Hamlib/rigs/pcr/pcr2500.c

200 wiersze
6.1 KiB
C

/*
* Hamlib PCR backend - PCR-2500 description
* Copyright (c) 2001-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "pcr.h"
#include "idx_builtin.h"
#define PCR2500_MODES_WIDE ( RIG_MODE_AM | RIG_MODE_FM | RIG_MODE_WFM )
#define PCR2500_MODES_NAR ( RIG_MODE_CW | RIG_MODE_SSB )
#define PCR2500_MODES ( PCR2500_MODES_NAR | PCR2500_MODES_WIDE )
#define PCR2500_FUNC ( RIG_FUNC_NB | RIG_FUNC_TSQL | RIG_FUNC_NB | \
RIG_FUNC_ANF | RIG_FUNC_NR | RIG_FUNC_AFC )
#define PCR2500_LEVEL ( \
RIG_LEVEL_ATT | RIG_LEVEL_AF | RIG_LEVEL_SQL | RIG_LEVEL_IF | \
RIG_LEVEL_AGC | RIG_LEVEL_STRENGTH | RIG_LEVEL_RAWSTR | \
RIG_LEVEL_NR )
static const struct confparams pcr2500_ext_levels[] =
{
{
TOK_EL_DIVERSITY, "DIV", "Diversity", "Antenna/tuner diversity",
NULL, RIG_CONF_CHECKBUTTON
},
{ RIG_CONF_END, NULL, }
};
static const struct pcr_priv_caps pcr2500_priv =
{
.reply_size = 6,
.reply_offset = 0,
.always_sync = 0,
};
/*
* IC PCR2500 rigs capabilities.
*/
const struct rig_caps pcr2500_caps =
{
RIG_MODEL(RIG_MODEL_PCR2500),
.model_name = "IC-PCR2500",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_PCRECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600, /* lower speeds gave troubles */
.serial_rate_max = 38400,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 400,
.retry = 3,
.has_get_func = PCR2500_FUNC,
.has_set_func = PCR2500_FUNC,
.has_get_level = PCR2500_LEVEL,
.has_set_level = RIG_LEVEL_SET(PCR2500_LEVEL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
// cppcheck-suppress *
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
/* XXX check this */
[LVL_IF] = { .min = { .i = -1270 }, .max = { .i = 1270 }, .step = { .i = 10 } },
},
.parm_gran = {},
.ctcss_list = pcr_ctcss_list,
.dcs_list = pcr_dcs_list,
.preamp = { RIG_DBLST_END },
.attenuator = { 20, RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = kHz(1.2),
.targetable_vfo = RIG_TARGETABLE_ALL,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = { RIG_CHAN_END },
.rx_range_list1 = {
{ kHz(100), GHz(1.3), PCR2500_MODES_NAR, -1, -1, RIG_VFO_MAIN, RIG_ANT_1 },
{ kHz(10), GHz(3.3) - kHz(1), PCR2500_MODES_WIDE, -1, -1, RIG_VFO_MAIN, RIG_ANT_1 },
{ MHz(50), GHz(1.3), PCR2500_MODES_WIDE, -1, -1, RIG_VFO_SUB, RIG_ANT_2 },
RIG_FRNG_END
},
.tx_range_list1 = { RIG_FRNG_END },
.rx_range_list2 = {
{ kHz(495), MHz(824) - 10, PCR2500_MODES_NAR, -1, -1, RIG_VFO_MAIN, RIG_ANT_1 },
{ MHz(849) + 10, MHz(869) - 10, PCR2500_MODES_NAR, -1, -1, RIG_VFO_MAIN, RIG_ANT_1 },
{ MHz(894) + 10, GHz(1.3), PCR2500_MODES_NAR, -1, -1, RIG_VFO_MAIN, RIG_ANT_1 },
{ kHz(10), MHz(824) - 10, PCR2500_MODES_WIDE, -1, -1, RIG_VFO_MAIN, RIG_ANT_1 },
{ MHz(849) + 10, MHz(869) - 10, PCR2500_MODES_WIDE, -1, -1, RIG_VFO_MAIN, RIG_ANT_1 },
{ MHz(894) + 10, GHz(3.3) - kHz(1), PCR2500_MODES_WIDE, -1, -1, RIG_VFO_MAIN, RIG_ANT_1 },
{ MHz(50), GHz(1.3), PCR2500_MODES_WIDE, -1, -1, RIG_VFO_SUB, RIG_ANT_2 },
RIG_FRNG_END
},
.tx_range_list2 = { RIG_FRNG_END }, /* no TX ranges, this is a receiver */
.tuning_steps = {
{ PCR2500_MODES, Hz(1) },
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{ RIG_MODE_FM | RIG_MODE_AM, kHz(15) },
{ RIG_MODE_CW | RIG_MODE_USB | RIG_MODE_LSB | RIG_MODE_AM, kHz(2.8)},
{ RIG_MODE_CW | RIG_MODE_USB | RIG_MODE_LSB | RIG_MODE_AM | RIG_MODE_FM, kHz(6) },
{ RIG_MODE_WFM, kHz(230) },
{ RIG_MODE_WFM | RIG_MODE_FM | RIG_MODE_AM, kHz(50) },
RIG_FLT_END,
},
.extlevels = pcr2500_ext_levels,
.priv = (void *)& pcr2500_priv,
/* XXX fake */
.str_cal = { 3, { { 0, -60 }, { 127, 0 }, { 255, 60 } } },
.rig_init = pcr_init,
.rig_cleanup = pcr_cleanup,
.rig_open = pcr_open,
.rig_close = pcr_close,
.set_vfo = pcr_set_vfo,
.get_vfo = pcr_get_vfo,
.set_freq = pcr_set_freq,
.get_freq = pcr_get_freq,
.set_mode = pcr_set_mode,
.get_mode = pcr_get_mode,
.get_info = pcr_get_info,
.set_level = pcr_set_level,
.get_level = pcr_get_level,
.set_ext_level = pcr_set_ext_level,
.set_func = pcr_set_func,
.get_func = pcr_get_func,
.set_ctcss_sql = pcr_set_ctcss_sql,
.get_ctcss_sql = pcr_get_ctcss_sql,
.set_dcs_sql = pcr_set_dcs_sql,
.get_dcs_sql = pcr_get_dcs_sql,
.set_trn = pcr_set_trn,
.decode_event = pcr_decode_event,
.get_dcd = pcr_get_dcd,
.set_powerstat = pcr_set_powerstat,
.get_powerstat = pcr_get_powerstat,
};