, }
};
static const struct confparams frontend_serial_cfg_params[] =
{
{
TOK_SERIAL_SPEED, "serial_speed", "Serial speed",
"Serial port baud rate",
"0", RIG_CONF_NUMERIC, { .n = { 300, 115200, 1 } }
},
{
TOK_DATA_BITS, "data_bits", "Serial data bits",
"Serial port data bits",
"8", RIG_CONF_NUMERIC, { .n = { 5, 8, 1 } }
},
{
TOK_STOP_BITS, "stop_bits", "Serial stop bits",
"Serial port stop bits",
"1", RIG_CONF_NUMERIC, { .n = { 0, 3, 1 } }
},
{
TOK_PARITY, "serial_parity", "Serial parity",
"Serial port parity",
"None", RIG_CONF_COMBO, { .c = {{ "None", "Odd", "Even", "Mark", "Space", NULL }} }
},
{
TOK_HANDSHAKE, "serial_handshake", "Serial handshake",
"Serial port handshake",
"None", RIG_CONF_COMBO, { .c = {{ "None", "XONXOFF", "Hardware", NULL }} }
},
{
TOK_RTS_STATE, "rts_state", "RTS state",
"Serial port set state of RTS signal for external powering",
"Unset", RIG_CONF_COMBO, { .c = {{ "Unset", "ON", "OFF", NULL }} }
},
{
TOK_DTR_STATE, "dtr_state", "DTR state",
"Serial port set state of DTR signal for external powering",
"Unset", RIG_CONF_COMBO, { .c = {{ "Unset", "ON", "OFF", NULL }} }
},
{ RIG_CONF_END, NULL, }
};
/*
* frontend_set_conf
* assumes rig!=NULL, val!=NULL
*/
static int frontend_set_conf(RIG *rig, token_t token, const char *val)
{
const struct rig_caps *caps;
struct rig_state *rs;
long val_i;
caps = rig->caps;
rs = &rig->state;
switch (token)
{
case TOK_PATHNAME:
strncpy(rs->rigport.pathname, val, HAMLIB_FILPATHLEN - 1);
strncpy(rs->rigport_deprecated.pathname, val, HAMLIB_FILPATHLEN - 1);
break;
case TOK_WRITE_DELAY:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL;//value format error
}
rs->rigport.write_delay = val_i;
rs->rigport_deprecated.write_delay = val_i;
break;
case TOK_POST_WRITE_DELAY:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL;//value format error
}
rs->rigport.post_write_delay = val_i;
rs->rigport_deprecated.timeout = val_i;
break;
case TOK_TIMEOUT:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL;//value format error
}
rs->rigport.timeout = val_i;
rs->rigport_deprecated.timeout = val_i;
break;
case TOK_RETRY:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL;//value format error
}
rs->rigport.retry = val_i;
rs->rigport_deprecated.retry = val_i;
break;
case TOK_SERIAL_SPEED:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
return -RIG_EINVAL;
}
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL;//value format error
}
rs->rigport.parm.serial.rate = val_i;
rs->rigport_deprecated.parm.serial.rate = val_i;
break;
case TOK_DATA_BITS:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
return -RIG_EINVAL;
}
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL;//value format error
}
rs->rigport.parm.serial.data_bits = val_i;
rs->rigport_deprecated.parm.serial.data_bits = val_i;
break;
case TOK_STOP_BITS:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
return -RIG_EINVAL;
}
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL;//value format error
}
rs->rigport.parm.serial.stop_bits = val_i;
rs->rigport_deprecated.parm.serial.stop_bits = val_i;
break;
case TOK_PARITY:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
return -RIG_EINVAL;
}
if (!strcmp(val, "None"))
{
rs->rigport.parm.serial.parity = RIG_PARITY_NONE;
rs->rigport_deprecated.parm.serial.parity = RIG_PARITY_SPACE;
}
else if (!strcmp(val, "Odd"))
{
rs->rigport.parm.serial.parity = RIG_PARITY_ODD;
rs->rigport_deprecated.parm.serial.parity = RIG_PARITY_SPACE;
}
else if (!strcmp(val, "Even"))
{
rs->rigport.parm.serial.parity = RIG_PARITY_EVEN;
rs->rigport_deprecated.parm.serial.parity = RIG_PARITY_SPACE;
}
else if (!strcmp(val, "Mark"))
{
rs->rigport.parm.serial.parity = RIG_PARITY_MARK;
rs->rigport_deprecated.parm.serial.parity = RIG_PARITY_SPACE;
}
else if (!strcmp(val, "Space"))
{
rs->rigport.parm.serial.parity = RIG_PARITY_SPACE;
rs->rigport_deprecated.parm.serial.parity = RIG_PARITY_SPACE;
}
else
{
return -RIG_EINVAL;
}
break;
case TOK_HANDSHAKE:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
rig_debug(RIG_DEBUG_ERR,
"%s: setting handshake is invalid for non-serial port rig type\n",
__func__);
return -RIG_EINVAL;
}
if (!strcmp(val, "None"))
{
rs->rigport.parm.serial.handshake = RIG_HANDSHAKE_NONE;
rs->rigport_deprecated.parm.serial.handshake = RIG_HANDSHAKE_HARDWARE;
}
else if (!strcmp(val, "XONXOFF"))
{
rs->rigport.parm.serial.handshake = RIG_HANDSHAKE_XONXOFF;
rs->rigport_deprecated.parm.serial.handshake = RIG_HANDSHAKE_HARDWARE;
}
else if (!strcmp(val, "Hardware"))
{
rs->rigport.parm.serial.handshake = RIG_HANDSHAKE_HARDWARE;
rs->rigport_deprecated.parm.serial.handshake = RIG_HANDSHAKE_HARDWARE;
}
else
{
return -RIG_EINVAL;
}
break;
case TOK_RTS_STATE:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
return -RIG_EINVAL;
}
if (!strcmp(val, "Unset"))
{
rs->rigport.parm.serial.rts_state = RIG_SIGNAL_UNSET;
rs->rigport_deprecated.parm.serial.rts_state = RIG_SIGNAL_UNSET;
}
else if (!strcmp(val, "ON"))
{
rs->rigport.parm.serial.rts_state = RIG_SIGNAL_ON;
rs->rigport_deprecated.parm.serial.rts_state = RIG_SIGNAL_ON;
}
else if (!strcmp(val, "OFF"))
{
rs->rigport.parm.serial.rts_state = RIG_SIGNAL_OFF;
rs->rigport_deprecated.parm.serial.rts_state = RIG_SIGNAL_OFF;
}
else
{
return -RIG_EINVAL;
}
break;
case TOK_DTR_STATE:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
return -RIG_EINVAL;
}
if (!strcmp(val, "Unset"))
{
rs->rigport.parm.serial.dtr_state = RIG_SIGNAL_UNSET;
rs->rigport_deprecated.parm.serial.dtr_state = RIG_SIGNAL_UNSET;
}
else if (!strcmp(val, "ON"))
{
rs->rigport.parm.serial.dtr_state = RIG_SIGNAL_ON;
rs->rigport_deprecated.parm.serial.dtr_state = RIG_SIGNAL_ON;
}
else if (!strcmp(val, "OFF"))
{
rs->rigport.parm.serial.dtr_state = RIG_SIGNAL_OFF;
rs->rigport_deprecated.parm.serial.dtr_state = RIG_SIGNAL_OFF;
}
else
{
return -RIG_EINVAL;
}
break;
case TOK_RANGE_SELECTED:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL;//value format error
}
switch (val_i)
{
case 1:
memcpy(rs->tx_range_list, caps->tx_range_list1,
sizeof(struct freq_range_list)*HAMLIB_FRQRANGESIZ);
memcpy(rs->rx_range_list, caps->rx_range_list1,
sizeof(struct freq_range_list)*HAMLIB_FRQRANGESIZ);
break;
case 2:
memcpy(rs->tx_range_list, caps->tx_range_list2,
sizeof(struct freq_range_list)*HAMLIB_FRQRANGESIZ);
memcpy(rs->rx_range_list, caps->rx_range_list2,
sizeof(struct freq_range_list)*HAMLIB_FRQRANGESIZ);
break;
