Hamlib/icom/ic910.c

330 wiersze
10 KiB
C

/*
* Hamlib CI-V backend - description of IC-910 (VHF/UHF All-Mode Tranceiver)
* Contributed by Francois Retief <fgretief@sun.ac.za>
* Copyright (c) 2000-2002 by Stephane Fillod
*
* $Id: ic910.c,v 1.7 2002-11-04 22:40:54 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <hamlib/rig.h>
#include "icom.h"
/*
* It seems some IC910 out there have weird firmware. Uncomment the following
* if your modes are wrong, and please report to hamlib-developer maillist
* with firmware number. That'd be interesting to have a word from Icom
* on this subject, and if firmware updates are possible.
*/
#ifdef HAVE_WEIRD_IC910_MODES
static int ic910_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
/* FIX: The IC-910 has "Set FM" = 4, which is RTTY in for other radios */
if (mode == RIG_MODE_FM) {
mode = RIG_MODE_RTTY;
}
return icom_set_mode(rig, vfo, mode, width);
}
static int ic910_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
{
/* FIX: The IC-910 has "Set FM" = 4, which is RTTY in for other radios */
int retval = icom_get_mode(rig, vfo, mode, width);
if (*mode == RIG_MODE_RTTY) {
*mode = RIG_MODE_FM;
}
return retval;
}
#endif /* HAVE_WEIRD_IC910_MODES */
/* this function compares 2 frequencies
* returns 1 if they are in the same band
* returns 0 if they are in different bands
*/
static int compareFrequencies (RIG* rig, freq_t freq1, freq_t freq2) {
int freq1band=0, freq2band=0;
freq_range_t noband = RIG_FRNG_END;
while (rig->caps->rx_range_list1[freq1band].start!=noband.start) {
if (freq1 >= rig->caps->rx_range_list1[freq1band].start &&
freq1 <= rig->caps->rx_range_list1[freq1band].end)
break;
++freq1band;
//fprintf(stderr, "%i\n", freq1band);
}
while (rig->caps->rx_range_list1[freq2band].start!=noband.start) {
if (freq2 >= rig->caps->rx_range_list1[freq2band].start &&
freq2 <= rig->caps->rx_range_list1[freq2band].end)
break;
++freq2band;
}
if (freq2band == freq1band) return 1;
else return 0;
}
/* swaps main and sub band - but preserves PREAMP, MODE
* they are also exchanged, but we do not want that
*/
static int icom_swap_bands(RIG* rig) {
/* TODO: actually use retval! */
int retval=0;
rmode_t mmode, smode; /* used to store the mode */
pbwidth_t mwidth, swidth; /* used to store the width */
value_t mpreamp, spreamp; /* used to store preamp */
value_t matt, satt; /* used to store attenuation */
/* main band get values */
icom_set_vfo(rig, RIG_VFO_MAIN);
/* get the mode, width, preamp */
icom_get_mode(rig, RIG_VFO_CURR, &mmode, &mwidth);
icom_get_level(rig, RIG_VFO_CURR, RIG_LEVEL_PREAMP, &mpreamp);
icom_get_level(rig, RIG_VFO_CURR, RIG_LEVEL_ATT, &matt);
/* sub band get values */
icom_set_vfo(rig, RIG_VFO_SUB);
/* get the mode, width, preamp, att */
icom_get_mode(rig, RIG_VFO_CURR, &smode, &swidth);
icom_get_level(rig, RIG_VFO_CURR, RIG_LEVEL_PREAMP, &spreamp);
icom_get_level(rig, RIG_VFO_CURR, RIG_LEVEL_ATT, &satt);
/* now, we can exchange the bands */
icom_vfo_op(rig, RIG_VFO_CURR, RIG_OP_XCHG);
/* restore the sub vales NOTE: sub band is still active */
/* set the mode, width, preamp */
icom_set_mode(rig, RIG_VFO_CURR, smode, swidth);
icom_set_level(rig, RIG_VFO_CURR, RIG_LEVEL_PREAMP, spreamp);
icom_set_level(rig, RIG_VFO_CURR, RIG_LEVEL_ATT, satt);
/* restore main band values */
icom_set_vfo(rig, RIG_VFO_MAIN);
/* set the mode, width, preamp */
icom_set_mode(rig, RIG_VFO_CURR, mmode, mwidth);
icom_set_level(rig, RIG_VFO_CURR, RIG_LEVEL_PREAMP, mpreamp);
icom_set_level(rig, RIG_VFO_CURR, RIG_LEVEL_ATT, matt);
return retval;
}
static int ic910_set_freq(RIG* rig, vfo_t vfo, freq_t freq)
{
int retval;
freq_t otherfreq;
/* get the freq of the other band */
if (vfo==RIG_VFO_MAIN)
icom_set_vfo(rig, RIG_VFO_SUB);
else
icom_set_vfo(rig, RIG_VFO_MAIN);
