Hamlib/uniden/bcd396t.c

135 wiersze
3.7 KiB
C

/*
* Hamlib Uniden backend - BCD396T description
* Copyright (c) 2001-2008 by Stephane Fillod
*
* $Id: bcd396t.c,v 1.2 2008-10-18 06:21:31 roger-linux Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
/*#include "uniden.h"*/
#include "uniden_digital.h"
/* TODO: All these defines have to be filled in properly */
#define BCD396T_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)
#define BCD396T_FUNC (RIG_FUNC_MUTE)
#define BCD396T_LEVEL_ALL (RIG_LEVEL_ATT)
#define BCD396T_PARM_ALL (RIG_PARM_BEEP|RIG_PARM_BACKLIGHT)
#define BCD396T_VFO (RIG_VFO_A|RIG_VFO_B)
#define BCD396T_CHANNEL_CAPS \
.freq=1,\
.flags=1, /* L/O */
/*
* bcd396t rig capabilities.
*
* TODO: check this with manual or web site.
*/
const struct rig_caps bcd396t_caps = {
.rig_model = RIG_MODEL_BCD396T,
.model_name = "BCD-396T",
.mfg_name = "Uniden",
.version = BACKEND_DIGITAL_VER,
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_TRUNKSCANNER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600,
.serial_rate_max = 115200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 1,
.timeout = 2000,
.retry = 3,
.has_get_func = BCD396T_FUNC,
.has_set_func = BCD396T_FUNC,
.has_get_level = BCD396T_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(BCD396T_LEVEL_ALL),
.has_get_parm = BCD396T_PARM_ALL,
.has_set_parm = RIG_PARM_SET(BCD396T_PARM_ALL),
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = NULL, /* FIXME: CTCSS list? */
.dcs_list = NULL,
.preamp = { RIG_DBLST_END },
.attenuator = { RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 0, 5999, RIG_MTYPE_MEM, {BCD396T_CHANNEL_CAPS} }, /* Really 6000 channels? */
RIG_CHAN_END,
},
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{MHz(25),MHz(512),BCD396T_MODES,-1,-1,BCD396T_VFO},
{MHz(764),MHz(775.9875),BCD396T_MODES,-1,-1,BCD396T_VFO},
{MHz(794),MHz(823.9875),BCD396T_MODES,-1,-1,BCD396T_VFO},
{MHz(849.0125),MHz(868.9875),BCD396T_MODES,-1,-1,BCD396T_VFO},
{MHz(894.0125),MHz(956),BCD396T_MODES,-1,-1,BCD396T_VFO},
{MHz(1240),MHz(1300),BCD396T_MODES,-1,-1,BCD396T_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{BCD396T_MODES,10}, /* FIXME: add other ts */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_AM|RIG_MODE_FM, kHz(8)},
{RIG_MODE_WFM, kHz(230)},
RIG_FLT_END,
},
.get_info = uniden_digital_get_info,
.set_freq = uniden_digital_set_freq,
.get_freq = uniden_digital_get_freq,
};
/*
* Function definitions below
*/