Hamlib/rigs/kenwood/thd7.c

207 wiersze
5.9 KiB
C

/*
* Hamlib Kenwood backend - TH-D7 description
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "kenwood.h"
#include "th.h"
#if 1
#define RIG_ASSERT(x) if (!(x)) { rig_debug(RIG_DEBUG_ERR, "Assertion failed on line %i\n",__LINE__); abort(); }
#else
#define RIG_ASSERT(x)
#endif
#define THD7_MODES (RIG_MODE_FM|RIG_MODE_AM)
#define THD7_MODES_TX (RIG_MODE_FM)
#define THD7_FUNC_ALL (RIG_FUNC_TSQL| \
RIG_FUNC_AIP| \
RIG_FUNC_MON| \
RIG_FUNC_SQL| \
RIG_FUNC_TONE| \
RIG_FUNC_REV| \
RIG_FUNC_LOCK| \
RIG_FUNC_ARO)
#define THD7_LEVEL_ALL (RIG_LEVEL_STRENGTH| \
RIG_LEVEL_SQL| \
RIG_LEVEL_AF| \
RIG_LEVEL_RF|\
RIG_LEVEL_MICGAIN)
#define THD7_PARMS (RIG_PARM_BACKLIGHT)
#define THD7_VFO_OP (RIG_OP_UP|RIG_OP_DOWN)
/*
* TODO: Band A & B
*/
#define THD7_VFO (RIG_VFO_A|RIG_VFO_B)
static rmode_t td7_mode_table[KENWOOD_MODE_TABLE_MAX] =
{
[0] = RIG_MODE_FM,
[1] = RIG_MODE_AM,
};
static struct kenwood_priv_caps thd7_priv_caps =
{
.cmdtrm = EOM_TH, /* Command termination character */
.mode_table = td7_mode_table,
};
/*
* th-d7a rig capabilities.
*
* http://www.qsl.net/ta1dx/kenwood/thd7kom.htm
*/
const struct rig_caps thd7a_caps =
{
RIG_MODEL(RIG_MODEL_THD7A),
.model_name = "TH-D7A",
.mfg_name = "Kenwood",
.version = TH_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_HANDHELD | RIG_FLAG_APRS | RIG_FLAG_TNC | RIG_FLAG_DXCLUSTER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600,
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = THD7_FUNC_ALL,
.has_set_func = THD7_FUNC_ALL,
.has_get_level = THD7_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(THD7_LEVEL_ALL),
.has_get_parm = THD7_PARMS,
.has_set_parm = THD7_PARMS, /* FIXME: parms */
.level_gran = {
// cppcheck-suppress *
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 5 } },
[LVL_SQL] = { .min = { .i = 0 }, .max = { .i = 5 } },
[LVL_RFPOWER] = { .min = { .i = 3 }, .max = { .i = 0 } },
},
.parm_gran = {},
.ctcss_list = kenwood38_ctcss_list,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.vfo_ops = THD7_VFO_OP,
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 6,
.chan_list = {
{ 1, 199, RIG_MTYPE_MEM, {TH_CHANNEL_CAPS}}, /* normal MEM */
{ 200, 219, RIG_MTYPE_EDGE, {TH_CHANNEL_CAPS}}, /* U/L MEM */
{ 221, 222, RIG_MTYPE_CALL, {TH_CHANNEL_CAPS}}, /* Call 0/1 */
RIG_CHAN_END,
},
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{MHz(144), MHz(148), THD7_MODES, -1, -1, THD7_VFO},
{MHz(430), MHz(440), THD7_MODES, -1, -1, THD7_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = {
{MHz(144), MHz(148), THD7_MODES_TX, W(5.5), W(5.5), THD7_VFO},
{MHz(430), MHz(440), THD7_MODES_TX, W(5.5), W(5.5), THD7_VFO},
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = {
{THD7_MODES, kHz(5)},
{THD7_MODES, kHz(6.25)},
{THD7_MODES, kHz(10)},
{THD7_MODES, kHz(12.5)},
{THD7_MODES, kHz(15)},
{THD7_MODES, kHz(20)},
{THD7_MODES, kHz(25)},
{THD7_MODES, kHz(30)},
{THD7_MODES, kHz(50)},
{THD7_MODES, kHz(100)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_FM, kHz(14)},
{RIG_MODE_AM, kHz(9)},
RIG_FLT_END,
},
.priv = (void *)& thd7_priv_caps,
.rig_init = kenwood_init,
.rig_open = kenwood_open,
.rig_close = kenwood_close,
.rig_cleanup = kenwood_cleanup,
.set_freq = th_set_freq,
.get_freq = th_get_freq,
.set_mode = th_set_mode,
.get_mode = th_get_mode,
.set_vfo = th_set_vfo,
.get_vfo = th_get_vfo,
.set_ctcss_tone = th_set_ctcss_tone,
.get_ctcss_tone = th_get_ctcss_tone,
.set_ctcss_sql = th_set_ctcss_sql,
.get_ctcss_sql = th_get_ctcss_sql,
.set_mem = th_set_mem,
.get_mem = th_get_mem,
.set_channel = th_set_channel,
.get_channel = th_get_channel,
.set_trn = th_set_trn,
.get_trn = th_get_trn,
.get_func = th_get_func,
.get_level = th_get_level,
.get_parm = th_get_parm,
.get_info = th_get_info,
.get_dcd = th_get_dcd,
.decode_event = th_decode_event,
};
/* end of file */