Hamlib/kenwood/k2.c

177 wiersze
5.0 KiB
C

/*
* Hamlib Kenwood backend - Elecraft K2 description
* Copyright (c) 2002-2004 by Stephane Fillod
*
* $Id: k2.c,v 1.6 2009-01-28 23:30:46 azummo Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "kenwood.h"
#define K2_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)
#define K2_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_LOCK)
#define K2_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_SQL|RIG_LEVEL_STRENGTH|RIG_LEVEL_RFPOWER)
#define K2_VFO (RIG_VFO_A|RIG_VFO_B)
#define K2_VFO_OP (RIG_OP_UP|RIG_OP_DOWN)
static struct kenwood_priv_caps k2_priv_caps = {
.cmdtrm = EOM_KEN,
};
/*
* KIO2 rig capabilities.
* This kit can recognize a large subset of TS-570 commands.
*
* part of infos comes from http://www.elecraft.com
*
* TODO: 2 antenna support, CW, etc.
*/
const struct rig_caps k2_caps = {
.rig_model = RIG_MODEL_K2,
.model_name = "K2",
.mfg_name = "Elecraft",
.version = BACKEND_VER,
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 100,
.retry = 3,
.has_get_func = K2_FUNC_ALL,
.has_set_func = K2_FUNC_ALL,
.has_get_level = K2_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(K2_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.preamp = { 14, 4, RIG_DBLST_END, },
.attenuator = { 10, RIG_DBLST_END, },
.max_rit = Hz(9990),
.max_xit = Hz(9990),
.max_ifshift = Hz(0),
.vfo_ops = K2_VFO_OP,
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 0, 89, RIG_MTYPE_MEM },
{ 90, 99, RIG_MTYPE_EDGE },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(500),MHz(30),K2_MODES,-1,-1,K2_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list1 = {
{kHz(1810),kHz(1850)-1,K2_MODES,10,W(15),K2_VFO}, /* 15W class */
{kHz(3500),kHz(3800)-1,K2_MODES,10,W(15),K2_VFO},
{MHz(7),kHz(7100),K2_MODES,10,W(15),K2_VFO},
{kHz(10100),kHz(10150),K2_MODES,10,W(15),K2_VFO},
{MHz(14),kHz(14350),K2_MODES,10,W(15),K2_VFO},
{kHz(18068),kHz(18168),K2_MODES,10,W(15),K2_VFO},
{MHz(21),kHz(21450),K2_MODES,10,W(15),K2_VFO},
{kHz(24890),kHz(24990),K2_MODES,10,W(15),K2_VFO},
{MHz(28),kHz(29700),K2_MODES,10,W(15),K2_VFO},
RIG_FRNG_END,
}, /* tx range */
.rx_range_list2 = {
{kHz(500),MHz(30),K2_MODES,-1,-1,K2_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = {
{kHz(1800),MHz(2)-1,K2_MODES,10,W(15),K2_VFO}, /* 15W class */
{kHz(3500),MHz(4)-1,K2_MODES,10,W(15),K2_VFO},
{MHz(7),kHz(7300),K2_MODES,10,W(15),K2_VFO},
{kHz(10100),kHz(10150),K2_MODES,10,W(15),K2_VFO},
{MHz(14),kHz(14350),K2_MODES,10,W(15),K2_VFO},
{kHz(18068),kHz(18168),K2_MODES,10,W(15),K2_VFO},
{MHz(21),kHz(21450),K2_MODES,10,W(15),K2_VFO},
{kHz(24890),kHz(24990),K2_MODES,10,W(15),K2_VFO},
{MHz(28),kHz(29700),K2_MODES,10,W(15),K2_VFO},
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = {
{K2_MODES,10},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB, kHz(2.5)},
{RIG_MODE_CW, Hz(500)},
{RIG_MODE_RTTY, Hz(500)},
RIG_FLT_END,
},
.priv = (void *)&k2_priv_caps,
.rig_init = kenwood_init,
.rig_cleanup = kenwood_cleanup,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode,
.set_vfo = kenwood_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_xit = kenwood_set_xit,
.get_xit = kenwood_get_xit,
.get_ptt = kenwood_get_ptt,
.set_ptt = kenwood_set_ptt,
.get_dcd = kenwood_get_dcd,
.set_func = kenwood_set_func,
.get_func = kenwood_get_func,
.set_level = kenwood_set_level,
.get_level = kenwood_get_level,
.vfo_op = kenwood_vfo_op,
.set_trn = kenwood_set_trn,
.get_trn = kenwood_get_trn,
.get_powerstat = kenwood_get_powerstat,
};
/*
* Function definitions below
*/