Hamlib/kenwood/ts811.c

200 wiersze
5.3 KiB
C

/*
* Hamlib Kenwood backend - TS-811 description
* Copyright (c) 2000-2004 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "kenwood.h"
#include "ic10.h"
#define TS811_ALL_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define TS811_LEVEL_ALL (RIG_LEVEL_STRENGTH)
#define TS811_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define TS811_VFO_OP (RIG_OP_UP|RIG_OP_DOWN)
#define TS811_SCAN_OP (RIG_SCAN_VFO)
static struct kenwood_priv_caps ts811_priv_caps =
{
.cmdtrm = EOM_KEN,
};
/*
* vfo defines
*/
#define VFO_A '0'
#define VFO_B '1'
#define VFO_MEM '2'
/* Note: The 140/680/711/811 need this to set the VFO on the radio */
static int
ts811_set_vfo(RIG *rig, vfo_t vfo)
{
char cmdbuf[16];
char vfo_function;
switch (vfo)
{
case RIG_VFO_VFO:
case RIG_VFO_A: vfo_function = VFO_A; break;
case RIG_VFO_B: vfo_function = VFO_B; break;
case RIG_VFO_MEM: vfo_function = VFO_MEM; break;
case RIG_VFO_CURR: return RIG_OK;
default:
rig_debug(RIG_DEBUG_ERR, "%s: unsupported VFO %d\n",
__func__, vfo);
return -RIG_EINVAL;
}
sprintf(cmdbuf, "FN%c", vfo_function);
return kenwood_transaction(rig, cmdbuf, NULL, 0);
}
/*
* ts811 rig capabilities.
*/
const struct rig_caps ts811_caps =
{
.rig_model = RIG_MODEL_TS811,
.model_name = "TS-811",
.mfg_name = "Kenwood",
.version = BACKEND_VER ".1",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 10,
.has_get_func = RIG_FUNC_LOCK,
.has_set_func = RIG_FUNC_LOCK,
.has_get_level = TS811_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(TS811_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = kenwood38_ctcss_list,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = kHz(9.9),
.max_xit = 0,
.max_ifshift = 0,
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
/* FIXME: split memories, call channel, etc. */
.chan_list = {
{ 1, 59, RIG_MTYPE_MEM },
RIG_CHAN_END,
},
.rx_range_list1 = {
{MHz(430), MHz(440), TS811_ALL_MODES, -1, -1, TS811_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list1 = {
{MHz(430), MHz(440), TS811_ALL_MODES, W(5), W(25), TS811_VFO},
RIG_FRNG_END,
}, /* tx range */
.rx_range_list2 = {
{MHz(430), MHz(450), TS811_ALL_MODES, -1, -1, TS811_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = {
{MHz(430), MHz(450), TS811_ALL_MODES, W(5), W(25), TS811_VFO},
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = {
{TS811_ALL_MODES, 50},
{TS811_ALL_MODES, 100},
{TS811_ALL_MODES, kHz(1)},
{TS811_ALL_MODES, kHz(5)},
{TS811_ALL_MODES, kHz(9)},
{TS811_ALL_MODES, kHz(10)},
{TS811_ALL_MODES, 12500},
{TS811_ALL_MODES, kHz(20)},
{TS811_ALL_MODES, kHz(25)},
{TS811_ALL_MODES, kHz(100)},
{TS811_ALL_MODES, MHz(1)},
{TS811_ALL_MODES, 0}, /* any tuning step */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW, kHz(2.2)},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.priv = (void *)& ts811_priv_caps,
.rig_init = kenwood_init,
.rig_cleanup = kenwood_cleanup,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode_if,
.set_vfo = ts811_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.set_ptt = kenwood_set_ptt,
.set_func = kenwood_set_func,
.get_func = kenwood_get_func,
.vfo_op = kenwood_vfo_op,
.set_mem = kenwood_set_mem,
.get_mem = kenwood_get_mem_if,
.reset = kenwood_reset,
};
/*
* Function definitions below
*/