Hamlib/rigs/yaesu/ft991.h

164 wiersze
6.8 KiB
C

/*
* hamlib - (C) Frank Singleton 2000 (javabear at users.sourceforge.net)
*
* ft991.h - (C) Nate Bargmann 2007 (n0nb at arrl.net)
* (C) Stephane Fillod 2008
*
* This shared library provides an API for communicating
* via serial interface to an FT-950 using the "CAT" interface
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifndef _FT991_H
#define _FT991_H 1
#define FT991_VFO_ALL (RIG_VFO_A|RIG_VFO_B)
/* Receiver caps */
#define FT991_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|\
RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB|RIG_MODE_PKTFM|\
RIG_MODE_C4FM|RIG_MODE_FM|RIG_MODE_AMN|RIG_MODE_FMN)
#define FT991_SSB_CW_RX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|\
RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB)
#define FT991_AM_RX_MODES (RIG_MODE_AM|RIG_MODE_AMN)
#define FT991_FM_RX_MODES (RIG_MODE_FM|RIG_MODE_PKTFM|RIG_MODE_FMN|RIG_MODE_C4FM)
#define FT991_CW_RX_MODES (RIG_MODE_CW|RIG_MODE_CWR)
#define FT991_CW_RTTY_PKT_RX_MODES (RIG_MODE_RTTY|RIG_MODE_RTTYR|\
RIG_MODE_PKTUSB|RIG_MODE_PKTLSB|RIG_MODE_CW|RIG_MODE_CWR)
/* TRX caps */
#define FT991_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_USB|RIG_MODE_LSB|RIG_MODE_PKTUSB|RIG_MODE_PKTLSB|\
RIG_MODE_FM|RIG_MODE_PKTFM|RIG_MODE_FMN) /* 100 W class */
#define FT991_AM_TX_MODES (RIG_MODE_AM|RIG_MODE_AMN) /* set 25W max */
#define FT991_LEVELS (RIG_LEVEL_ATT|RIG_LEVEL_PREAMP|RIG_LEVEL_STRENGTH|\
RIG_LEVEL_ALC|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH|RIG_LEVEL_SWR|\
RIG_LEVEL_RFPOWER|RIG_LEVEL_RF|RIG_LEVEL_SQL|\
RIG_LEVEL_MICGAIN|RIG_LEVEL_IF|RIG_LEVEL_CWPITCH|\
RIG_LEVEL_KEYSPD|RIG_LEVEL_AF|RIG_LEVEL_AGC|\
RIG_LEVEL_METER|RIG_LEVEL_BKINDL|RIG_LEVEL_SQL|\
RIG_LEVEL_VOXGAIN|RIG_LEVEL_VOXDELAY|RIG_LEVEL_COMP|\
RIG_LEVEL_ANTIVOX|RIG_LEVEL_NR|RIG_LEVEL_NOTCHF|\
RIG_LEVEL_MONITOR_GAIN|RIG_LEVEL_RFPOWER_METER|\
RIG_LEVEL_COMP_METER|RIG_LEVEL_VD_METER|RIG_LEVEL_ID_METER)
#define FT991_FUNCS (RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_LOCK|\
RIG_FUNC_MON|RIG_FUNC_NB|RIG_FUNC_NR|RIG_FUNC_VOX|\
RIG_FUNC_FBKIN|RIG_FUNC_COMP|RIG_FUNC_ANF|RIG_FUNC_MN|\
RIG_FUNC_RIT|RIG_FUNC_XIT|\
RIG_FUNC_TUNER)
#define FT991_VFO_OPS (RIG_OP_TUNE|RIG_OP_CPY|RIG_OP_XCHG|\
RIG_OP_UP|RIG_OP_DOWN|RIG_OP_BAND_UP|RIG_OP_BAND_DOWN|\
RIG_OP_TO_VFO|RIG_OP_FROM_VFO)
/* TBC */
#define FT991_STR_CAL { 16, \
{ \
{ 0, -54 }, /* S0 */ \
{ 12, -48 }, /* S1 */ \
{ 27, -42 }, /* S2 */ \
{ 40, -36 }, /* S3 */ \
{ 55, -30 }, /* S4 */ \
{ 65, -24 }, /* S5 */ \
{ 80, -18 }, /* S6 */ \
{ 95, -12 }, /* S7 */ \
{ 112, -6 }, /* S8 */ \
{ 130, 0 }, /* S9 */ \
{ 150, 10 }, /* +10 */ \
{ 172, 20 }, /* +20 */ \
{ 190, 30 }, /* +30 */ \
{ 220, 40 }, /* +40 */ \
