kopia lustrzana https://github.com/Hamlib/Hamlib
792 wiersze
22 KiB
C
792 wiersze
22 KiB
C
/*
|
|
* hamlib - (C) Frank Singleton 2000,2001 (vk3fcs@ix.netcom.com)
|
|
*
|
|
* ft847.c - (C) Frank Singleton 2000 (vk3fcs@ix.netcom.com)
|
|
* This shared library provides an API for communicating
|
|
* via serial interface to an FT-847 using the "CAT" interface.
|
|
*
|
|
*
|
|
* $Id: ft847.c,v 1.30 2005-01-25 00:21:58 fillods Exp $
|
|
*
|
|
*
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
|
|
/*
|
|
* TODO - Remove static stuff, see ft747 for new style [started]
|
|
* - create yaesu.h for common command structure etc..[started]
|
|
* - add mode set before freq set to avoid prior mode offset (eg: CW)
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Notes on limitations in RIG control capabilities. These are
|
|
* related to the Yaesu's FT847 design, not my program :-)
|
|
*
|
|
* 1. Rig opcodes allow only 10Hz resolution.
|
|
* 2. Cannot select VFO B
|
|
* 3. Using CAT and Tuner controls simultaneously can
|
|
* cause problems.
|
|
*
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <stdlib.h>
|
|
#include <string.h> /* String function definitions */
|
|
#include <unistd.h> /* UNIX standard function definitions */
|
|
|
|
#include "hamlib/rig.h"
|
|
#include "serial.h"
|
|
#include "yaesu.h"
|
|
#include "ft847.h"
|
|
#include "misc.h"
|
|
|
|
/* prototypes */
|
|
|
|
static int ft847_send_priv_cmd(RIG *rig, unsigned char ci);
|
|
|
|
|
|
/* Native ft847 cmd set prototypes. These are READ ONLY as each */
|
|
/* rig instance will copy from these and modify if required . */
|
|
/* Complete sequences (1) can be read and used directly as a cmd sequence . */
|
|
/* Incomplete sequences (0) must be completed with extra parameters */
|
|
/* eg: mem number, or freq etc.. */
|
|
|
|
static const yaesu_cmd_set_t ncmd[] = {
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x00 } }, /* CAT = On */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x80 } }, /* CAT = Off */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x08 } }, /* ptt on */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x01, 0x88 } }, /* ptt off */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x4e } }, /* sat mode on */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x8e } }, /* sat mode off */
|
|
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x01 } }, /* set freq main */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x11 } }, /* set freq sat rx */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x21 } }, /* set freq sat tx */
|
|
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main LSB */
|
|
{ 1, { 0x01, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main USB */
|
|
{ 1, { 0x02, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main CW */
|
|
{ 1, { 0x03, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main CWR */
|
|
{ 1, { 0x04, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main AM */
|
|
{ 1, { 0x08, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main FM */
|
|
{ 1, { 0x82, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main CWN */
|
|
{ 1, { 0x83, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main CWRN */
|
|
{ 1, { 0x84, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main AMN */
|
|
{ 1, { 0x88, 0x00, 0x00, 0x00, 0x07 } }, /* mode set main FMN */
|
|
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x17 } }, /* mode set sat rx LSB */
|
|
{ 1, { 0x01, 0x00, 0x00, 0x00, 0x17 } }, /* mode set sat rx USB */
|
|
{ 1, { 0x02, 0x00, 0x00, 0x00, 0x17 } }, /* mode set sat rx CW */
|
|
{ 1, { 0x03, 0x00, 0x00, 0x00, 0x17 } }, /* mode set sat rx CWR */
|
|
