mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
Hamlib/rigs/jrc/nrd545.c

218 wiersze
6.4 KiB
C
Czysty Wina Historia

/*
* Hamlib JRC backend - NRD-545 DSP description
* Copyright (c) 2001-2004 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <stdlib.h>
#include <hamlib/rig.h>
#include "idx_builtin.h"
#include "jrc.h"
#define NRD545_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_AMS|RIG_MODE_ECSS)
#define NRD545_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_LOCK|RIG_FUNC_BC|RIG_FUNC_NR|RIG_FUNC_MN)
#define NRD545_LEVEL (RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH|RIG_LEVEL_ATT|RIG_LEVEL_RF|RIG_LEVEL_AF|RIG_LEVEL_AGC|RIG_LEVEL_IF|RIG_LEVEL_NR|RIG_LEVEL_NOTCHF|RIG_LEVEL_SQL|RIG_LEVEL_IF|RIG_LEVEL_CWPITCH) /*RIG_LEVEL_BWC*/
/* FIXME: add more from "U" command */
#define NRD545_PARM (RIG_PARM_TIME|RIG_PARM_BACKLIGHT|RIG_PARM_BEEP)
#define NRD545_VFO (RIG_VFO_VFO|RIG_VFO_MEM)
/*
* FIXME: measure S-meter levels
*/
#define NRD545_STR_CAL { 16, { \
{ 0, -60 }, \
{ 36, -48 }, \
{ 42, -42 }, \
{ 48, -36 }, \
{ 55, -30 }, \
{ 60, -24 }, \
{ 67, -18 }, \
{ 72, -12 }, \
{ 78, -6 }, \
{ 87, 0 }, \
{ 107, 10 }, \
{ 126, 20 }, \
{ 146, 30 }, \
{ 164, 40 }, \
{ 186, 50 }, \
{ 255, 60 }, \
} }
/*
* channel caps.
*/
#define NRD545_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.levels = RIG_LEVEL_ATT|RIG_LEVEL_AGC, \
}
static const struct jrc_priv_caps nrd545_priv_caps =
{
.max_freq_len = 10,
.info_len = 18,
.mem_len = 21,
.pbs_info_len = 6,
.pbs_len = 3,
.beep = 100,
.beep_len = 3,
.cw_pitch = "U14"
};
/*
* NRD-545 rig capabilities.
*
*/
const struct rig_caps nrd545_caps =
{
RIG_MODEL(RIG_MODEL_NRD545),
.model_name = "NRD-545 DSP",
.mfg_name = "JRC",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = NRD545_FUNC,
.has_set_func = NRD545_FUNC,
.has_get_level = NRD545_LEVEL,
.has_set_level = RIG_LEVEL_SET(NRD545_LEVEL),
.has_get_parm = RIG_PARM_TIME,
.has_set_parm = RIG_PARM_SET(NRD545_PARM),
.level_gran = {
// cppcheck-suppress *
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_ATT] = { .min = { .i = 0 }, .max = { .i = 20 } },
[LVL_IF] = { .min = { .i = -2550 }, .max = { .i = 2550 }, .step = { .i = 10} },
[LVL_NOTCHF] = { .min = { .i = -1023 }, .max = { .i = 1023 } },
[LVL_CWPITCH] = { .min = { .i = -2550 }, .max = { .i = 2550 } },
/*[LVL_BWC] = { .min = { .i = 10 }, .max = { .i = 9990 }, .step = { .i = 10} },*/
},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END },
.attenuator = { 20, RIG_DBLST_END }, /* To be confirmed */
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = kHz(2.3),
.targetable_vfo = 0,
.transceive = RIG_TRN_RIG,
.vfo_ops = RIG_OP_FROM_VFO | RIG_OP_UP | RIG_OP_DOWN,
.scan_ops = RIG_SCAN_STOP | RIG_SCAN_SLCT,
.bank_qty = 0,
.chan_desc_sz = 0,
.priv = (void *)& nrd545_priv_caps,
.chan_list = {
{ 0, 999, RIG_MTYPE_MEM, NRD545_MEM_CAP },
RIG_CHAN_END,
},
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(100), MHz(30), NRD545_MODES, -1, -1, NRD545_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{NRD545_MODES, 1},
{NRD545_MODES, 10},
{NRD545_MODES, 100},
{NRD545_MODES, kHz(1)},
{NRD545_MODES, kHz(5)},
{NRD545_MODES, kHz(6.25)},
{NRD545_MODES, kHz(9)},
{NRD545_MODES, kHz(10)},
{NRD545_MODES, kHz(12.5)},
{NRD545_MODES, kHz(20)},
{NRD545_MODES, kHz(25)},
{NRD545_MODES, kHz(30)},
{NRD545_MODES, kHz(100)},
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{RIG_MODE_AM | RIG_MODE_AMS | RIG_MODE_ECSS | RIG_MODE_FM, kHz(10)},
{RIG_MODE_AM | RIG_MODE_AMS | RIG_MODE_ECSS | RIG_MODE_FM, kHz(4.5)},
{RIG_MODE_SSB | RIG_MODE_RTTY, kHz(2.4)},
{RIG_MODE_SSB | RIG_MODE_RTTY, kHz(1)},
{RIG_MODE_SSB | RIG_MODE_RTTY, kHz(4.5)},
{RIG_MODE_CW, kHz(1)},
{RIG_MODE_CW, kHz(2.4)},
RIG_FLT_END,
},
.str_cal = NRD545_STR_CAL,
.rig_open = jrc_open,
.rig_close = jrc_close,
.set_freq = jrc_set_freq,
.get_freq = jrc_get_freq,
.set_mode = jrc_set_mode,
.get_mode = jrc_get_mode,
.set_vfo = jrc_set_vfo,
.set_func = jrc_set_func,
.get_func = jrc_get_func,
.set_level = jrc_set_level,
.get_level = jrc_get_level,
.set_parm = jrc_set_parm,
.get_parm = jrc_get_parm,
.get_dcd = jrc_get_dcd,
.set_trn = jrc_set_trn,
.reset = jrc_reset,
.set_mem = jrc_set_mem,
.get_mem = jrc_get_mem,
.set_channel = jrc_set_chan,
.get_channel = jrc_get_chan,
.vfo_op = jrc_vfo_op,
.scan = jrc_scan,
.set_powerstat = jrc_set_powerstat,
.get_powerstat = jrc_get_powerstat,
.decode_event = jrc_decode_event,
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};
/*
* Function definitions below
*/
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik