Hamlib/icom/icr8500.c

203 wiersze
5.3 KiB
C

/*
* Hamlib CI-V backend - IC-R8500 description
* Copyright (c) 2000-2004 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "idx_builtin.h"
#include "icom.h"
#define ICR8500_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM|RIG_MODE_WFM)
#define ICR8500_1MHZ_TS_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)
#define ICR8500_FUNC_ALL (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_TSQL|RIG_FUNC_APF)
#define ICR8500_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_APF|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR)
#define ICR8500_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define ICR8500_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_SLCT|RIG_SCAN_PRIO)
/* FIXME: real measure */
#define ICR8500_STR_CAL { 16, { \
{ 0, -54 }, /* S0 */ \
{ 10, -48 }, \
{ 32, -42 }, \
{ 46, -36 }, \
{ 62, -30 }, \
{ 82, -24 }, \
{ 98, -18 }, \
{ 112, -12 }, \
{ 124, -6 }, \
{ 134, 0 }, /* S9 */ \
{ 156, 10 }, \
{ 177, 20 }, \
{ 192, 30 }, \
{ 211, 40 }, \
{ 228, 50 }, \
{ 238, 60 }, \
} }
static const struct icom_priv_caps icr8500_priv_caps = {
0x4a, /* default address */
0, /* 731 mode */
r8500_ts_sc_list
};
/*
* ICR8500 rigs capabilities.
*/
const struct rig_caps icr8500_caps = {
.rig_model = RIG_MODEL_ICR8500,
.model_name = "ICR-8500",
.mfg_name = "Icom",
.version = BACKEND_VER ".1",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = ICR8500_FUNC_ALL,
.has_get_level = ICR8500_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(ICR8500_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = NULL, /* FIXME: CTCSS/DCS list */
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END, },
.attenuator = { 20, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = ICR8500_OPS,
.scan_ops = ICR8500_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 12,
.chan_desc_sz = 0,
.str_cal = ICR8500_STR_CAL,
.chan_list = { /* FIXME: memory channel list */
{ 1, 999, RIG_MTYPE_MEM, IC_MIN_MEM_CAP },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(100),MHz(824)-10,ICR8500_MODES,-1,-1, RIG_VFO_A},
{MHz(849)+10,MHz(869)-10,ICR8500_MODES,-1,-1, RIG_VFO_A},
{MHz(894)+10,GHz(2)-10,ICR8500_MODES,-1,-1, RIG_VFO_A},
RIG_FRNG_END, },
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(100),MHz(824)-10,ICR8500_MODES,-1,-1, RIG_VFO_A},
{MHz(849)+10,MHz(869)-10,ICR8500_MODES,-1,-1, RIG_VFO_A},
{MHz(894)+10,GHz(2)-10,ICR8500_MODES,-1,-1, RIG_VFO_A},
RIG_FRNG_END, },
.tx_range_list2 = { RIG_FRNG_END, }, /* no TX ranges, this is a receiver */
.tuning_steps = {
{ICR8500_MODES,10},
{ICR8500_MODES,50},
{ICR8500_MODES,100},
{ICR8500_MODES,kHz(1)},
{ICR8500_MODES,2500},
{ICR8500_MODES,kHz(5)},
{ICR8500_MODES,kHz(9)},
{ICR8500_MODES,kHz(10)},
{ICR8500_MODES,12500},
{ICR8500_MODES,kHz(20)},
{ICR8500_MODES,kHz(25)},
{ICR8500_MODES,kHz(100)},
{ICR8500_1MHZ_TS_MODES,MHz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
/* FIXME: To be confirmed! --SF */
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)},
{RIG_MODE_AM, kHz(8)},
{RIG_MODE_AM, kHz(2.4)}, /* narrow */
{RIG_MODE_AM, kHz(15)}, /* wide */
{RIG_MODE_FM, kHz(15)},
{RIG_MODE_FM, kHz(8)}, /* narrow */
{RIG_MODE_WFM, kHz(230)},
RIG_FLT_END,
},
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&icr8500_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.get_dcd = icom_get_dcd,
};
/*
* Function definitions below
*/