retval=icom_get_freq(rig, RIG_VFO_CURR, &otherfreq);
if (retval!=RIG_OK) return retval;
if (compareFrequencies(rig, freq, otherfreq))
icom_swap_bands(rig);
icom_set_vfo(rig, vfo);
return icom_set_freq(rig, RIG_VFO_CURR, freq);
}
#define IC910_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_FM)
#define IC910_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_FM)
#define IC910_VFO_ALL (RIG_VFO_A|RIG_VFO_C)
#define IC910_SCAN_OPS (RIG_SCAN_MEM)
#define IC910_VFO_OPS (RIG_OP_FROM_VFO| \
RIG_OP_TO_VFO| \
RIG_OP_CPY| \
RIG_OP_MCL| \
RIG_OP_XCHG)
#define IC910_FUNC_ALL (RIG_FUNC_FAGC| \
RIG_FUNC_NB| \
RIG_FUNC_NR| \
RIG_FUNC_ANF| \
RIG_FUNC_TONE| \
RIG_FUNC_TSQL| \
RIG_FUNC_COMP| \
RIG_FUNC_VOX| \
RIG_FUNC_FBKIN| \
RIG_FUNC_AFC| \
RIG_FUNC_SATMODE| \
RIG_FUNC_SCOPE)
#define IC910_LEVEL_ALL (RIG_LEVEL_AF| \
RIG_LEVEL_RF| \
RIG_LEVEL_SQL| \
RIG_LEVEL_IF| \
RIG_LEVEL_NR| \
RIG_LEVEL_CWPITCH| \
RIG_LEVEL_RFPOWER| \
RIG_LEVEL_MICGAIN| \
RIG_LEVEL_KEYSPD| \
RIG_LEVEL_COMP| \
RIG_LEVEL_VOXGAIN| \
RIG_LEVEL_VOXDELAY| \
RIG_LEVEL_ANTIVOX| \
RIG_LEVEL_ATT| \
RIG_LEVEL_PREAMP)
#define IC910_STR_CAL { 0, { } }
/*
*/
static const struct icom_priv_caps ic910_priv_caps = {
0x60, /* default address */
0, /* 731 mode */
ic910_ts_sc_list,
IC910_STR_CAL
};
const struct rig_caps ic910_caps = {
.rig_model = RIG_MODEL_IC910,
.model_name = "IC-910",
.mfg_name = "Icom",
.version = "0.1",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = IC910_FUNC_ALL,
.has_set_func = IC910_FUNC_ALL | RIG_FUNC_RESUME,
.has_get_level = IC910_LEVEL_ALL | (RIG_LEVEL_SQLSTAT|RIG_LEVEL_STRENGTH),
.has_set_level = IC910_LEVEL_ALL,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = {20, RIG_DBLST_END, },
.attenuator = {20, RIG_DBLST_END, },
.max_rit = Hz(0), /* SSB,CW: +-1.0kHz FM: +-5.0kHz */
.max_xit = Hz(0),
.max_ifshift = Hz(0), /* 1.2kHz manual knob */
.targetable_vfo = 0,
.vfo_ops = IC910_VFO_OPS,
.scan_ops = IC910_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM },
{ 100, 105, RIG_MTYPE_EDGE },
{ 106, 106, RIG_MTYPE_CALL },
RIG_CHAN_END, },
.rx_range_list1 = { /* USA */
{MHz(144),MHz(148),IC910_MODES,-1,-1,IC910_VFO_ALL},
{MHz(430),MHz(450),IC910_MODES,-1,-1,IC910_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list1 = {
{MHz(144),MHz(148),IC910_MODES,W(5),W(100),IC910_VFO_ALL},
{MHz(430),MHz(450),IC910_MODES,W(5),W(75),IC910_VFO_ALL},
RIG_FRNG_END, },
.rx_range_list2 = { /* Europe */
{MHz(144),MHz(146),IC910_MODES,-1,-1,IC910_VFO_ALL},
{MHz(430),MHz(440),IC910_MODES,-1,-1,IC910_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list2 = {
{MHz(144),MHz(146),IC910_MODES,W(5),W(100),IC910_VFO_ALL},
{MHz(430),MHz(440),IC910_MODES,W(5),W(75),IC910_VFO_ALL},
RIG_FRNG_END, },
.tuning_steps = {
{RIG_MODE_SSB|RIG_MODE_CW,1},
{RIG_MODE_SSB|RIG_MODE_CW,10},
{RIG_MODE_SSB|RIG_MODE_CW,50},
{RIG_MODE_SSB|RIG_MODE_CW,100},
{RIG_MODE_FM,kHz(0.1)},
{RIG_MODE_FM,kHz(5)},
{RIG_MODE_FM,kHz(6.25)},
{RIG_MODE_FM,kHz(10)},
{RIG_MODE_FM,kHz(12.5)},
{RIG_MODE_FM,kHz(20)},
{RIG_MODE_FM,kHz(25)},
{RIG_MODE_FM,kHz(100)},
RIG_TS_END, },
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_CW|RIG_MODE_SSB, kHz(2.3)}, /* buildin */
{RIG_MODE_FM, kHz(15)}, /* buildin */
RIG_FLT_END, },
.priv = (void*)&ic910_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.get_freq = icom_get_freq,
.set_freq = ic910_set_freq,
#ifdef HAVE_WEIRD_IC910_MODES
.get_mode = ic910_get_mode,
.set_mode = ic910_set_mode,
#else
.get_mode = icom_get_mode,
.set_mode = icom_set_mode,
#endif
.get_vfo = NULL,
.set_vfo = icom_set_vfo,
.get_ts = icom_get_ts,
.set_ts = icom_set_ts,
.get_func = icom_get_func,
.set_func = icom_set_func,
.get_level = icom_get_level,
.set_level = icom_set_level,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.decode_event = icom_decode_event,
};
/* end of file */