Hamlib/yaesu/ft747.h

243 wiersze
5.7 KiB
C

/*
* hamlib - (C) Frank Singleton 2000 (vk3fcs@@ix.netcom.com)
*
* ft747.h - (C) Frank Singleton 2000 (vk3fcs@@ix.netcom.com)
* This shared library provides an API for communicating
* via serial interface to an FT-747GX using the "CAT" interface
* box (FIF-232C) or similar (max232 + some capacitors :-)
*
*
* $Id: ft747.h,v 1.4 2002-12-01 03:08:05 n0nb Exp $
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef _FT747_H
#define _FT747_H 1
#define FT747_STATUS_UPDATE_DATA_LENGTH 345
#define FT747_PACING_INTERVAL 5
#define FT747_PACING_DEFAULT_VALUE 0
#define FT747_WRITE_DELAY 50
/* Sequential fast writes confuse my FT747 without this delay */
#define FT747_POST_WRITE_DELAY 5
/* Rough safe value for default timeout */
#define FT747_DEFAULT_READ_TIMEOUT 345 * ( 3 + (FT747_PACING_INTERVAL * FT747_PACING_DEFAULT_VALUE))
/*
* 8N2 and 1 start bit = 11 bits at 4800 bps => effective byte rate = 1 byte in 2.2917 msec
* => 345 bytes in 790 msec
*
* delay for 1 byte = 2.2917 + (pace_interval * 5)
*
* pace_interval time to read 345 bytes
* ------------ ----------------------
*
* 0 790 msec
* 1 2515 msec
* 2 4240 msec
* 255 441 sec => 7 min 21 seconds
*
*/
/*
* Native FT747 functions. This is what I have to work with :-)
*
*/
enum ft747_native_cmd_e {
FT_747_NATIVE_SPLIT_OFF = 0,
FT_747_NATIVE_SPLIT_ON,
FT_747_NATIVE_RECALL_MEM,
FT_747_NATIVE_VFO_TO_MEM,
FT_747_NATIVE_DLOCK_OFF,
FT_747_NATIVE_DLOCK_ON,
FT_747_NATIVE_VFO_A,
FT_747_NATIVE_VFO_B,
FT_747_NATIVE_M_TO_VFO,
FT_747_NATIVE_UP_500K,
FT_747_NATIVE_DOWN_500K,
FT_747_NATIVE_CLARIFY_OFF,
FT_747_NATIVE_CLARIFY_ON,
FT_747_NATIVE_FREQ_SET,
FT_747_NATIVE_MODE_SET_LSB,
FT_747_NATIVE_MODE_SET_USB,
FT_747_NATIVE_MODE_SET_CWW,
FT_747_NATIVE_MODE_SET_CWN,
FT_747_NATIVE_MODE_SET_AMW,
FT_747_NATIVE_MODE_SET_AMN,
FT_747_NATIVE_MODE_SET_FMW,
FT_747_NATIVE_MODE_SET_FMN,
FT_747_NATIVE_PACING,
FT_747_NATIVE_PTT_OFF,
FT_747_NATIVE_PTT_ON,
FT_747_NATIVE_UPDATE,
FT_747_NATIVE_SIZE /* end marker, value indicates number of */
/* native cmd entries */
};
typedef enum ft747_native_cmd_e ft747_native_cmd_t;
/* Internal MODES - when setting modes via cmd_mode_set() */
#define MODE_SET_LSB 0x00
#define MODE_SET_USB 0x01
#define MODE_SET_CWW 0x02
#define MODE_SET_CWN 0x03
#define MODE_SET_AMW 0x04
#define MODE_SET_AMN 0x05
#define MODE_SET_FMW 0x06
#define MODE_SET_FMN 0x07
/*
* Mode Bitmap. Bits 5 and 6 unused
* When READING modes
*/
#define MODE_FM 0x01
#define MODE_AM 0x02
#define MODE_CW 0x04
#define MODE_FMN 0x81
#define MODE_AMN 0x82
#define MODE_CWN 0x84
#define MODE_USB 0x08
#define MODE_LSB 0x10
#define MODE_NAR 0x80
/* All relevent bits */
#define MODE_MASK 0x9f
/*
* Status Flag Masks when reading
*/
#define SF_DLOCK 0x01
#define SF_SPLIT 0x02
#define SF_CLAR 0x04
#define SF_VFOAB 0x08
#define SF_VFOMR 0x10
#define SF_RXTX 0x20
#define SF_RESV 0x40
#define SF_PRI 0x80
/*
* Local VFO CMD's, according to spec
*/
#define FT747_VFO_A 0x00
#define FT747_VFO_B 0x01
/*
* Some useful offsets in the status update map (offset)
*
* Manual appears to be full of mistakes regarding offsets etc.. -- FS
*
*/
#define FT747_SUMO_DISPLAYED_MODE 0x18
#define FT747_SUMO_DISPLAYED_STATUS 0x00
#define FT747_SUMO_DISPLAYED_FREQ 0x01
#define FT747_SUMO_VFO_A_FREQ 0x09
#define FT747_SUMO_VFO_B_FREQ 0x11
/*
* API local implementation
*/
int ft747_init(RIG *rig);
int ft747_cleanup(RIG *rig);
int ft747_open(RIG *rig);
int ft747_close(RIG *rig);
int ft747_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
int ft747_get_freq(RIG *rig, vfo_t vfo, freq_t *freq);
int ft747_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width); /* select mode */
int ft747_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width); /* get mode */
int ft747_set_vfo(RIG *rig, vfo_t vfo); /* select vfo */
int ft747_get_vfo(RIG *rig, vfo_t *vfo); /* get vfo */
int ft747_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt);
int ft747_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt);
/*
* Below is leftovers of old interface. TODO
*
*/
#if 0
/*
* Allow TX commands to be disabled
*
*/
#undef TX_ENABLED
/*
* Mode Bitmap. Bits 5 and 6 unused
* When reading modes
*/
#define MODE_FM 0x01
#define MODE_AM 0x02
#define MODE_CW 0x04
#define MODE_FMN 0x81
#define MODE_AMN 0x82
#define MODE_CWN 0x84
#define MODE_USB 0x08
#define MODE_LSB 0x10
#define MODE_NAR 0x80 /* narrow bit set only */
/*
* Map band data value to band.
*
* Band "n" is from band_data[n] to band_data[n+1]
*/
const float band_data[11] = { 0.0, 0.1, 2.5, 4.0, 7.5, 10.5, 14.5, 18.5, 21.5, 25.0, 30.0 };
#endif
#endif /* _FT747_H */