..
Android.mk
Append the missing information to build hamlib v4.3 for Android NDK
2021-09-13 09:28:54 -05:00
Makefile.am
Move hamlibdatetime.h generation to src directory
2021-03-19 23:14:13 -05:00
amp_conf.c
Rename macros to avoid collisions with other software
2021-03-06 12:37:53 -06:00
amp_conf.h
Add first cut at amplifier control
2019-06-12 15:52:35 -05:00
amp_reg.c
Documentation updates
2020-04-09 23:35:22 -05:00
amp_settings.c
Update Doxygen comments in
2021-04-07 11:08:02 -05:00
amplifier.c
Update Doxygen comments in
2021-04-07 11:08:02 -05:00
cal.c
Update Doxygen comments
2021-05-18 19:00:00 -05:00
cal.h
Add new levels: RFPOWER_METER, COMP_METER, VD_METER and ID_METER, supported at least by most of recent Icom rigs. Add level NOTCHF_RAW for manual notch frequency without specified unit for Icom rigs. Add level MONITOR_GAIN. Add functions DUAL_WATCH and DIVERSITY, supported now by K3/K3S. Fix VOXDELAY level commands for many Icom rigs. Add MONITOR_GAIN level for Icom rigs. Fix and add many K3 commands and add specific rig models for K3S, KX2 and KX3 -- they are very similar to K3, but have slight differences. Extend dump_caps output for rigctl: add complete details of ext levels and frequency ranges. Tests have been performed on IC-7000, IC-756ProIII, IC-7300, IC-7600 and K3.
2019-05-30 09:37:49 +03:00
cm108.c
Update Doxygen comments
2021-05-18 22:42:17 -05:00
cm108.h
Reformatted src directory
2017-08-09 06:14:31 -05:00
conf.c
Rename macros to avoid collisions with other software
2021-03-06 12:37:53 -06:00
debug.c
Move date_strget to misc.c
2021-05-21 12:33:42 -05:00
event.c
astyle all files preparing for 4.3 release
2021-08-26 06:49:24 -05:00
event.h
Update LGPL header in src source files.
2011-08-22 21:38:37 -05:00
ext.c
Implement funcs, levels and parms + the ext variants for rotators. Add option to not change rotator speed when using the move command. Add rotator status flags. Work in progress.
2020-11-24 21:51:10 +02:00
extamp.c
Update and refine Doxygen comments for extension levels, etc.
2021-02-21 13:07:45 -06:00
gpio.c
Rename macros to avoid collisions with other software
2021-03-06 12:37:53 -06:00
gpio.h
Add GPIO and GPION options for DCD.
2018-03-29 23:55:25 +02:00
hamlibdatetime.h.in
Move hamlibdatetime.h generation to src directory
2021-03-19 23:14:13 -05:00
idx_builtin.h
Add SPECTRUM_ATT level (also supported by Kenwood rigs). Get VFO frequency for Icom spectrum edge ranges (if not cached). Fix preamp levels based on docs. Add supported AGC levels to recent Icom rigs.
2021-05-27 10:12:01 +03:00
iofunc.c
Improve ser_open error message
2021-08-30 10:01:36 -05:00
iofunc.h
remove some cppcheck statements not needed anymore
2020-10-29 12:52:54 -05:00
locator.c
Update Doxygen comments and main page
2021-05-16 21:10:31 -05:00
mem.c
Rename macros to avoid collisions with other software
2021-03-06 12:37:53 -06:00
microham.c
astyle files
2021-02-28 09:46:01 -06:00
microham.h
Add uh_wkey_close to microham.h
2020-01-13 07:27:41 -06:00
misc.c
Fix compilation of misc.c with gmtime_r replacement function for mingw
2021-09-13 09:28:53 -05:00
misc.h
Fix Icom split and implement reverse split
2021-08-02 23:37:31 -05:00
network.c
astyle all files preparing for 4.3 release
2021-08-26 06:49:24 -05:00
network.h
Add multicast_item_e and change multicast_server API
2021-05-23 07:40:08 -05:00
neverused.c
clean up cppcheck warnings
2020-10-25 16:30:09 -05:00
par_nt.h
Formatted src/ to final coding guidelines
2017-10-04 21:32:08 -05:00
parallel.c
Fix some of the documentation
2020-04-09 17:56:19 -05:00
parallel.h
remove some cppcheck statements not needed anymore
2020-10-29 12:52:54 -05:00
register.c
astyle all files preparing for 4.3 release
2021-08-26 06:49:24 -05:00
register.h
Fix cppcheck warning in register.h
2019-12-19 09:40:14 -06:00
rig.c
Do not do vfo_fixup on satmode rigs
2021-09-13 09:28:53 -05:00
rot_conf.c
Rename macros to avoid collisions with other software
2021-03-06 12:37:53 -06:00
rot_conf.h
Update LGPL header in src source files.
2011-08-22 21:38:37 -05:00
rot_ext.c
Update and refine Doxygen comments for extension levels, etc.
2021-02-21 13:07:45 -06:00
rot_reg.c
Add Radant AZV-1 Rotator controller protocol.
2021-04-09 19:19:08 +03:00
rot_settings.c
Update Doxygen comments in
2021-04-07 11:08:02 -05:00
rotator.c
Add 2nd rotator port to rotator_open for RT21 elevation controller
2021-07-23 23:07:18 -05:00
serial.c
astyle all files preparing for 4.3 release
2021-08-26 06:49:24 -05:00
serial.h
Update LGPL header in src source files.
2011-08-22 21:38:37 -05:00
settings.c
Change RIG_TARGETABLE_PURE to appropriate RIG_TARGETABLE -- might actually work now
2021-01-03 22:52:56 -06:00
sleep.c
Fix sleep.c #endif
2020-07-04 12:05:17 -05:00
sleep.h
Fix MSVC compile by removing unistd.h and defining our own rig_useconds_t
2020-06-13 17:40:47 -05:00
sprintflst.c
astyle all files preparing for 4.3 release
2021-08-26 06:49:24 -05:00
sprintflst.h
Fix get_rig_conf_type export
2021-06-04 09:59:31 -05:00
token.h
Add auto_power_off option from JTDX team
2021-03-02 13:03:30 -06:00
tones.c
Add ctcss_list and dcs_list to rigctld so rigcctld caps reflects the connected rig
2021-04-29 10:49:29 -05:00
tones.h
Clean up mingw compiler warning for tones.h
2021-04-29 17:16:51 -05:00
usb_port.c
Fix macro in usb_port.c
2021-03-06 16:56:22 -06:00
usb_port.h
Update LGPL header in src source files.
2011-08-22 21:38:37 -05:00