mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/tests/testrig.c

512 wiersze
13 KiB
C
Czysty Wina Historia

/*
* Hamlib sample program
*/
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <stdlib.h>
#include <hamlib/rig.h>
#include <hamlib/config.h>
#define SERIAL_PORT "/dev/pts/4"
int main(int argc, char *argv[])
{
RIG *my_rig; /* handle to rig (nstance) */
freq_t freq; /* frequency */
rmode_t rmode; /* radio mode of operation */
pbwidth_t width;
vfo_t vfo; /* vfo selection */
int strength; /* S-Meter level */
int rit = 0; /* RIT status */
int xit = 0; /* XIT status */
int retcode; /* generic return code from functions */
rig_model_t myrig_model;
printf("testrig: Hello, I am your main() !\n");
/* Turn off backend debugging output */
rig_set_debug_level(RIG_DEBUG_NONE);
/*
* allocate memory, setup & open port
*/
if (argc < 2)
{
hamlib_port_t myport;
/* may be overridden by backend probe */
myport.type.rig = RIG_PORT_SERIAL;
myport.parm.serial.rate = 9600;
myport.parm.serial.data_bits = 8;
myport.parm.serial.stop_bits = 1;
myport.parm.serial.parity = RIG_PARITY_NONE;
myport.parm.serial.handshake = RIG_HANDSHAKE_NONE;
strncpy(myport.pathname, SERIAL_PORT, HAMLIB_FILPATHLEN - 1);
rig_load_all_backends();
myrig_model = rig_probe(&myport);
}
else
{
myrig_model = atoi(argv[1]);
}
my_rig = rig_init(myrig_model);
if (!my_rig)
{
fprintf(stderr, "Unknown rig num: %d\n", myrig_model);
fprintf(stderr, "Please check riglist.h\n");
exit(1); /* whoops! something went wrong (mem alloc?) */
}
//strncpy(my_rig->state.rigport.pathname, SERIAL_PORT, HAMLIB_FILPATHLEN - 1);
retcode = rig_open(my_rig);
if (retcode != RIG_OK)
{
printf("rig_open: error = %s\n", rigerror(retcode));
exit(2);
}
char val[256];
retcode = rig_get_conf2(my_rig, rig_token_lookup(my_rig, "write_delay"), val,
sizeof(val));
printf("write_delay=%s\n", val);
// printf("Port %s opened ok\n", SERIAL_PORT);
/*
* Below are examples of set/get routines.
* Must add checking of functionality map prior to command execution -- FS
*
*/
/*
* Example of setting rig paameters
* and some error checking on the return code.
*/
retcode = rig_set_vfo(my_rig, RIG_VFO_B);
if (retcode != RIG_OK)
{
printf("rig_set_vfo: error = %s \n", rigerror(retcode));
}
/*
* Lets try some frequencies and modes. Return code is not checked.
* Examples of checking return code are further down.
*
*/
/* 10m FM Narrow */
printf("\nSetting 10m FM Narrow...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 29620000); /* 10m */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig, RIG_VFO_CURR, RIG_MODE_FM,
rig_passband_narrow(my_rig, RIG_MODE_FM));
if (retcode != RIG_OK)
{
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.6f MHz, Mode: %s, Passband: %.3f kHz\n\n",
freq / 1000000,
rig_strrmode(rmode),
width / 1000.0);
if (freq != 29620000)
{
printf("rig_set_freq: error exptect %.0f got %.0f\n", 296290000.0, freq);
}
if (rmode != RIG_MODE_FM || width != rig_passband_narrow(my_rig, RIG_MODE_FM))
{
printf("rig_set_mode: error expected FM/%d, got %s/%d\n",
(int)rig_passband_narrow(my_rig, RIG_MODE_FM), rig_strrmode(rmode), (int)width);
}
sleep(1); /* so you can see it -- FS */
/* 15m USB */
printf("Setting 15m USB...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 21235175); /* 15m */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_USB,
rig_passband_normal(my_rig, RIG_MODE_USB));
if (retcode != RIG_OK)
{
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.6f MHz, Mode: %s, Passband: %.3f kHz\n\n",
freq / 1000000, rig_strrmode(rmode), width / 1000.0);
sleep(1);
/* 40m LSB */
printf("Setting 40m LSB...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 7250100); /* 40m */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_LSB,
RIG_PASSBAND_NORMAL);
if (retcode != RIG_OK)
{
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.6f MHz, Mode: %s, Passband: %.3f kHz\n\n",
freq / 1000000,
rig_strrmode(rmode),
width / 1000.0);
sleep(1);
/* 80m AM Narrow */
printf("Setting 80m AM Narrow...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 3885000); /* 80m */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_AM,
rig_passband_narrow(my_rig, RIG_MODE_AM));
if (retcode != RIG_OK)
{
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.6f MHz, Mode: %s, Passband: %.3f kHz\n\n",
freq / 1000000,
rig_strrmode(rmode),
width / 1000.0);
sleep(1);
/* 160m CW Normal */
printf("Setting 160m CW...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 1875000); /* 160m */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_CW,
RIG_PASSBAND_NORMAL);
if (retcode != RIG_OK)
{
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.3f kHz, Mode: %s, Passband: %li Hz\n\n",
