Hamlib/rigs/icom/icr8600.c

264 wiersze
8.9 KiB
C

/*
* Hamlib CI-V backend - description of IC-R8600
* Copyright (c) 2000-2004 by Stephane Fillod
* Copyright (c) 2018 by Ekki Plicht
* Copyright (c) 2019 by Malcolm Herring
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h>
#include "hamlib/rig.h"
#include "misc.h"
#include "idx_builtin.h"
#include "token.h"
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#define ICR8600_MODES (RIG_MODE_LSB|RIG_MODE_USB|RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_RTTY|\
RIG_MODE_FM|RIG_MODE_WFM|RIG_MODE_CWR|RIG_MODE_RTTYR|RIG_MODE_SAM|RIG_MODE_SAL|\
RIG_MODE_SAH|RIG_MODE_P25|RIG_MODE_DSTAR|RIG_MODE_DPMR|RIG_MODE_NXDNVN|\
RIG_MODE_NXDN_N|RIG_MODE_DCR)
#define ICR8600_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_ANF|RIG_FUNC_MN|RIG_FUNC_AFC|\
RIG_FUNC_NR|RIG_FUNC_AIP|RIG_FUNC_LOCK|RIG_FUNC_VSC|RIG_FUNC_RESUME|RIG_FUNC_TSQL|\
RIG_FUNC_CSQL|RIG_FUNC_DSQL)
#define ICR8600_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_SQL|\
RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_PREAMP|\
RIG_LEVEL_AGC|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH)
#define ICR8600_PARM_ALL (RIG_PARM_BACKLIGHT|RIG_PARM_BEEP|RIG_PARM_TIME|RIG_PARM_KEYLIGHT)
#define ICR8600_VFO_ALL (RIG_VFO_VFO|RIG_VFO_MEM)
#define ICR8600_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define ICR8600_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_SLCT|\
RIG_SCAN_PRIO|RIG_SCAN_PRIO|RIG_SCAN_DELTA|RIG_SCAN_STOP)
#define ICR8600_ANTS_HF (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3)
#define ICR8600_ANTS_VHF (RIG_ANT_1)
#define ICR8600_STR_CAL { 2, {\
{ 0, -60 }, \
{ 255, 60 }, \
} }
struct cmdparams icr8600_extcmds[] =
{
{ {.s = RIG_PARM_BEEP}, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x00, 0x38}, CMD_DAT_BOL, 1 },
{ {.s = RIG_PARM_BACKLIGHT}, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x01, 0x15}, CMD_DAT_LVL, 2 },
{ {.s = RIG_PARM_KEYLIGHT}, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x01, 0x16}, CMD_DAT_LVL, 2 },
{ {.s = RIG_PARM_TIME}, C_CTL_MEM, S_MEM_PARM, SC_MOD_RW, 2, {0x01, 0x32}, CMD_DAT_TIM, 2 },
{ {.s = RIG_PARM_NONE} }
};
int icr8600_tokens[] = { TOK_DSTAR_DSQL, TOK_DSTAR_CALL_SIGN, TOK_DSTAR_MESSAGE, TOK_DSTAR_STATUS,
TOK_DSTAR_GPS_DATA, TOK_DSTAR_GPS_MESS, TOK_DSTAR_CODE, TOK_DSTAR_TX_DATA,
TOK_SCOPE_DAT, TOK_SCOPE_STS, TOK_SCOPE_DOP, TOK_SCOPE_MSS, TOK_SCOPE_MOD, TOK_SCOPE_SPN,
TOK_SCOPE_HLD, TOK_SCOPE_REF, TOK_SCOPE_SWP, TOK_SCOPE_TYP, TOK_SCOPE_VBW, TOK_SCOPE_FEF,
TOK_BACKEND_NONE
};
/*
* channel caps.
*/
#define ICR8600_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.ant = 1, \
.levels = RIG_LEVEL_ATT|RIG_LEVEL_PREAMP, \
.channel_desc = 1, \
.flags = 1, \
}
static struct icom_priv_caps icr8600_priv_caps =
{
0x96, /* default address */
0, /* 731 mode */
0, /* no XCHG */
r8600_ts_sc_list, /* list of tuning steps */
.antack_len = 2,
.ant_count = 3,
.offs_len = 4, /* Repeater offset is 4 bytes */
.serial_USB_echo_check = 1, /* USB CI-V may not echo */
.extcmds = icr8600_extcmds /* Custom ext_cmd parameters */
};
const struct rig_caps icr8600_caps =
{
RIG_MODEL(RIG_MODEL_ICR8600),
.model_name = "IC-R8600",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 115200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 1,
.timeout = 1000,
.retry = 3,
.has_get_func = ICR8600_FUNC_ALL,
.has_set_func = ICR8600_FUNC_ALL,
.has_get_level = ICR8600_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(ICR8600_LEVEL_ALL),
.has_get_parm = ICR8600_PARM_ALL,
.has_set_parm = RIG_PARM_SET(ICR8600_PARM_ALL),
.level_gran = { [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } } },
.parm_gran = { [PARM_TIME] = { .min = { .i = 0 }, .max = { .i = 86399} } },
.ext_tokens = icr8600_tokens,
.extlevels = icom_ext_levels,
.extfuncs = icom_ext_funcs,
.extparms = icom_ext_parms,
.ctcss_list = common_ctcss_list,
.dcs_list = common_dcs_list,
.preamp = { 20, RIG_DBLST_END, }, /* 20 on HF, 14 on VHF, UHF, same setting */
.attenuator = { 10, 20, 30, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = ICR8600_VFO_OPS,
.scan_ops = ICR8600_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 100,
.chan_desc_sz = 16,
.chan_list = {
{ 0, 99, RIG_MTYPE_MEM, ICR8600_MEM_CAP },
{ 0, 99, RIG_MTYPE_EDGE, ICR8600_MEM_CAP },
/* to be extended */
RIG_CHAN_END,
},
.rx_range_list1 = {
{ kHz(10), MHz(3000), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_VHF },
{ kHz(10), MHz(30), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_HF },
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{ kHz(10), MHz(3000), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_VHF },
{ kHz(10), MHz(30), ICR8600_MODES, -1, -1, ICR8600_VFO_ALL, ICR8600_ANTS_HF },
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{ICR8600_MODES, Hz(100)},
{ICR8600_MODES, kHz(1)},
{ICR8600_MODES, kHz(2.5)},
{ICR8600_MODES, kHz(3.125)},
{ICR8600_MODES, kHz(5)},
{ICR8600_MODES, kHz(6.25)},
{ICR8600_MODES, kHz(8.33)},
{ICR8600_MODES, kHz(9)},
{ICR8600_MODES, kHz(10)},
{ICR8600_MODES, kHz(12.5)},
{ICR8600_MODES, kHz(20)},
{ICR8600_MODES, kHz(25)},
{ICR8600_MODES, kHz(100)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(2.4)},
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(1.9)},
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_CWR | RIG_MODE_RTTY | RIG_MODE_RTTYR, kHz(6)},
{RIG_MODE_AM | RIG_MODE_AMS, kHz(6)},
{RIG_MODE_AM | RIG_MODE_AMS, kHz(2.4)},
{RIG_MODE_AM | RIG_MODE_AMS, kHz(15)},
{RIG_MODE_FM, kHz(15)},
{RIG_MODE_FM, kHz(6)},
RIG_FLT_END,
},
.str_cal = ICR8600_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.set_powerstat = icom_set_powerstat,
.get_powerstat = icom_get_powerstat,
.priv = (void *)& icr8600_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.set_bank = icom_set_bank,
.get_rptr_offs = icom_get_rptr_offs,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_shift = icom_get_rptr_shift,
.set_rptr_shift = icom_set_rptr_shift,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.decode_event = icom_decode_event,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_parm = icom_set_parm,
.get_parm = icom_get_parm,
.set_ext_parm = icom_set_ext_parm,
.get_ext_parm = icom_get_ext_parm,
.set_ext_func = icom_set_ext_func,
.get_ext_func = icom_get_ext_func,
.get_dcd = icom_get_dcd,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_dcs_sql = icom_set_dcs_sql,
.get_dcs_sql = icom_get_dcs_sql,
};