{ 1, { 0x04, 0x00, 0x00, 0x00, 0x17 } }, /* mode set sat rx AM */
|
|
{ 1, { 0x08, 0x00, 0x00, 0x00, 0x17 } }, /* mode set sat rx FM */
|
|
{ 1, { 0x82, 0x00, 0x00, 0x00, 0x17 } }, /* mode set sat rx CWN */
|
|
{ 1, { 0x83, 0x00, 0x00, 0x00, 0x17 } }, /* mode set sat rx CWRN */
|
|
{ 1, { 0x84, 0x00, 0x00, 0x00, 0x17 } }, /* mode set sat rx AMN */
|
|
{ 1, { 0x88, 0x00, 0x00, 0x00, 0x17 } }, /* mode set sat rx FMN */
|
|
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x27 } }, /* mode set sat tx LSB */
|
|
{ 1, { 0x01, 0x00, 0x00, 0x00, 0x27 } }, /* mode set sat tx USB */
|
|
{ 1, { 0x02, 0x00, 0x00, 0x00, 0x27 } }, /* mode set sat tx CW */
|
|
{ 1, { 0x03, 0x00, 0x00, 0x00, 0x27 } }, /* mode set sat tx CWR */
|
|
{ 1, { 0x04, 0x00, 0x00, 0x00, 0x27 } }, /* mode set sat tx AM */
|
|
{ 1, { 0x08, 0x00, 0x00, 0x00, 0x27 } }, /* mode set sat tx FM */
|
|
{ 1, { 0x82, 0x00, 0x00, 0x00, 0x27 } }, /* mode set sat tx CWN */
|
|
{ 1, { 0x83, 0x00, 0x00, 0x00, 0x27 } }, /* mode set sat tx CWRN */
|
|
{ 1, { 0x84, 0x00, 0x00, 0x00, 0x27 } }, /* mode set sat tx AMN */
|
|
{ 1, { 0x88, 0x00, 0x00, 0x00, 0x27 } }, /* mode set sat tx FMN */
|
|
|
|
{ 1, { 0x0a, 0x00, 0x00, 0x00, 0x0a } }, /* set DCS on, main */
|
|
{ 1, { 0x2a, 0x00, 0x00, 0x00, 0x0a } }, /* set CTCSS/DCS enc/dec on, main */
|
|
{ 1, { 0x4a, 0x00, 0x00, 0x00, 0x0a } }, /* set CTCSS/DCS enc on, main */
|
|
{ 1, { 0x8a, 0x00, 0x00, 0x00, 0x0a } }, /* set CTCSS/DCS off, main */
|
|
|
|
{ 1, { 0x0a, 0x00, 0x00, 0x00, 0x1a } }, /* set DCS on, sat rx */
|
|
{ 1, { 0x2a, 0x00, 0x00, 0x00, 0x1a } }, /* set CTCSS/DCS enc/dec on, sat rx */
|
|
{ 1, { 0x4a, 0x00, 0x00, 0x00, 0x1a } }, /* set CTCSS/DCS enc on, sat rx */
|
|
{ 1, { 0x8a, 0x00, 0x00, 0x00, 0x1a } }, /* set CTCSS/DCS off, sat rx */
|
|
|
|
{ 1, { 0x0a, 0x00, 0x00, 0x00, 0x2a } }, /* set DCS on, sat tx */
|
|
{ 1, { 0x2a, 0x00, 0x00, 0x00, 0x2a } }, /* set CTCSS/DCS enc/dec on, sat tx */
|
|
{ 1, { 0x4a, 0x00, 0x00, 0x00, 0x2a } }, /* set CTCSS/DCS enc on, sat tx */
|
|
{ 1, { 0x8a, 0x00, 0x00, 0x00, 0x2a } }, /* set CTCSS/DCS off, sat tx */
|
|
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x0b } }, /* set CTCSS freq, main */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x1b } }, /* set CTCSS freq, sat rx */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x2b } }, /* set CTCSS freq, sat tx */
|
|
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x0c } }, /* set DCS code, main */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x1c } }, /* set DCS code, sat rx */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x2c } }, /* set DCS code, sat tx */
|
|
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x09 } }, /* set RPT shift MINUS */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x49 } }, /* set RPT shift PLUS */
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0x89 } }, /* set RPT shift SIMPLEX */
|
|
|
|
{ 0, { 0x00, 0x00, 0x00, 0x00, 0xf9 } }, /* set RPT offset freq */
|
|
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0xe7 } }, /* get RX status */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0xf7 } }, /* get TX status */
|
|
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x03 } }, /* get FREQ and MODE status, main */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x13 } }, /* get FREQ and MODE status, sat rx */
|
|
{ 1, { 0x00, 0x00, 0x00, 0x00, 0x23 } }, /* get FREQ and MODE status, sat tx */
|
|
|
|
};
|
|
|
|
|
|
/*
|
|
* Receiver caps
|
|
*/
|
|
|
|
|
|
#define FT847_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
|
|
#define FT847_SSB_CW_RX_MODES (RIG_MODE_CW|RIG_MODE_SSB)
|
|
#define FT847_AM_FM_RX_MODES (RIG_MODE_AM|RIG_MODE_FM)
|
|
|
|
/* tx doesn't have WFM.
|
|
* 100W in 160-6m (25 watts AM carrier)
|
|
* 50W in 2m/70cm (12.5 watts AM carrier)
|
|
*/
|
|
|
|
#define FT847_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
|
|
#define FT847_AM_TX_MODES (RIG_MODE_AM)
|
|
|
|
#define FT847_FUNC_ALL (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN) /* fix */
|
|
|
|
/*
|
|
* ft847 rigs capabilities.
|
|
* Notice that some rigs share the same functions.
|
|
* Also this struct is READONLY!
|
|
*/
|
|
|
|
|
|
const struct rig_caps ft847_caps = {
|
|
.rig_model = RIG_MODEL_FT847,
|
|
.model_name = "FT-847",
|
|
.mfg_name = "Yaesu",
|
|
.version = "0.1.1",
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_ALPHA,
|
|
.rig_type = RIG_TYPE_TRANSCEIVER,
|
|
.ptt_type = RIG_PTT_RIG,
|
|
.dcd_type = RIG_DCD_NONE,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 4800,
|
|
.serial_rate_max = 57600,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 2,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = FT847_WRITE_DELAY,
|
|
.post_write_delay = FT847_POST_WRITE_DELAY,
|
|
.timeout = 100,
|
|
.retry = 0,
|
|
|
|
.has_get_func = RIG_FUNC_NONE,
|
|
.has_set_func = FT847_FUNC_ALL,
|
|
.has_get_level = RIG_LEVEL_NONE, /* FIXME! */
|
|
.has_set_level = RIG_LEVEL_NONE,
|
|
.has_get_parm = RIG_PARM_NONE,
|
|
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
|
|
.level_gran = {}, /* granularity */
|
|
.parm_gran = {},
|
|
.ctcss_list = NULL, /* FIXME: CTCSS/DCS list */
|
|
.dcs_list = NULL,
|
|
.preamp = { RIG_DBLST_END, }, /* FIXME! */
|
|
.attenuator = { RIG_DBLST_END, },
|
|
.max_rit = Hz(9999),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = RIG_TARGETABLE_FREQ,
|
|
.transceive = RIG_TRN_OFF,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = { RIG_CHAN_END, }, /* FIXME: memory chan list: 78 */
|
|
|
|
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
|
|
.tx_range_list1 = { RIG_FRNG_END, },
|
|
.rx_range_list2 =
|
|
{ {kHz(100),MHz(30),FT847_ALL_RX_MODES,-1,-1}, /* rx range begin */
|
|
{MHz(36),MHz(76),FT847_ALL_RX_MODES,-1,-1},
|
|
{MHz(108),MHz(174),FT847_ALL_RX_MODES,-1,-1},
|
|
{MHz(420),MHz(512),FT847_ALL_RX_MODES,-1,-1},
|
|
|
|
RIG_FRNG_END, }, /* rx range end */
|
|
|
|
.tx_range_list2 =
|
|
{ {MHz(1.8),1999999,FT847_OTHER_TX_MODES,W(5),W(100)}, /* 5-100W class */
|
|
{MHz(1.8),1999999,FT847_AM_TX_MODES,W(1),W(25)}, /* 1-25W class */
|
|
|
|
{MHz(3.5),3999999,FT847_OTHER_TX_MODES,W(5),W(100)},
|
|
{MHz(3.5),3999999,FT847_AM_TX_MODES,W(1),W(25)},
|
|
|
|
{MHz(7),MHz(7.3),FT847_OTHER_TX_MODES,W(5),W(100)},
|
|
{MHz(7),MHz(7.3),FT847_AM_TX_MODES,W(1),W(25)},
|
|
|
|
{MHz(10),MHz(10.150),FT847_OTHER_TX_MODES,W(5),W(100)},
|
|
{MHz(10),MHz(10.150),FT847_AM_TX_MODES,W(1),W(25)},
|
|
|
|
{MHz(14),MHz(14.350),FT847_OTHER_TX_MODES,W(5),W(100)},
