Hamlib/aor
Stéphane Fillod, F8CFE 56431cada6 implemented scanning
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@2319 7ae35d74-ebe9-4afe-98af-79ac388436b8
2008-04-11 17:10:45 +00:00
..
Makefile.am added AR2700 & AR8600 2005-04-20 14:48:49 +00:00
README.aor
README.ar5000 SM6PPS mods for AOR 5000a 2006-11-02 15:19:58 +00:00
README.ar7030 initial release, from Fritz DC9RP 2005-03-18 16:38:15 +00:00
aor.c implemented scanning 2008-04-11 17:10:45 +00:00
aor.h implemented scanning 2008-04-11 17:10:45 +00:00
ar2700.c implemented scanning 2008-04-11 17:10:45 +00:00
ar3000.c - Fixed type mismatches and unhandled switch cases. 2006-10-07 21:10:11 +00:00
ar3030.c - Fixed type mismatches and unhandled switch cases. 2006-10-07 21:10:11 +00:00
ar5000.c implemented scanning 2008-04-11 17:10:45 +00:00
ar7030.c - Fixed type mismatches and unhandled switch cases. 2006-10-07 21:10:11 +00:00
ar8000.c implemented scanning 2008-04-11 17:10:45 +00:00
ar8200.c implemented scanning 2008-04-11 17:10:45 +00:00
ar8600.c implemented scanning 2008-04-11 17:10:45 +00:00

README.ar7030

hamlib-1.2.3 aor ar7030.c

2004.11.26

Parameteraenderung fuer USB-Serial
//.post_write_delay =  0,   //Device: /dev/ttyS0
//.post_write_delay =  85,  //Device: /dev/tts/USB0 < 85 sec 'timedout after 0 chars'

Befehle mit rigctl
# rigctl -m 503 -r /dev/ttyS0
# rigctl -m 503 -r /dev/tts/USB0

Rig command: F               Frequency:   0 .. 32016718 Hz

Rig command: f
Rig command: \get_freq

Rig command: M               Mode:        FM, AMS, AM, USB, LSB, CW, RTTY
                             Passband:    1 - 6

Rig command: m               Passband:    800, 2100, 3700, 5200, 9500, XXXX (Value from RX) Hz

Rig command: L
  Level: AF                  Value: 0.0 - 1.0
  Level: RF                  Value: 0.1, 0.0 -0.1, -0.2, -0.3, -0.4  >  +10, 0 ,-10 , -20, -30, -40 dB
  Level: SQL                 Value: 0.0 - 1.0
  Level: AGC                 Value: 0 > OFF, 2 > FAST, 3 > SLOW, 5 > MEDIUM
  Level: CWPITCH             Value: -4248 .. 0 .. 4215 Hz


Rig command: l
  Level: AF
  Level: RF
  Level: SQL
  Level: AGC
  Level: CWPITCH
  Level: RAWSTR
  Level: STRENGTH            Value: -121dBm ... -23dBm > S1 ... S9 + 50 dB 

Rig command: \set_powerstat  Status: 0 > Power off, 1 > Power on

Rig command: \get_powerstat

Rig command: \reset          Reset: 1 > Software reset

Rig command:                 Quitt Q q

Rig command:                 Quitt Q Q

Rig command: 1               Caps dump for model 503

Friedrich Melchert (DC9RP)