case 3:
memcpy(rs->tx_range_list, caps->tx_range_list3,
sizeof(struct freq_range_list)*HAMLIB_FRQRANGESIZ);
memcpy(rs->rx_range_list, caps->rx_range_list3,
sizeof(struct freq_range_list)*HAMLIB_FRQRANGESIZ);
break;
case 4:
memcpy(rs->tx_range_list, caps->tx_range_list4,
sizeof(struct freq_range_list)*HAMLIB_FRQRANGESIZ);
memcpy(rs->rx_range_list, caps->rx_range_list4,
sizeof(struct freq_range_list)*HAMLIB_FRQRANGESIZ);
break;
case 5:
memcpy(rs->tx_range_list, caps->tx_range_list5,
sizeof(struct freq_range_list)*HAMLIB_FRQRANGESIZ);
memcpy(rs->rx_range_list, caps->rx_range_list5,
sizeof(struct freq_range_list)*HAMLIB_FRQRANGESIZ);
break;
default:
return -RIG_EINVAL;
}
break;
case TOK_PTT_TYPE:
if (!strcmp(val, "RIG"))
{
rs->pttport.type.ptt = RIG_PTT_RIG;
}
else if (!strcmp(val, "RIGMICDATA"))
{
rs->pttport.type.ptt = RIG_PTT_RIG_MICDATA;
}
else if (!strcmp(val, "DTR"))
{
rs->pttport.type.ptt = RIG_PTT_SERIAL_DTR;
}
else if (!strcmp(val, "RTS"))
{
rs->pttport.type.ptt = RIG_PTT_SERIAL_RTS;
}
else if (!strcmp(val, "Parallel"))
{
rs->pttport.type.ptt = RIG_PTT_PARALLEL;
}
else if (!strcmp(val, "CM108"))
{
rs->pttport.type.ptt = RIG_PTT_CM108;
}
else if (!strcmp(val, "GPIO"))
{
rs->pttport.type.ptt = RIG_PTT_GPIO;
}
else if (!strcmp(val, "GPION"))
{
rs->pttport.type.ptt = RIG_PTT_GPION;
}
else if (!strcmp(val, "None"))
{
rs->pttport.type.ptt = RIG_PTT_NONE;
}
else
{
return -RIG_EINVAL;
}
// JTDX and WSJTX currently use state.pttport to check for PTT_NONE
rig->state.pttport.type.ptt = rs->pttport.type.ptt;
rs->pttport_deprecated.type.ptt = rs->pttport.type.ptt;
break;
case TOK_PTT_PATHNAME:
strncpy(rs->pttport.pathname, val, HAMLIB_FILPATHLEN - 1);
strncpy(rs->pttport_deprecated.pathname, val, HAMLIB_FILPATHLEN - 1);
break;
case TOK_PTT_BITNUM:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL;//value format error
}
rs->pttport.parm.cm108.ptt_bitnum = val_i;
rs->rigport.parm.cm108.ptt_bitnum = val_i;
rs->pttport_deprecated.parm.cm108.ptt_bitnum = val_i;
break;
case TOK_DCD_TYPE:
if (!strcmp(val, "RIG"))
{
rs->dcdport.type.dcd = RIG_DCD_RIG;
rs->dcdport_deprecated.type.dcd = RIG_DCD_RIG;
}
else if (!strcmp(val, "DSR"))
{
rs->dcdport.type.dcd = RIG_DCD_SERIAL_DSR;
rs->dcdport_deprecated.type.dcd = RIG_DCD_SERIAL_DSR;
}
else if (!strcmp(val, "CTS"))
{
rs->dcdport.type.dcd = RIG_DCD_SERIAL_CTS;
rs->dcdport_deprecated.type.dcd = RIG_DCD_SERIAL_CTS;
}
else if (!strcmp(val, "CD"))
{
rs->dcdport.type.dcd = RIG_DCD_SERIAL_CAR;
rs->dcdport_deprecated.type.dcd = RIG_DCD_SERIAL_CAR;
}
else if (!strcmp(val, "Parallel"))
{
rs->dcdport.type.dcd = RIG_DCD_PARALLEL;
rs->dcdport_deprecated.type.dcd = RIG_DCD_PARALLEL;
}
else if (!strcmp(val, "CM108"))
{
rs->dcdport.type.dcd = RIG_DCD_CM108;
rs->dcdport_deprecated.type.dcd = RIG_DCD_CM108;
}
else if (!strcmp(val, "GPIO"))
{
rs->dcdport.type.dcd = RIG_DCD_GPIO;
rs->dcdport_deprecated.type.dcd = RIG_DCD_GPIO;
}
else if (!strcmp(val, "GPION"))
{
rs->dcdport.type.dcd = RIG_DCD_GPION;
rs->dcdport_deprecated.type.dcd = RIG_DCD_GPION;
}
else if (!strcmp(val, "None"))
{
rs->dcdport.type.dcd = RIG_DCD_NONE;
rs->dcdport_deprecated.type.dcd = RIG_DCD_NONE;
}
else
{
return -RIG_EINVAL;
}
break;
case TOK_DCD_PATHNAME:
strncpy(rs->dcdport.pathname, val, HAMLIB_FILPATHLEN - 1);
strncpy(rs->dcdport_deprecated.pathname, val, HAMLIB_FILPATHLEN - 1);
break;
case TOK_VFO_COMP:
rs->vfo_comp = atof(val);
break;
case TOK_POLL_INTERVAL:
rs->poll_interval = atof(val);
// Make sure cache times out before next poll cycle
rig_set_cache_timeout_ms(rig, HAMLIB_CACHE_ALL, atol(val));
break;
case TOK_LO_FREQ:
rs->lo_freq = atof(val);
break;
case TOK_CACHE_TIMEOUT:
rig_set_cache_timeout_ms(rig, HAMLIB_CACHE_ALL, atol(val));
break;
case TOK_AUTO_POWER_ON:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL; //value format error
}
rs->auto_power_on = val_i ? 1 : 0;
break;
case TOK_AUTO_POWER_OFF:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL; //value format error
}
rs->auto_power_off = val_i ? 1 : 0;
break;
case TOK_AUTO_DISABLE_SCREENSAVER:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL; //value format error
}
rs->auto_disable_screensaver = val_i ? 1 : 0;
break;
case TOK_DISABLE_YAESU_BANDSELECT:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL; //value format error
}
rs->disable_yaesu_bandselect = val_i ? 1 : 0;
break;
case TOK_PTT_SHARE:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL; //value format error
}
rs->ptt_share = val_i ? 1 : 0;
break;
case TOK_FLUSHX:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL; //value format error
}
rs->rigport.flushx = val_i ? 1 : 0;
break;
case TOK_TWIDDLE_TIMEOUT:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL; //value format error
}
rs->twiddle_timeout = val_i;
break;
case TOK_TWIDDLE_RIT:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL; //value format error
}
rs->twiddle_rit = val_i ? 1 : 0;
break;
case TOK_ASYNC:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL; //value format error
}
rs->async_data_enabled = val_i ? 1 : 0;
break;
case TOK_TUNER_CONTROL_PATHNAME:
rs->tuner_control_pathname = strdup(val); // yeah -- need to free it
break;
case TOK_TIMEOUT_RETRY:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL;
}
rs->rigport.timeout_retry = val_i;
break;
case TOK_OFFSET_VFOA:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL; //value format error
}
rs->offset_vfoa = val_i;
rig_debug(RIG_DEBUG_VERBOSE, "%s: offset_vfoa=%ld\n", __func__, val_i);
break;
case TOK_OFFSET_VFOB:
if (1 != sscanf(val, "%ld", &val_i))
{
return -RIG_EINVAL; //value format error
}
rs->offset_vfob = val_i;
rig_debug(RIG_DEBUG_VERBOSE, "%s: offset_vfob=%ld\n", __func__, val_i);
break;
default:
return -RIG_EINVAL;
}
return RIG_OK;
}
/*
* frontend_get_conf
* assumes rig!=NULL, val!=NULL
*/
static int frontend_get_conf2(RIG *rig, token_t token, char *val, int val_len)
{
struct rig_state *rs;
const char *s = "";
rs = &rig->state;
switch (token)
{
case TOK_PATHNAME:
SNPRINTF(val, val_len, "%s", rs->rigport.pathname);
break;
case TOK_WRITE_DELAY:
SNPRINTF(val, val_len, "%d", rs->rigport.write_delay);
break;
case TOK_POST_WRITE_DELAY:
SNPRINTF(val, val_len, "%d", rs->rigport.post_write_delay);
break;
case TOK_TIMEOUT:
SNPRINTF(val, val_len, "%d", rs->rigport.timeout);
break;
case TOK_RETRY:
SNPRINTF(val, val_len, "%d", rs->rigport.retry);
break;
#if 0 // needs to be replace?
case TOK_ITU_REGION:
SNPRINTF(val, val_len, "%d",
rs->itu_region == 1 ? RIG_ITU_REGION1 : RIG_ITU_REGION2);
break;
#endif
case TOK_SERIAL_SPEED:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
return -RIG_EINVAL;
}
SNPRINTF(val, val_len, "%d", rs->rigport.parm.serial.rate);
break;
case TOK_DATA_BITS:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
return -RIG_EINVAL;
}
SNPRINTF(val, val_len, "%d", rs->rigport.parm.serial.data_bits);
break;
case TOK_STOP_BITS:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
return -RIG_EINVAL;
}
SNPRINTF(val, val_len, "%d", rs->rigport.parm.serial.stop_bits);
break;
case TOK_PARITY:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
return -RIG_EINVAL;
}
switch (rs->rigport.parm.serial.parity)
{
case RIG_PARITY_NONE:
s = "None";
break;
case RIG_PARITY_ODD:
s = "Odd";
break;
case RIG_PARITY_EVEN:
s = "Even";
break;
case RIG_PARITY_MARK:
s = "Mark";
break;
case RIG_PARITY_SPACE:
s = "Space";
break;
default:
return -RIG_EINVAL;
}
strcpy(val, s);
break;
case TOK_HANDSHAKE:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
rig_debug(RIG_DEBUG_ERR,
"%s: getting handshake is invalid for non-serial port rig type\n",
__func__);
return -RIG_EINVAL;
}
switch (rs->rigport.parm.serial.handshake)
{
case RIG_HANDSHAKE_NONE:
s = "None";
break;
case RIG_HANDSHAKE_XONXOFF:
s = "XONXOFF";
break;
case RIG_HANDSHAKE_HARDWARE:
s = "Hardware";
break;
default:
return -RIG_EINVAL;
}
strcpy(val, s);
break;
case TOK_RTS_STATE:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
return -RIG_EINVAL;
}
switch (rs->rigport.parm.serial.rts_state)
{
case RIG_SIGNAL_UNSET:
s = "Unset";
break;
case RIG_SIGNAL_ON:
s = "ON";
break;
case RIG_SIGNAL_OFF:
s = "OFF";
break;
default:
return -RIG_EINVAL;
}
strcpy(val, s);
break;
case TOK_DTR_STATE:
if (rs->rigport.type.rig != RIG_PORT_SERIAL)
{
return -RIG_EINVAL;
}
switch (rs->rigport.parm.serial.dtr_state)
{
case RIG_SIGNAL_UNSET:
s = "Unset";
break;
case RIG_SIGNAL_ON:
s = "ON";
break;
case RIG_SIGNAL_OFF:
s = "OFF";
break;
default:
return -RIG_EINVAL;
}
strcpy(val, s);
break;
case TOK_VFO_COMP:
SNPRINTF(val, val_len, "%f", rs->vfo_comp);
break;
case TOK_POLL_INTERVAL:
SNPRINTF(val, val_len, "%d", rs->poll_interval);
break;
case TOK_PTT_TYPE:
switch (rs->pttport.type.ptt)
{
case RIG_PTT_RIG:
s = "RIG";
break;
case RIG_PTT_RIG_MICDATA:
s = "RIGMICDATA";
break;
case RIG_PTT_SERIAL_DTR:
s = "DTR";
break;
case RIG_PTT_SERIAL_RTS:
s = "RTS";
break;
case RIG_PTT_PARALLEL:
s = "Parallel";
break;
case RIG_PTT_CM108:
s = "CM108";
break;
case RIG_PTT_GPIO:
s = "GPIO";
break;
case RIG_PTT_GPION:
s = "GPION";
break;
case RIG_PTT_NONE:
s = "None";
break;
default:
return -RIG_EINVAL;
}
strcpy(val, s);
break;
case TOK_PTT_PATHNAME:
strcpy(val, rs->pttport.pathname);
break;
case TOK_PTT_BITNUM:
SNPRINTF(val, val_len, "%d", rs->pttport.parm.cm108.ptt_bitnum);
break;
case TOK_DCD_TYPE:
switch (rs->dcdport.type.dcd)
{
case RIG_DCD_RIG:
s = "RIG";
break;
case RIG_DCD_SERIAL_DSR:
s = "DSR";
break;
case RIG_DCD_SERIAL_CTS:
