Hamlib/icom/icr71.c

142 wiersze
3.6 KiB
C

/*
* Hamlib CI-V backend - description of IC-R71
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "icom.h"
/* FM optional */
#define ICR71_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define ICR71_FUNC_ALL (RIG_FUNC_NONE)
#define ICR71_LEVEL_ALL (RIG_LEVEL_NONE)
#define ICR71_VFO_ALL (RIG_VFO_A|RIG_VFO_MEM)
#define ICR71_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO)
#define ICR71_SCAN_OPS (RIG_SCAN_NONE)
static const struct icom_priv_caps icr71_priv_caps = {
0x1a, /* default address */
0, /* 731 mode */
ic737_ts_sc_list /* none actually */
};
const struct rig_caps icr71_caps = {
.rig_model = RIG_MODEL_ICR71,
.model_name = "IC-R71",
.mfg_name = "Icom",
.version = BACKEND_VER,
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 1200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = ICR71_FUNC_ALL,
.has_set_func = ICR71_FUNC_ALL,
.has_get_level = ICR71_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(ICR71_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = ICR71_VFO_OPS,
.scan_ops = ICR71_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM, IC_MIN_MEM_CAP },
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(100),MHz(30),ICR71_MODES,-1,-1,ICR71_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(100),MHz(30),ICR71_MODES,-1,-1,ICR71_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list2 = { RIG_FRNG_END, },
.tuning_steps = {
{ICR71_MODES,Hz(10)}, /* resolution */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.3)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(15)}, /* optional w/ IC-EX257 unit */
RIG_FLT_END,
},
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&icr71_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
};