freq / 1000,
rig_strrmode(rmode),
width);
sleep(1);
/* 160m CW Narrow -- The band is noisy tonight -- FS*/
printf("Setting 160m CW Narrow...\n");
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_CW,
rig_passband_narrow(my_rig, RIG_MODE_CW));
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.3f kHz, Mode: %s, Passband: %li Hz\n\n",
freq / 1000,
rig_strrmode(rmode),
width);
sleep(1);
/* AM Broadcast band */
printf("Setting Medium Wave AM...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 770000); /* KAAM */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_AM,
RIG_PASSBAND_NORMAL);
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
printf(" Freq: %.3f kHz, Mode: %s, Passband: %.3f kHz\n\n",
freq / 1000,
rig_strrmode(rmode),
width / 1000.0);
sleep(1);
/* 20m USB on VFO_A */
printf("Setting 20m on VFO A with two functions...\n");
retcode = rig_set_vfo(my_rig, RIG_VFO_A);
if (retcode != RIG_OK)
{
printf("rig_set_vfo: error = %s \n", rigerror(retcode));
}
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 14250375); /* cq de vk3fcs */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_vfo(my_rig, &vfo);
printf(" Freq: %.6f MHz, VFO: %s\n\n", freq / 1000000, rig_strvfo(vfo));
sleep(1);
/* 20m USB on VFO_A , with only 1 call */
printf("Setting 20m on VFO A with one function...\n");
retcode = rig_set_freq(my_rig, RIG_VFO_A, 14295125); /* cq de vk3fcs */
if (retcode != RIG_OK)
{
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
rig_get_vfo(my_rig, &vfo);
printf(" Freq: %.6f MHz, VFO: %s\n\n", freq / 1000000, rig_strvfo(vfo));
sleep(1);
#if 0
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 145100000); /* 2m */
sleep(2);
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 435125000); /* 70cm */
sleep(2);
#endif
printf("Setting rig Mode to LSB.\n");
retcode = rig_set_mode(my_rig,
RIG_VFO_CURR,
RIG_MODE_LSB,
RIG_PASSBAND_NORMAL);
if (retcode != RIG_OK)
{
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
sleep(1);
printf("Setting rig PTT ON.\n");
retcode = rig_set_ptt(my_rig, RIG_VFO_A, RIG_PTT_ON); /* stand back ! */
if (retcode != RIG_OK)
{
printf("rig_set_ptt: error = %s \n", rigerror(retcode));
}
sleep(1);
printf("Setting rig PTT OFF.\n");
retcode = rig_set_ptt(my_rig, RIG_VFO_A, RIG_PTT_OFF); /* phew ! */
if (retcode != RIG_OK)
{
printf("rig_set_ptt: error = %s \n", rigerror(retcode));
}
sleep(1);
/*
* Simple examples of getting rig information -- FS
*
*/
printf("\nGet various raw rig values:\n");
retcode = rig_get_vfo(my_rig, &vfo); /* try to get vfo info */
if (retcode == RIG_OK)
{
printf("rig_get_vfo: vfo = %i \n", vfo);
}
else
{
printf("rig_get_vfo: error = %s \n", rigerror(retcode));
}
retcode = rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
if (retcode == RIG_OK)
{
printf("rig_get_freq: freq = %"PRIfreq"\n", freq);
}
else
{
printf("rig_get_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
if (retcode == RIG_OK)
{
// cppcheck-suppress *
printf("rig_get_mode: mode = %s\n", rig_strrmode(rmode));
}
else
{
printf("rig_get_mode: error = %s \n", rigerror(retcode));
}
retcode = rig_get_strength(my_rig, RIG_VFO_CURR, &strength);
if (retcode == RIG_OK)
{
printf("rig_get_strength: strength = %i \n", strength);
}
else
{
printf("rig_get_strength: error = %s \n", rigerror(retcode));
}
if (rig_has_set_func(my_rig, RIG_FUNC_RIT))
{
retcode = rig_set_func(my_rig, RIG_VFO_CURR, RIG_FUNC_RIT, 1);
if (retcode != RIG_OK) { printf("rig_set_func RIT error: %s\n", rigerror(retcode)); }
printf("rig_set_func: Setting RIT ON\n");
}
if (rig_has_get_func(my_rig, RIG_FUNC_RIT))
{
retcode = rig_get_func(my_rig, RIG_VFO_CURR, RIG_FUNC_RIT, &rit);
if (retcode != RIG_OK) { printf("rig_get_func RIT error: %s\n", rigerror(retcode)); }
printf("rig_get_func: RIT: %d\n", rit);
}
if (rig_has_set_func(my_rig, RIG_FUNC_XIT))
{
retcode = rig_set_func(my_rig, RIG_VFO_CURR, RIG_FUNC_XIT, 1);
if (retcode != RIG_OK) { printf("rig_set_func XIT error: %s\n", rigerror(retcode)); }
printf("rig_set_func: Setting XIT ON\n");
}
if (rig_has_get_func(my_rig, RIG_FUNC_XIT))
{
retcode = rig_get_func(my_rig, RIG_VFO_CURR, RIG_FUNC_XIT, &xit);
if (retcode != RIG_OK) { printf("rig_get_func XIT error: %s\n", rigerror(retcode)); }
printf("rig_get_func: XIT: %d\n", xit);
}
rig_close(my_rig); /* close port */
rig_cleanup(my_rig); /* if you care about memory */
printf("port %s closed ok \n", SERIAL_PORT);
for (unsigned long i = 1; i < 0x80000000; i = i << 1)
{
const char *vfostr = rig_strvfo(i);
if (strlen(vfostr) > 0) { printf("0x%08lx=%s\n", i, vfostr); }
}
return 0;
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik