mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/rigs/icom/icr7000.c

322 wiersze
8.6 KiB
C
Czysty Wina Historia

/*
* Hamlib CI-V backend - IC-R7000 and IC-R7100 descriptions
* Copyright (c) 2000-2004 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "serial.h"
#include "misc.h"
#include "idx_builtin.h"
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#define ICR7000_MODES (RIG_MODE_AM|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_WFM)
#define ICR7000_OPS (RIG_OP_FROM_VFO|RIG_OP_MCL)
static int r7000_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
#define ICR7100_FUNCS (RIG_FUNC_VSC)
#define ICR7100_LEVELS (RIG_LEVEL_ATT|RIG_LEVEL_AF|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR)
#define ICR7100_PARMS (RIG_PARM_ANN)
#define ICR7100_SCAN_OPS (RIG_SCAN_MEM) /* TBC */
/* FIXME: S-Meter measurements */
#define ICR7100_STR_CAL UNKNOWN_IC_STR_CAL
static struct icom_priv_caps icr7000_priv_caps =
{
0x08, /* default address */
0, /* 731 mode */
0, /* no XCHG */
r7100_ts_sc_list
};
/*
* ICR7000 rigs capabilities.
*/
const struct rig_caps icr7000_caps =
{
RIG_MODEL(RIG_MODEL_ICR7000),
.model_name = "IC-R7000",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 1200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = ICR7000_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM },
RIG_CHAN_END,
},
.rx_range_list1 = {
{MHz(25), MHz(1000), ICR7000_MODES, -1, -1, RIG_VFO_A},
{MHz(1025), MHz(2000), ICR7000_MODES, -1, -1, RIG_VFO_A},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{MHz(25), MHz(1000), ICR7000_MODES, -1, -1, RIG_VFO_A},
{MHz(1025), MHz(2000), ICR7000_MODES, -1, -1, RIG_VFO_A},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, }, /* no TX ranges, this is a receiver */
.tuning_steps = {
{ICR7000_MODES, 100}, /* resolution */
#if 0
{ICR7000_MODES, kHz(1)},
{ICR7000_MODES, kHz(5)},
{ICR7000_MODES, kHz(10)},
{ICR7000_MODES, 12500},
{ICR7000_MODES, kHz(25)},
#endif
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB, kHz(2.8)},
{RIG_MODE_FM | RIG_MODE_AM, kHz(15)},
{RIG_MODE_FM | RIG_MODE_AM, kHz(6)}, /* narrow */
{RIG_MODE_WFM, kHz(150)},
RIG_FLT_END,
},
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& icr7000_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_close,
.set_freq = r7000_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
};
static struct icom_priv_caps icr7100_priv_caps =
{
0x34, /* default address */
0, /* 731 mode */
0, /* no XCHG */
r7100_ts_sc_list
};
/*
* ICR7100A rig capabilities.
*/
const struct rig_caps icr7100_caps =
{
RIG_MODEL(RIG_MODEL_ICR7100),
.model_name = "IC-R7100",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 1200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = ICR7100_FUNCS,
.has_set_func = ICR7100_FUNCS,
.has_get_level = ICR7100_LEVELS,
.has_set_level = RIG_LEVEL_SET(ICR7100_LEVELS),
.has_get_parm = ICR7100_PARMS,
.has_set_parm = RIG_PARM_SET(ICR7100_PARMS),
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END },
.attenuator = { 20, RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = ICR7000_OPS,
.scan_ops = ICR7100_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM }, /* TBC */
{ 0x0900, 0x0909, RIG_MTYPE_EDGE }, /* 2 by 2 */
{ 0x0910, 0x0919, RIG_MTYPE_EDGE }, /* 2 by 2 */
RIG_CHAN_END,
},
.rx_range_list1 = {
{MHz(25), MHz(1999.9999), ICR7000_MODES, -1, -1, RIG_VFO_A},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{MHz(25), MHz(1999.9999), ICR7000_MODES, -1, -1, RIG_VFO_A},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, }, /* no TX ranges, this is a receiver */
.tuning_steps = {
{ICR7000_MODES, 100}, /* resolution */
{ICR7000_MODES, kHz(1)},
{ICR7000_MODES, kHz(5)},
{ICR7000_MODES, kHz(10)},
{ICR7000_MODES, 12500},
{ICR7000_MODES, kHz(20)},
{ICR7000_MODES, kHz(25)},
{ICR7000_MODES, kHz(100)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB, kHz(2.4)},
{RIG_MODE_FM | RIG_MODE_AM, kHz(15)},
{RIG_MODE_FM | RIG_MODE_AM, kHz(6)}, /* narrow */
{RIG_MODE_WFM, kHz(150)},
RIG_FLT_END,
},
.str_cal = ICR7100_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& icr7100_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = r7000_set_freq, /* TBC for R7100 */
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_level = icom_set_level,
.get_level = icom_get_level,
#ifdef XXREMOVEDXX
.set_parm = icom_set_parm,
.get_parm = icom_get_parm,
#endif
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.get_dcd = icom_get_dcd,
};
/*
* Function definitions below
*/
/*
* r7000_set_freq
*/
static int r7000_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
long long f = (long long)freq;
/*
* The R7000 cannot set frequencies higher than 1GHz,
* this is done by flipping a switch on the front panel and
* stripping the most significant digit.
* This is the only change with the common icom_set_freq
*/
f %= (long long)GHz(1);
return icom_set_freq(rig, vfo, (freq_t)f);
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik