Hamlib/prm80/prm8060.c

139 wiersze
3.4 KiB
C

/*
* Hamlib PRM80 backend - PRM8060 description
* Copyright (c) 2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h>
#include "hamlib/rig.h"
#include "idx_builtin.h"
#include "prm80.h"
#define PRM8060_ALL_MODES (RIG_MODE_FM)
#define PRM8060_FUNC (RIG_FUNC_NONE)
#define PRM8060_LEVEL_ALL (RIG_LEVEL_AF|RIG_LEVEL_SQL)
#define PRM8060_PARM_ALL (RIG_PARM_NONE)
#define PRM8060_VFO_OPS (RIG_OP_NONE)
#define PRM8060_VFO (RIG_VFO_MEM)
/*
* PRM 8060 rig capabilities.
* http://prm80.sourceforge.net/
*
*/
const struct rig_caps prm8060_caps = {
.rig_model = RIG_MODEL_PRM8060,
.model_name = "PRM8060",
.mfg_name = "Philips/Simoco",
.version = "0.1",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 7,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_SPACE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 2000,
.retry = 3,
.has_get_func = PRM8060_FUNC,
.has_set_func = PRM8060_FUNC,
.has_get_level = PRM8060_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(PRM8060_LEVEL_ALL),
.has_get_parm = PRM8060_PARM_ALL,
.has_set_parm = RIG_PARM_SET(PRM8060_PARM_ALL),
.vfo_ops = PRM8060_VFO_OPS,
.preamp = { RIG_DBLST_END },
.attenuator = { RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 0, 99, RIG_MTYPE_MEM, PRM80_MEM_CAP },
RIG_CHAN_END,
},
.rx_range_list1 = {
{MHz(144),MHz(146)-kHz(12.5),PRM8060_ALL_MODES,-1,-1,PRM8060_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = {
{MHz(144),MHz(146)-kHz(12.5),PRM8060_ALL_MODES,W(5),W(25),PRM8060_VFO},
RIG_FRNG_END,
},
.rx_range_list2 = {
{MHz(144),MHz(148)-kHz(12.5),PRM8060_ALL_MODES,-1,-1,PRM8060_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = {
{MHz(144),MHz(148)-kHz(12.5),PRM8060_ALL_MODES,W(5),W(25),PRM8060_VFO},
RIG_FRNG_END,
},
.tuning_steps = {
{PRM8060_ALL_MODES,kHz(12.5)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
/* rough guesses */
{PRM8060_ALL_MODES, kHz(12.5)},
RIG_FLT_END,
},
.set_freq = prm80_set_freq,
.get_freq = prm80_get_freq,
.set_channel = prm80_set_channel,
.get_channel = prm80_get_channel,
.set_mem = prm80_set_mem,
.get_mem = prm80_get_mem,
.set_level = prm80_set_level,
.get_level = prm80_get_level,
.reset = prm80_reset,
.get_info = prm80_get_info,
};
/*
* Function definitions below
*/