s = "CTS";
break;
case RIG_DCD_SERIAL_CAR:
s = "CD";
break;
case RIG_DCD_PARALLEL:
s = "Parallel";
break;
case RIG_DCD_CM108:
s = "CM108";
break;
case RIG_DCD_GPIO:
s = "GPIO";
break;
case RIG_DCD_GPION:
s = "GPION";
break;
case RIG_DCD_NONE:
s = "None";
break;
default:
return -RIG_EINVAL;
}
strcpy(val, s);
break;
case TOK_DCD_PATHNAME:
strcpy(val, rs->dcdport.pathname);
break;
case TOK_LO_FREQ:
SNPRINTF(val, val_len, "%g", rs->lo_freq);
break;
case TOK_CACHE_TIMEOUT:
SNPRINTF(val, val_len, "%d", rig_get_cache_timeout_ms(rig, HAMLIB_CACHE_ALL));
break;
case TOK_AUTO_POWER_ON:
SNPRINTF(val, val_len, "%d", rs->auto_power_on);
break;
case TOK_AUTO_POWER_OFF:
SNPRINTF(val, val_len, "%d", rs->auto_power_off);
break;
case TOK_AUTO_DISABLE_SCREENSAVER:
SNPRINTF(val, val_len, "%d", rs->auto_disable_screensaver);
break;
case TOK_PTT_SHARE:
SNPRINTF(val, val_len, "%d", rs->ptt_share);
break;
case TOK_FLUSHX:
SNPRINTF(val, val_len, "%d", rs->rigport.flushx);
break;
case TOK_DISABLE_YAESU_BANDSELECT:
SNPRINTF(val, val_len, "%d", rs->disable_yaesu_bandselect);
break;
case TOK_TWIDDLE_TIMEOUT:
SNPRINTF(val, val_len, "%d", rs->twiddle_timeout);
break;
case TOK_TWIDDLE_RIT:
SNPRINTF(val, val_len, "%d", rs->twiddle_rit);
break;
case TOK_ASYNC:
SNPRINTF(val, val_len, "%d", rs->async_data_enabled);
break;
case TOK_TIMEOUT_RETRY:
SNPRINTF(val, val_len, "%d", rs->rigport.timeout_retry);
break;
default:
return -RIG_EINVAL;
}
memcpy(&rs->rigport_deprecated, &rs->rigport, sizeof(hamlib_port_t_deprecated));
return RIG_OK;
}
/**
* \brief call a function against each configuration token of a rig
* \param rig The rig handle
* \param cfunc The function to perform on each token
* \param data Any data to be passed to cfunc()
*
* Executes \a cfunc() on all the elements stored in the conf table.
* rig_token_foreach starts first with backend conf table, then finish
* with frontend table.
*
* \return RIG_OK if the operation has been successful, otherwise
* a negative value if an error occurred (in which case, cause is
* set appropriately).
*/
int HAMLIB_API rig_token_foreach(RIG *rig,
int (*cfunc)(const struct confparams *,
rig_ptr_t),
rig_ptr_t data)
{
const struct confparams *cfp;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig || !rig->caps || !cfunc)
{
return -RIG_EINVAL;
}
for (cfp = frontend_cfg_params; cfp->name; cfp++)
{
if ((*cfunc)(cfp, data) == 0)
{
return RIG_OK;
}
}
if (rig->caps->port_type == RIG_PORT_SERIAL)
{
for (cfp = frontend_serial_cfg_params; cfp->name; cfp++)
{
if ((*cfunc)(cfp, data) == 0)
{
return RIG_OK;
}
}
}
for (cfp = rig->caps->cfgparams; cfp && cfp->name; cfp++)
{
if ((*cfunc)(cfp, data) == 0)
{
return RIG_OK;
}
}
for (cfp = rig->caps->extlevels; cfp && cfp->name; cfp ++)
{
if ((*cfunc)(cfp, data) == 0)
{
return RIG_OK;
}
}
return RIG_OK;
}
/**
* \brief lookup a confparam struct
* \param rig The rig handle
* \param name The name of the configuration parameter
*
* Lookup conf token by its name.
*
* \return a pointer to the confparams struct if found, otherwise NULL.
*/
const struct confparams *HAMLIB_API rig_confparam_lookup(RIG *rig,
const char *name)
{
const struct confparams *cfp;
token_t token;
rig_debug(RIG_DEBUG_VERBOSE, "%s called for %s\n", __func__, name);
if (!rig || !rig->caps)
{
return NULL;
}
/* 0 returned for invalid format */
token = strtol(name, NULL, 0);
for (cfp = rig->caps->cfgparams; cfp && cfp->name; cfp++)
{
if (!strcmp(cfp->name, name) || token == cfp->token)
{
return cfp;
}
}
for (cfp = frontend_cfg_params; cfp->name; cfp++)
{
if (!strcmp(cfp->name, name) || token == cfp->token)
{
return cfp;
}
}
if (rig->caps->port_type == RIG_PORT_SERIAL)
{
for (cfp = frontend_serial_cfg_params; cfp->name; cfp++)
{
if (!strcmp(cfp->name, name) || token == cfp->token)
{
return cfp;
}
}
}
return NULL;
}
/**
* \brief lookup a token id
* \param rig The rig handle
* \param name The name of the configuration parameter
*
* Simple lookup returning token id associated with name.
*
* \return the token id if found, otherwise RIG_CONF_END
*/
token_t HAMLIB_API rig_token_lookup(RIG *rig, const char *name)
{
const struct confparams *cfp;
rig_debug(RIG_DEBUG_VERBOSE, "%s called for %s\n", __func__, name);
cfp = rig_confparam_lookup(rig, name);
if (!cfp)
{
return RIG_CONF_END;
}
return cfp->token;
}
/**
* \brief set a radio configuration parameter
* \param rig The rig handle
* \param token The parameter
* \param val The value to set the parameter to
*
* Sets a configuration parameter.
*
* \return RIG_OK if the operation has been successful, otherwise
* a negative value if an error occurred (in which case, cause is
* set appropriately).
*
* \sa rig_get_conf()
*/
int HAMLIB_API rig_set_conf(RIG *rig, token_t token, const char *val)
{
struct rig_state *rs = &rig->state;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig || !rig->caps)
{
return -RIG_EINVAL;
}
// Some parameters can be ignored
if (token == TOK_HANDSHAKE && (rs->rigport.type.rig != RIG_PORT_SERIAL))
{
rig_debug(RIG_DEBUG_WARN,
"%s: handshake is not valid for non-serial port rig\n", __func__);
return RIG_OK; // this allows rigctld to continue and just print a warning instead of error
}
if (rig_need_debug(RIG_DEBUG_VERBOSE))
{
const struct confparams *cfp;
char tokenstr[12];
SNPRINTF(tokenstr, sizeof(tokenstr), "%ld", token);
cfp = rig_confparam_lookup(rig, tokenstr);
if (!cfp)
{
return -RIG_EINVAL;
}
rig_debug(RIG_DEBUG_VERBOSE, "%s: %s='%s'\n", __func__, cfp->name, val);
}
if (IS_TOKEN_FRONTEND(token))
{
return frontend_set_conf(rig, token, val);
}
if (rig->caps->set_conf == NULL)
{
return -RIG_ENAVAIL;
}
return rig->caps->set_conf(rig, token, val);
}
/**
* \brief get the value of a configuration parameter
* \param rig The rig handle
* \param token The parameter
* \param val The location where to store the value of config \a token
*
* Retrieves the value of a configuration parameter associated with \a token.
* The location pointed to by val must be large enough to hold the value of the config.
*
* \return RIG_OK if the operation has been successful, otherwise
* a negative value if an error occurred (in which case, cause is
* set appropriately).
*
* \sa rig_set_conf()
*/
int HAMLIB_API rig_get_conf(RIG *rig, token_t token, char *val)
{
return rig_get_conf2(rig, token, val, 128);
}
int HAMLIB_API rig_get_conf2(RIG *rig, token_t token, char *val, int val_len)
{
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig || !rig->caps || !val)
{
return -RIG_EINVAL;
}
if (IS_TOKEN_FRONTEND(token))
{
return frontend_get_conf2(rig, token, val, val_len);
}
if (rig->caps->get_conf2)
{
return rig->caps->get_conf2(rig, token, val, val_len);
}
if (rig->caps->get_conf == NULL)
{
return -RIG_ENAVAIL;
}
return rig->caps->get_conf(rig, token, val);
}
/*! @} */
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik