Hamlib/drake/r8b.c

142 wiersze
3.6 KiB
C

/*
* Hamlib Drake backend - R-8B description
* Copyright (c) 2001-2003 by Stephane Fillod
*
* $Id: r8b.c,v 1.4 2003-10-01 19:31:55 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "drake.h"
#define R8B_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_AM|RIG_MODE_FM)
#define R8B_FUNC (RIG_FUNC_NONE)
#define R8B_LEVEL_ALL (RIG_LEVEL_NONE)
#define R8B_PARM_ALL (RIG_PARM_NONE)
#define R8B_VFO (RIG_VFO_A|RIG_VFO_B)
#define R8B_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN|RIG_OP_CPY)
/*
* R-8B rig capabilities.
*
* manual: http://www.rldrake.com/swl/R8B.pdf
*
*/
const struct rig_caps r8b_caps = {
.rig_model = RIG_MODEL_DKR8B,
.model_name = "R-8B",
.mfg_name = "Drake",
.version = "0.1",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED, /* and only basic support */
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600,
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 1,
.timeout = 200,
.retry = 3,
.has_get_func = R8B_FUNC,
.has_set_func = R8B_FUNC,
.has_get_level = R8B_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(R8B_LEVEL_ALL),
.has_get_parm = R8B_PARM_ALL,
.has_set_parm = RIG_PARM_SET(R8B_PARM_ALL),
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END },
.attenuator = { 10, RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF, /* TODO: acutally has RIG_TRN_RIG */
.bank_qty = 0,
.chan_desc_sz = 7,
.vfo_ops = R8B_VFO_OPS,
.chan_list = {
RIG_CHAN_END, /* FIXME */
},
.rx_range_list1 = {
{kHz(10),MHz(30),R8B_MODES,-1,-1,R8B_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(10),MHz(30),R8B_MODES,-1,-1,R8B_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{R8B_MODES,10},
{R8B_MODES,100},
{R8B_MODES,kHz(1)},
{R8B_MODES,kHz(10)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_AM, kHz(2.3)}, /* normal */
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_AM, kHz(6)}, /* wide */
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_AM, kHz(4)},
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_AM, kHz(1.8)}, /* narrow */
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_AM, Hz(500)},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.priv = NULL,
.set_freq = drake_set_freq,
.set_vfo = drake_set_vfo,
.set_mode = drake_set_mode,
.get_info = drake_get_info,
};
/*
* Function definitions below
*/