Hamlib/icom/id1.c

194 wiersze
4.8 KiB
C

/*
* Hamlib CI-V backend - description of ID-1 and variations
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "idx_builtin.h"
#include "icom.h"
#define ID1_MODES (RIG_MODE_FM /* |RIG_MODE_DIGVOICE|RIG_MODE_DIGDATA*/ )
#define ID1_FUNC_ALL (RIG_FUNC_MUTE|RIG_FUNC_MON|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_LOCK|RIG_FUNC_AFC)
#define ID1_LEVEL_ALL (RIG_LEVEL_AF|RIG_LEVEL_SQL|RIG_LEVEL_RFPOWER|RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_RAWSTR)
#define ID1_PARM_ALL (RIG_PARM_BEEP|RIG_PARM_BACKLIGHT /* |RIG_PARM_FAN */)
#define ID1_VFO_ALL (RIG_VFO_A|RIG_VFO_MEM)
#define ID1_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define ID1_SCAN_OPS (RIG_SCAN_VFO|RIG_SCAN_MEM)
/*
* FIXME: real measurement
*/
#define ID1_STR_CAL UNKNOWN_IC_STR_CAL
const struct ts_sc_list id1_ts_sc_list[] = {
{ kHz(5), 0x00 },
{ kHz(10), 0x01 },
{ 12500, 0x02 },
{ kHz(20), 0x03 },
{ kHz(25), 0x04 },
{ kHz(50), 0x05 },
{ kHz(100), 0x06 },
{ kHz(6.25), 0x07 },
{ 0, 0 },
};
/*
*/
static const struct icom_priv_caps id1_priv_caps = {
0x01, /* default address */
0, /* 731 mode */
id1_ts_sc_list
};
const struct rig_caps id1_caps = {
.rig_model = RIG_MODEL_ICID1,
.model_name = "IC ID-1",
.mfg_name = "Icom",
.version = BACKEND_VER,
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_MOBILE,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 19200,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = ID1_FUNC_ALL,
.has_set_func = ID1_FUNC_ALL,
.has_get_level = ID1_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(ID1_LEVEL_ALL),
.has_get_parm = ID1_PARM_ALL,
.has_set_parm = ID1_PARM_ALL,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = full_dcs_list,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = ID1_VFO_OPS,
.scan_ops = ID1_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM },
{ 100, 101, RIG_MTYPE_EDGE }, /* two by two */
{ 102, 104, RIG_MTYPE_CALL },
RIG_CHAN_END,
},
.rx_range_list1 = {
{GHz(1.240),GHz(1.3),ID1_MODES,-1,-1,ID1_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list1 = {
{GHz(1.240),GHz(1.3),ID1_MODES,W(1),W(10),ID1_VFO_ALL},
RIG_FRNG_END, },
.rx_range_list2 = {
{GHz(1.240),GHz(1.3),ID1_MODES,-1,-1,ID1_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list2 = {
{GHz(1.240),GHz(1.3),ID1_MODES,W(1),W(10),ID1_VFO_ALL},
RIG_FRNG_END, },
.tuning_steps = {
{ID1_MODES,kHz(5)},
{ID1_MODES,kHz(10)},
{ID1_MODES,12500},
{ID1_MODES,kHz(20)},
{ID1_MODES,kHz(25)},
{ID1_MODES,kHz(25)},
{ID1_MODES,kHz(100)},
{ID1_MODES,kHz(6.25)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_FM, kHz(12)},
#if 0
{RIG_MODE_DIGVOICE, kHz(6)},
{RIG_MODE_DIGDATA, kHz(140)},
#endif
RIG_FLT_END,
},
.str_cal = ID1_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&id1_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ptt = icom_set_ptt,
.get_ptt = icom_get_ptt,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.set_rptr_shift = icom_set_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
};