Hamlib/tentec/argonaut.c

163 wiersze
4.2 KiB
C

/*
* Hamlib TenTenc backend - TT-516 PC-Radio description
* Copyright (c) 2003-2008 by Stephane Fillod
*
* $Id: argonaut.c,v 1.5 2008-10-25 15:27:58 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "tentec2.h"
#include "bandplan.h"
#define TT516_MODES (RIG_MODE_FM|RIG_MODE_CW|RIG_MODE_SSB)
#define TT516_RXMODES (TT516_MODES|RIG_MODE_AM)
#define TT516_FUNCS (RIG_FUNC_NONE)
#define TT516_LEVELS (RIG_LEVEL_RAWSTR|/* RIG_LEVEL_NB| */ \
RIG_LEVEL_SQL|/*RIG_LEVEL_PBT|*/ \
RIG_LEVEL_RFPOWER|RIG_LEVEL_KEYSPD| \
RIG_LEVEL_SWR|RIG_LEVEL_ATT)
#define TT516_ANTS RIG_ANT_1
#define TT516_VFO (RIG_VFO_A|RIG_VFO_B)
/*
* tt516 receiver capabilities.
*
* protocol is documented at
* http://www.rfsquared.com/
*
*/
const struct rig_caps tt516_caps = {
.rig_model = RIG_MODEL_TT516,
.model_name = "TT-516 Argonaut V",
.mfg_name = "Ten-Tec",
.version = "0.2",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 1200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 400,
.retry = 3,
.has_get_func = TT516_FUNCS,
.has_set_func = TT516_FUNCS,
.has_get_level = TT516_LEVELS,
.has_set_level = RIG_LEVEL_SET(TT516_LEVELS),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END },
.attenuator = { 15, RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ|RIG_TARGETABLE_MODE,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 100, RIG_MTYPE_MEM, TT_MEM_CAP },
},
.rx_range_list1 = {
{kHz(500),MHz(30),TT516_RXMODES,-1,-1,TT516_VFO},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1,TT516_MODES, W(1),W(20),TT516_VFO,TT516_ANTS),
FRQ_RNG_HF(1,RIG_MODE_AM, W(1),W(5),TT516_VFO,TT516_ANTS),
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(500),MHz(30),TT516_RXMODES,-1,-1,TT516_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2,TT516_MODES, W(1),W(20),TT516_VFO,TT516_ANTS),
FRQ_RNG_HF(2,RIG_MODE_AM, W(1),W(5),TT516_VFO,TT516_ANTS),
RIG_FRNG_END,
},
.tuning_steps = {
{RIG_MODE_SSB|RIG_MODE_CW,10},
/* {RIG_MODE_SSB|RIG_MODE_CW,kHz(1)}, */
{RIG_MODE_AM,100},
/* {RIG_MODE_AM,kHz(5)}, */
{RIG_MODE_FM,kHz(2.5)},
/* {RIG_MODE_FM,kHz(5)}, */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
/* FIXME: add increments -> 34 filters? */
{RIG_MODE_CW|RIG_MODE_SSB, kHz(2.8)},
{RIG_MODE_CW|RIG_MODE_SSB, 200},
{RIG_MODE_CW|RIG_MODE_SSB, 0}, /* Filters are 200 Hz to 1000 Hz in 50 Hz steps, 1000 to 2800 Hz in 100 Hz steps */
{RIG_MODE_AM, kHz(4)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(15)},
RIG_FLT_END,
},
.priv = (void*)NULL,
.set_freq = tentec2_set_freq,
.get_freq = tentec2_get_freq,
.set_vfo = tentec2_set_vfo,
.get_vfo = tentec2_get_vfo,
.set_mode = tentec2_set_mode,
.get_mode = tentec2_get_mode,
.set_split_vfo = tentec2_set_split_vfo,
.get_split_vfo = tentec2_get_split_vfo,
.set_ptt = tentec2_set_ptt,
.reset = tentec2_reset,
.get_info = tentec2_get_info,
};
/*
* Function definitions below
*/