|
|
{MHz(14),MHz(14.350),FT847_AM_TX_MODES,W(1),W(25)},
|
|
|
|
{MHz(18.068),MHz(18.168),FT847_OTHER_TX_MODES,W(5),W(100)},
|
|
{MHz(18.068),MHz(18.168),FT847_AM_TX_MODES,W(1),W(25)},
|
|
|
|
{MHz(21),MHz(21.450),FT847_OTHER_TX_MODES,W(5),W(100)},
|
|
{MHz(21),MHz(21.450),FT847_AM_TX_MODES,W(1),W(25)},
|
|
|
|
{MHz(24.890),MHz(24.990),FT847_OTHER_TX_MODES,W(5),W(100)},
|
|
{MHz(24.890),MHz(24.990),FT847_AM_TX_MODES,W(1),W(25)},
|
|
|
|
{MHz(28),MHz(29.7),FT847_OTHER_TX_MODES,W(5),W(100)},
|
|
{MHz(28),MHz(29.7),FT847_AM_TX_MODES,W(1),W(25)},
|
|
|
|
{MHz(50),MHz(54),FT847_OTHER_TX_MODES,W(5),W(100)},
|
|
{MHz(50),MHz(54),FT847_AM_TX_MODES,W(1),W(25)},
|
|
|
|
{MHz(144),MHz(148),FT847_OTHER_TX_MODES,W(1),W(50)},
|
|
{MHz(144),MHz(148),FT847_AM_TX_MODES,W(1),W(12.5)},
|
|
|
|
{MHz(430),MHz(440),FT847_OTHER_TX_MODES,W(1),W(50)}, /* check range */
|
|
{MHz(430),MHz(440),FT847_AM_TX_MODES,W(1),W(12.5)},
|
|
|
|
RIG_FRNG_END, },
|
|
|
|
.tuning_steps = { {FT847_SSB_CW_RX_MODES,1}, /* normal */
|
|
{FT847_SSB_CW_RX_MODES,10}, /* fast */
|
|
{FT847_SSB_CW_RX_MODES,100}, /* faster */
|
|
|
|
|
|
{FT847_AM_FM_RX_MODES,10}, /* normal */
|
|
{FT847_AM_FM_RX_MODES,100}, /* fast */
|
|
|
|
RIG_TS_END,
|
|
},
|
|
/* mode/filter list, .remember = order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB|RIG_MODE_CW, kHz(2.2)},
|
|
{RIG_MODE_CW, Hz(500)},
|
|
{RIG_MODE_AM, kHz(9)},
|
|
{RIG_MODE_AM, kHz(2.2)},
|
|
{RIG_MODE_FM, kHz(15)},
|
|
{RIG_MODE_FM, kHz(9)},
|
|
RIG_FLT_END,
|
|
},
|
|
|
|
.priv = NULL,
|
|
.rig_init = ft847_init,
|
|
.rig_cleanup = ft847_cleanup,
|
|
.rig_open = ft847_open,
|
|
.rig_close = ft847_close,
|
|
|
|
.set_freq = ft847_set_freq, /* set freq */
|
|
.get_freq = ft847_get_freq, /* get freq */
|
|
.set_mode = ft847_set_mode, /* set mode */
|
|
.get_mode = ft847_get_mode, /* get mode */
|
|
.set_vfo = ft847_set_vfo, /* set vfo */
|
|
.get_vfo = ft847_get_vfo, /* get vfo */
|
|
.set_ptt = ft847_set_ptt, /* set ptt */
|
|
.get_ptt = ft847_get_ptt, /* get ptt */
|
|
|
|
};
|
|
|
|
/*
|
|
* Function definitions below
|
|
*/
|
|
|
|
/*
|
|
* setup *priv
|
|
* serial port is already open (rig->state->fd)
|
|
*/
|
|
|
|
int ft847_init(RIG *rig) {
|
|
struct ft847_priv_data *p;
|
|
|
|
if (!rig)
|
|
return -RIG_EINVAL;
|
|
|
|
p = (struct ft847_priv_data*)malloc(sizeof(struct ft847_priv_data));
|
|
if (!p) {
|
|
/* whoops! memory shortage! */
|
|
return -RIG_ENOMEM;
|
|
}
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847:ft847_init called \n");
|
|
|
|
/*
|
|
* Copy complete native cmd set to private cmd storage area
|
|
*/
|
|
|
|
memcpy(p->pcs,ncmd,sizeof(ncmd));
|
|
|
|
p->current_vfo = RIG_VFO_MAIN; /* default to VFO_MAIN */
|
|
rig->state.priv = (void*)p;
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
/*
|
|
* ft847_cleanup routine
|
|
* the serial port is closed by the frontend
|
|
*/
|
|
|
|
int ft847_cleanup(RIG *rig) {
|
|
if (!rig)
|
|
return -RIG_EINVAL;
|
|
|
|
if (rig->state.priv)
|
|
free(rig->state.priv);
|
|
rig->state.priv = NULL;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847:ft847_cleanup called \n");
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
/*
|
|
* ft847_open routine
|
|
*
|
|
*/
|
|
|
|
int ft847_open(RIG *rig) {
|
|
|
|
/* Good time to set CAT ON */
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847:ft847_open called \n");
|
|
|
|
ft847_send_priv_cmd(rig,FT_847_NATIVE_CAT_ON);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* ft847_close routine
|
|
*
|
|
*/
|
|
|
|
int ft847_close(RIG *rig) {
|
|
|
|
/* Good time to set CAT OFF */
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847:ft847_close called \n");
|
|
|
|
ft847_send_priv_cmd(rig,FT_847_NATIVE_CAT_OFF);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* private helper function to send a private command
|
|
* sequence . Must only be complete sequences.
|
|
*
|
|
*/
|
|
|
|
static int ft847_send_priv_cmd(RIG *rig, unsigned char ci) {
|
|
|
|
struct rig_state *rig_s;
|
|
struct ft847_priv_data *p;
|
|
unsigned char *cmd; /* points to sequence to send */
|
|
unsigned char cmd_index; /* index of sequence to send */
|
|
|
|
if (!rig)
|
|
return -RIG_EINVAL;
|
|
|
|
|
|
p = (struct ft847_priv_data*)rig->state.priv;
|
|
rig_s = &rig->state;
|
|
|
|
cmd_index = ci; /* get command */
|
|
|
|
if (! p->pcs[cmd_index].ncomp) {
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847: Attempt to send incomplete sequence \n");
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
cmd = (unsigned char *) p->pcs[cmd_index].nseq; /* get native sequence */
|
|
write_block(&rig_s->rigport, cmd, YAESU_CMD_LENGTH);
|
|
|
|
return RIG_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* Set frequency to freq Hz. Note 10 Hz resolution -- YUK -- FS
|
|
*
|
|
*/
|
|
|
|
|
|
int ft847_set_freq(RIG *rig, vfo_t vfo, freq_t freq) {
|
|
struct rig_state *rig_s;
|
|
struct ft847_priv_data *p;
|
|
unsigned char *cmd; /* points to sequence to send */
|
|
unsigned char cmd_index; /* index of sequence to send */
|
|
|
|
if (!rig)
|
|
return -RIG_EINVAL;
|
|
|
|
p = (struct ft847_priv_data*)rig->state.priv;
|
|
|
|
rig_s = &rig->state;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847: requested freq = %"PRIfreq" Hz \n", freq);
|
|
|
|
|
|
/*
|
|
* Copy native cmd freq_set to private cmd storage area
|
|
*/
|
|
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847: vfo =%s \n", rig_strvfo(vfo));
|
|
|
|
if (vfo == RIG_VFO_CURR)
