Hamlib/rigs/yaesu/ft600.h

140 wiersze
3.9 KiB
C

/*
* hamlib - (C) Frank Singleton 2000-2003 (vk3fcs@ix.netcom.com)
* (C) Stephane Fillod 2000-2009
*
* ft600.h -(C) Kārlis Millers YL3ALK 2019
*
* This shared library provides an API for communicating
* via serial interface to an FT-600 using the "CAT" interface.
* The starting point for this code was Chris Karpinsky's ft100 implementation.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifndef _FT600_H
#define _FT600_H 1
#define FT600_STATUS_UPDATE_DATA_LENGTH 19
#define FT600_METER_INFO_LENGTH 5
#define FT600_WRITE_DELAY 5
#define FT600_POST_WRITE_DELAY 200
#define FT600_DEFAULT_READ_TIMEOUT 2000
enum ft600_native_cmd_e {
FT600_NATIVE_CAT_LOCK_ON = 0,
FT600_NATIVE_CAT_LOCK_OFF,
FT600_NATIVE_CAT_PTT_ON,
FT600_NATIVE_CAT_PTT_OFF,
FT600_NATIVE_CAT_SET_FREQ,
FT600_NATIVE_CAT_SET_MODE_LSB,
FT600_NATIVE_CAT_SET_MODE_USB,
FT600_NATIVE_CAT_SET_MODE_DIG,
FT600_NATIVE_CAT_SET_MODE_CW,
FT600_NATIVE_CAT_SET_MODE_AM,
FT600_NATIVE_CAT_CLAR_ON,
FT600_NATIVE_CAT_CLAR_OFF,
FT600_NATIVE_CAT_SET_CLAR_FREQ,
FT600_NATIVE_CAT_SET_VFOAB,
FT600_NATIVE_CAT_SET_VFOA,
FT600_NATIVE_CAT_SET_VFOB,
FT600_NATIVE_CAT_SPLIT_ON,
FT600_NATIVE_CAT_SPLIT_OFF,
FT600_NATIVE_CAT_SET_RPT_SHIFT_MINUS,
FT600_NATIVE_CAT_SET_RPT_SHIFT_PLUS,
FT600_NATIVE_CAT_SET_RPT_SHIFT_SIMPLEX,
FT600_NATIVE_CAT_SET_RPT_OFFSET,
/* fix me */
FT600_NATIVE_CAT_SET_DCS_ON,
FT600_NATIVE_CAT_SET_CTCSS_ENC_ON,
FT600_NATIVE_CAT_SET_CTCSS_ENC_DEC_ON,
FT600_NATIVE_CAT_SET_CTCSS_DCS_OFF,
/* em xif */
FT600_NATIVE_CAT_SET_CTCSS_FREQ,
FT600_NATIVE_CAT_SET_DCS_CODE,
FT600_NATIVE_CAT_GET_RX_STATUS,
FT600_NATIVE_CAT_GET_TX_STATUS,
FT600_NATIVE_CAT_GET_FREQ_MODE_STATUS,
FT600_NATIVE_CAT_PWR_WAKE,
FT600_NATIVE_CAT_PWR_ON,
FT600_NATIVE_CAT_PWR_OFF,
FT600_NATIVE_CAT_READ_STATUS,
FT600_NATIVE_CAT_READ_METERS,
FT600_NATIVE_CAT_READ_FLAGS
};
typedef enum ft600_native_cmd_e ft600_native_cmd_t;
/*
* we are able to get way more info
* than we can set
*
*/
typedef struct
{
unsigned char band_no;
unsigned char freq[16];
unsigned char mode;
unsigned char ctcss;
unsigned char dcs;
unsigned char flag1;
unsigned char flag2;
unsigned char clarifier[2];
unsigned char not_used;
unsigned char step1;
unsigned char step2;
unsigned char filter;
unsigned char stuffing[16];
}
FT600_STATUS_INFO;
typedef struct
{
unsigned char byte[8];
}
FT600_FLAG_INFO;
struct ft600_priv_data {
FT600_STATUS_INFO status;
FT600_FLAG_INFO flags;
unsigned char s_meter;
};
static int ft600_init(RIG *rig);
static int ft600_open(RIG *rig);
static int ft600_cleanup(RIG *rig);
static int ft600_close(RIG *rig);
static int ft600_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
static int ft600_get_freq(RIG *rig, vfo_t vfo, freq_t *freq);
static int ft600_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width);
static int ft600_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width);
static int ft600_get_vfo(RIG *rig, vfo_t *vfo);
static int ft600_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt);
static int ft600_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val);
#endif /* _FT600_H */