Hamlib/rigs/icom/ic738.c

190 wiersze
5.6 KiB
C

/*
* Hamlib CI-V backend - description of IC-738 and variations
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include <bandplan.h>
#include "icom.h"
/*
* IC-738, like the IC-736 but without 6m
*/
#define IC738_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
/*
* 100W in all modes but AM (40W)
*/
#define IC738_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define IC738_AM_TX_MODES (RIG_MODE_AM)
#define IC738_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define IC738_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_CPY)
#define IC738_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_PROG|RIG_SCAN_VFO)
#define IC738_ANTS 0 /* TODO: declare both antenna connectors? */
#define IC738_STR_CAL { 0, { } }
/*
*/
static const struct icom_priv_caps ic738_priv_caps =
{
0x44, /* default address */
0, /* 731 mode */
0, /* no XCHG */
ic737_ts_sc_list
};
const struct rig_caps ic738_caps =
{
RIG_MODEL(RIG_MODEL_IC738),
.model_name = "IC-738",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC738_VFO_OPS,
.scan_ops = IC738_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 89, RIG_MTYPE_MEM, IC_MIN_MEM_CAP },
{ 90, 99, RIG_MTYPE_MEM, IC_MIN_MEM_CAP }, /* FIXME: split */
{ 100, 101, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(500), MHz(30), IC738_ALL_RX_MODES, -1, -1, IC738_VFO_ALL, IC738_ANTS},
{MHz(50), MHz(54), IC738_ALL_RX_MODES, -1, -1, IC738_VFO_ALL, IC738_ANTS},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, IC738_OTHER_TX_MODES, W(5), W(100), IC738_VFO_ALL, IC738_ANTS),
FRQ_RNG_HF(1, IC738_AM_TX_MODES, W(4), W(40), IC738_VFO_ALL, IC738_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(500), MHz(30), IC738_ALL_RX_MODES, -1, -1, IC738_VFO_ALL, IC738_ANTS},
{MHz(50), MHz(54), IC738_ALL_RX_MODES, -1, -1, IC738_VFO_ALL, IC738_ANTS},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, IC738_OTHER_TX_MODES, W(5), W(100), IC738_VFO_ALL, IC738_ANTS),
FRQ_RNG_HF(2, IC738_AM_TX_MODES, W(4), W(40), IC738_VFO_ALL, IC738_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = { /* TBC */
{IC738_ALL_RX_MODES, 10},
{IC738_ALL_RX_MODES, kHz(1)},
{IC738_ALL_RX_MODES, kHz(2)},
{IC738_ALL_RX_MODES, kHz(3)},
{IC738_ALL_RX_MODES, kHz(4)},
{IC738_ALL_RX_MODES, kHz(5)},
{IC738_ALL_RX_MODES, kHz(6)},
{IC738_ALL_RX_MODES, kHz(7)},
{IC738_ALL_RX_MODES, kHz(8)},
{IC738_ALL_RX_MODES, kHz(9)},
{IC738_ALL_RX_MODES, kHz(10)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW, kHz(2.1)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& ic738_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = icom_rig_open,
.rig_close = icom_rig_open,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ts = icom_set_ts,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_vfo = icom_set_split_vfo,
};