|
|
vfo = p->current_vfo;
|
|
|
|
switch(vfo) {
|
|
case RIG_VFO_MAIN:
|
|
cmd_index = FT_847_NATIVE_CAT_SET_FREQ_MAIN;
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847: Unknown VFO \n");
|
|
return -RIG_EINVAL; /* sorry, wrong VFO */
|
|
}
|
|
|
|
memcpy(p->p_cmd,&ncmd[cmd_index].nseq,YAESU_CMD_LENGTH);
|
|
|
|
to_bcd_be(p->p_cmd,freq/10,8); /* store bcd format in in p_cmd */
|
|
/* TODO -- fix 10Hz resolution -- FS */
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847: requested freq after conversion = %"PRIll" Hz \n", from_bcd_be(p->p_cmd,8)* 10 );
|
|
|
|
cmd = p->p_cmd; /* get native sequence */
|
|
write_block(&rig_s->rigport, cmd, YAESU_CMD_LENGTH);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
#define MD_LSB 0x00
|
|
#define MD_USB 0x01
|
|
#define MD_CW 0x02
|
|
#define MD_CWR 0x03
|
|
#define MD_AM 0x04
|
|
#define MD_FM 0x08
|
|
#define MD_CWN 0x82
|
|
#define MD_CWNR 0x83
|
|
#define MD_AMN 0x84
|
|
#define MD_FMN 0x88
|
|
|
|
static int get_freq_and_mode(RIG *rig, vfo_t vfo, freq_t *freq, rmode_t *mode,
|
|
pbwidth_t *width) {
|
|
struct rig_state *rs = &rig->state;
|
|
struct ft847_priv_data *p;
|
|
unsigned char *cmd; /* points to sequence to send */
|
|
unsigned char cmd_index; /* index of sequence to send */
|
|
unsigned char data[8];
|
|
int n;
|
|
|
|
p = (struct ft847_priv_data*)rs->priv;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847: vfo =%s \n", rig_strvfo(vfo));
|
|
|
|
if (vfo == RIG_VFO_CURR)
|
|
vfo = p->current_vfo;
|
|
|
|
/*
|
|
* TODO:
|
|
* FT_847_NATIVE_CAT_GET_FREQ_MODE_STATUS_SAT_RX
|
|
* FT_847_NATIVE_CAT_GET_FREQ_MODE_STATUS_SAT_TX
|
|
*/
|
|
switch(vfo) {
|
|
case RIG_VFO_MAIN:
|
|
cmd_index = FT_847_NATIVE_CAT_GET_FREQ_MODE_STATUS_MAIN;
|
|
break;
|
|
|
|
default:
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847: Unknown VFO \n");
|
|
return -RIG_EINVAL; /* sorry, wrong VFO */
|
|
}
|
|
|
|
memcpy(p->p_cmd,&ncmd[cmd_index].nseq,YAESU_CMD_LENGTH);
|
|
|
|
cmd = p->p_cmd;
|
|
write_block(&rs->rigport, cmd, YAESU_CMD_LENGTH);
|
|
|
|
n = read_block(&rs->rigport, data, YAESU_CMD_LENGTH);
|
|
if (n != YAESU_CMD_LENGTH) {
|
|
rig_debug(RIG_DEBUG_ERR,"ft847: read_block returned %d\n", n);
|
|
return n < 0 ? n : -RIG_EPROTO;
|
|
}
|
|
|
|
/* Remember, this is 10Hz resolution */
|
|
*freq = 10*from_bcd_be(data, 8);
|
|
|
|
*width = RIG_PASSBAND_NORMAL;
|
|
switch (data[4]) {
|
|
case MD_LSB: *mode = RIG_MODE_LSB; break;
|
|
case MD_USB: *mode = RIG_MODE_USB; break;
|
|
|
|
case MD_CWN:
|
|
*width = rig_passband_narrow(rig, RIG_MODE_CW);
|
|
case MD_CW:
|
|
*mode = RIG_MODE_CW;
|
|
break;
|
|
|
|
case MD_CWNR:
|
|
*width = rig_passband_narrow(rig, RIG_MODE_CW);
|
|
case MD_CWR:
|
|
*mode = RIG_MODE_CWR;
|
|
break;
|
|
|
|
case MD_AMN:
|
|
*width = rig_passband_narrow(rig, RIG_MODE_AM);
|
|
case MD_AM:
|
|
*mode = RIG_MODE_AM;
|
|
break;
|
|
|
|
case MD_FMN:
|
|
*width = rig_passband_narrow(rig, RIG_MODE_FM);
|
|
case MD_FM:
|
|
*mode = RIG_MODE_FM;
|
|
break;
|
|
default:
|
|
*mode = RIG_MODE_NONE;
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847: Unknown mode %02x\n", data[4]);
|
|
}
|
|
if (*width == RIG_PASSBAND_NORMAL)
|
|
*width = rig_passband_normal(rig, *mode);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* Note taken from http://www.supercontrol.de/cat/ft847faq/page4.htm#pollingcodes
|
|
* The FT-847, as originally delivered, could not poll the radio for frequency
|
|
* and mode information. This was added beginning with the 8G05 production
|
|
* runs. The Operating Manual does not show the codes for polling the radio.
|
|
* Note that you cannot query the sub-VFO, nor can you swap VFOs via software.
|
|
*/
|
|
int ft847_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
|
|
{
|
|
rmode_t mode;
|
|
pbwidth_t width;
|
|
|
|
return get_freq_and_mode(rig, vfo, freq, &mode, &width);
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
* TODO -- add other VFO's
|
|
*
|
|
*/
|
|
|
|
int ft847_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width) {
|
|
unsigned char cmd_index; /* index of sequence to send */
|
|
struct rig_state *rs = &rig->state;
|
|
struct ft847_priv_data *p;
|
|
|
|
p = (struct ft847_priv_data*)rs->priv;
|
|
|
|
|
|
/*
|
|
* translate mode from generic to ft847 specific
|
|
*/
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847: generic mode = %x \n", mode);
|
|
|
|
if (vfo == RIG_VFO_CURR)
|
|
vfo = p->current_vfo;
|
|
|
|
if (vfo != RIG_VFO_MAIN) {
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847: unsupported VFO '%s'\n", rig_strvfo(vfo));
|
|
return -RIG_ENIMPL; /* sorry, it's in TODO list */
|
|
}
|
|
|
|
|
|
switch(mode) {
|
|
case RIG_MODE_AM:
|
|
cmd_index = FT_847_NATIVE_CAT_SET_MODE_MAIN_AM;
|
|
break;
|
|
case RIG_MODE_CW:
|
|
cmd_index = FT_847_NATIVE_CAT_SET_MODE_MAIN_CW;
|
|
break;
|
|
case RIG_MODE_USB:
|
|
cmd_index = FT_847_NATIVE_CAT_SET_MODE_MAIN_USB;
|
|
break;
|
|
case RIG_MODE_LSB:
|
|
cmd_index = FT_847_NATIVE_CAT_SET_MODE_MAIN_LSB;
|
|
break;
|
|
case RIG_MODE_FM:
|
|
cmd_index = FT_847_NATIVE_CAT_SET_MODE_MAIN_FM;
|
|
break;
|
|
default:
|
|
return -RIG_EINVAL; /* sorry, wrong MODE */
|
|
}
|
|
|
|
|
|
/*
|
|
* Now set width
|
|
*/
|
|
|
|
if (width == rig_passband_narrow(rig, mode)) {
|
|
switch(mode) {
|
|
case RIG_MODE_AM:
|
|
cmd_index = FT_847_NATIVE_CAT_SET_MODE_MAIN_AMN;
|
|
break;
|
|
case RIG_MODE_FM:
|
|
cmd_index = FT_847_NATIVE_CAT_SET_MODE_MAIN_FMN;
|
|
break;
|
|
case RIG_MODE_CW:
|
|
cmd_index = FT_847_NATIVE_CAT_SET_MODE_MAIN_CWN;
|
|
break;
|
|
case RIG_MODE_USB:
|
|
case RIG_MODE_LSB:
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"%s: unsupported mode/width: %s/%d, narrow: %d\n",
|
|
__FUNCTION__, rig_strrmode(mode), width,
|
|
rig_passband_narrow(rig, mode));
|
|
return -RIG_EINVAL; /* sorry, wrong MODE/WIDTH combo */
|
|
}
|
|
} else {
|
|
if (width != RIG_PASSBAND_NORMAL &&
|
|
width != rig_passband_normal(rig, mode)) {
|
|
return -RIG_EINVAL; /* sorry, wrong MODE/WIDTH combo */
|
|
}
|
|
}
|
|
/*
|
|
* Now send the command
|
|
*/
|
|
|
|
ft847_send_priv_cmd(rig,cmd_index);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
int ft847_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width) {
|
|
freq_t freq;
|
|
|
|
return get_freq_and_mode(rig, vfo, &freq, mode, width);
|
|
}
|
|
|
|
|
|
/*
|
|
* TODO -- FT847 has NO set_vfo cmd. VFO is specified
|
|
* in other cmd's like set freq, set mode etc..
|
|
*
|
|
* For the time being, simply cache the requested
|
|
* VFO in private active VFO
|
|
* Must fix this later. MAybe store active VFO in
|
|
* frontend instead ?
|
|
*
|
|
* Perhaps I can try a dummy cmd that includes the VFO..
|
|
* eg: set_dcs etc..
|
|
* Try later -- FS
|
|
*
|
|
*
|
|
* Also, RIG can handle only VFO_MAIN . Add SAT VFO's later.
|
|
*
|
|
*/
|
|
|
|
int ft847_set_vfo(RIG *rig, vfo_t vfo) {
|
|
struct rig_state *rig_s;
|
|
struct ft847_priv_data *p;
|
|
|
|
if (!rig)
|
|
return -RIG_EINVAL;
|
|
|
|
p = (struct ft847_priv_data*)rig->state.priv;
|
|
rig_s = &rig->state;
|
|
|
|
|
|
/*
|
|
* TODO : check for errors -- FS
|
|
*/
|
|
|
|
switch(vfo) {
|
|
case RIG_VFO_CURR:
|
|
return 0; /* easy! */
|
|
|
|
case RIG_VFO_MAIN:
|
|
p->current_vfo = vfo; /* update active VFO */
|
|
break;
|
|
default:
|
|
return -RIG_EINVAL; /* sorry, wrong VFO */
|
|
}
|
|
|
|
|
|
|
|
return RIG_OK;
|
|
|
|
}
|
|
|
|
int ft847_get_vfo(RIG *rig, vfo_t *vfo) {
|
|
|
|
return -RIG_ENIMPL;
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* _set_ptt
|
|
*
|
|
*/
|
|
|
|
|
|
int ft847_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt) {
|
|
unsigned char cmd_index; /* index of sequence to send */
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE,"ft847:ft847_set_ptt called \n");
|
|
|
|
switch(ptt) {
|
|
case RIG_PTT_ON:
|
|
cmd_index = FT_847_NATIVE_CAT_PTT_ON;
|
|
break;
|
|
case RIG_PTT_OFF:
|
|
cmd_index = FT_847_NATIVE_CAT_PTT_OFF;
|
|
break;
|
|
default:
|
|
return -RIG_EINVAL; /* sorry, wrong ptt range */
|
|
}
|
|
|
|
/*
|
|
* phew! now send cmd to rig
|
|
*/
|
|
|
|
ft847_send_priv_cmd(rig,cmd_index);
|
|
|
|
return RIG_OK; /* good */
|
|
|
|
}
|
|
|
|
int ft847_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt) {
|
|
return -RIG_ENIMPL;
|
|
|
|
}
|
|
|