{ 240, 50 }, /* +50 */ \
{ 255, 60 }, /* +60 */ \
} }
/*
* Other features (used by rig_caps)
*
*/
// The FT991 does not have antenna selection
#define FT991_ANTS (RIG_ANT_CURR)
#define FT991_MEM_CHNL_LENGTH 1 /* 0x10 P1 = 01 return size */
#define FT991_OP_DATA_LENGTH 19 /* 0x10 P1 = 03 return size */
#define FT991_VFO_DATA_LENGTH 18 /* 0x10 P1 = 03 return size -- A & B returned */
#define FT991_MEM_CHNL_DATA_LENGTH 19 /* 0x10 P1 = 04, P4 = 0x01-0x20 return size */
#define FT991_STATUS_FLAGS_LENGTH 5 /* 0xf7, 0xfa return size */
#define FT991_ALL_DATA_LENGTH 649 /* 0x10 P1 = 00 return size */
/* Timing values in mS */
// #define FT991_PACING_INTERVAL 5
// #define FT991_PACING_DEFAULT_VALUE 0
/* Delay between bytes sent to FT-991
* Should not exceed value set in CAT TOT menu (rig default is 10 mSec)
*/
#define FT991_WRITE_DELAY 0
/* Delay sequential fast writes */
#define FT991_POST_WRITE_DELAY 25
typedef struct
{
char command[2]; /* depends on command "IF", "MR", "MW" "OI" */
char memory_ch[3]; /* 001 -> 117 */
char vfo_freq[9]; /* 9 digit value in Hz */
char clarifier[5]; /* '+' | '-', 0000 -> 9999 Hz */
char rx_clarifier; /* '0' = off, '1' = on */
char tx_clarifier; /* '0' = off, '1' = on */
char mode; /* '1'=LSB, '2'=USB, '3'=CW, '4'=FM, '5'=AM, */
/* '6'=RTTY-LSB, '7'=CW-R, '8'=DATA-LSB, */
/* '9'=RTTY-USB,'A'=DATA-FM, 'B'=FM-N, */
/* 'C'=DATA-USB, 'D'=AM-N, 'E'=C4FM */
char vfo_memory; /* '0'=VFO, '1'=Memory, '2'=Memory Tune, */
/* '3'=Quick Memory Bank, '4'=QMB-MT, '5'=PMS, '6'=HOME */
char tone_mode; /* '0' = off, CTCSS '1' ENC, '2' ENC/DEC, */
/* '3' = DCS ENC/DEC, '4' = ENC */
char fixed[2]; /* Always '0', '0' */
char repeater_offset; /* '0' = Simplex, '1' Plus, '2' minus */
char terminator; /* ';' */
} ft991info;
/* Prototypes */
static int ft991_init(RIG *rig);
static int ft991_get_split_mode(RIG *rig, vfo_t vfo, rmode_t *tx_mode,
pbwidth_t *tx_width);
static int ft991_set_split_mode(RIG *rig, vfo_t vfo, rmode_t tx_mode,
pbwidth_t tx_width);
static int ft991_set_split_freq(RIG *rig, vfo_t vfo, freq_t tx_freq);
static int ft991_get_split_freq(RIG *rig, vfo_t vfo, freq_t *tx_freq);
static void debug_ft991info_data(const ft991info *rdata);
static int ft991_set_ctcss_tone(RIG *rig, vfo_t vfo, tone_t tone);
static int ft991_get_ctcss_tone(RIG *rig, vfo_t vfo, tone_t *tone);
static int ft991_set_dcs_code(RIG *rig, vfo_t vfo, tone_t code);
static int ft991_get_dcs_code(RIG *rig, vfo_t vfo, tone_t *code);
static int ft991_set_ctcss_sql(RIG *rig, vfo_t vfo, tone_t tone);
static int ft991_get_ctcss_sql(RIG *rig, vfo_t vfo, tone_t *tone);
static int ft991_get_dcs_sql(RIG *rig, vfo_t vfo, tone_t *code);
static int ft991_set_dcs_sql(RIG *rig, vfo_t vfo, tone_t code);
#endif /* _FT991_H */