Hamlib/rigs/aor
Mike Black W9MDB 9e86e62238 Enable async I/O by default
Change hamlib_port_t to a pointer in rig.state
Deprecate static hamlib_port_t structure
New hamlib_port_t structure at end of rig.state
Clients built with older hamlib will use old structure in DLL
Clients built with newer hamlib will use new structure in DLL
So we maintain backwards compatibility until Hamlib 5.0
https://github.com/Hamlib/Hamlib/issues/894
2022-01-25 07:59:47 -06:00
..
Android.mk
Makefile.am
README.aor
README.ar5000
README.ar7030
aor.c Enable async I/O by default 2022-01-25 07:59:47 -06:00
aor.h
ar2700.c
ar3000.c Enable async I/O by default 2022-01-25 07:59:47 -06:00
ar3030.c Enable async I/O by default 2022-01-25 07:59:47 -06:00
ar5000.c
ar7030.c Enable async I/O by default 2022-01-25 07:59:47 -06:00
ar7030p.c Enable async I/O by default 2022-01-25 07:59:47 -06:00
ar7030p.h
ar7030p_utils.c Enable async I/O by default 2022-01-25 07:59:47 -06:00
ar8000.c
ar8200.c
ar8600.c
sr2200.c Enable async I/O by default 2022-01-25 07:59:47 -06:00

README.ar7030

hamlib-1.2.3 aor ar7030.c

2004.11.26

Parameteraenderung fuer USB-Serial
//.post_write_delay =  0,   //Device: /dev/ttyS0
//.post_write_delay =  85,  //Device: /dev/tts/USB0 < 85 sec 'timedout after 0 chars'

Befehle mit rigctl
# rigctl -m 503 -r /dev/ttyS0
# rigctl -m 503 -r /dev/tts/USB0

Rig command: F               Frequency:   0 .. 32016718 Hz

Rig command: f
Rig command: \get_freq

Rig command: M               Mode:        FM, AMS, AM, USB, LSB, CW, RTTY
                             Passband:    1 - 6

Rig command: m               Passband:    800, 2100, 3700, 5200, 9500, XXXX (Value from RX) Hz

Rig command: L
  Level: AF                  Value: 0.0 - 1.0
  Level: RF                  Value: 0.1, 0.0 -0.1, -0.2, -0.3, -0.4  >  +10, 0 ,-10 , -20, -30, -40 dB
  Level: SQL                 Value: 0.0 - 1.0
  Level: AGC                 Value: 0 > OFF, 2 > FAST, 3 > SLOW, 5 > MEDIUM
  Level: CWPITCH             Value: -4248 .. 0 .. 4215 Hz


Rig command: l
  Level: AF
  Level: RF
  Level: SQL
  Level: AGC
  Level: CWPITCH
  Level: RAWSTR
  Level: STRENGTH            Value: -121dBm ... -23dBm > S1 ... S9 + 50 dB 

Rig command: \set_powerstat  Status: 0 > Power off, 1 > Power on

Rig command: \get_powerstat

Rig command: \reset          Reset: 1 > Software reset

Rig command:                 Quitt Q q

Rig command:                 Quitt Q Q

Rig command: 1               Caps dump for model 503

Friedrich Melchert (DC9RP)