Hamlib/rigs/tapr/dsp10.c

132 wiersze
3.6 KiB
C

/*
* Hamlib TAPR backend - DSP-10 description
* Copyright (c) 2003 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "tapr.h"
#define DSP10_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define DSP10_FUNC (RIG_FUNC_NONE)
#define DSP10_LEVEL_ALL (RIG_LEVEL_NONE)
#define DSP10_PARM_ALL (RIG_PARM_NONE)
#define DSP10_VFO (RIG_VFO_A)
/*
* DSP-10 rig capabilities.
*
* This backend is not working, and is just a call for someone motivated.
* Note: The DSP has to be loaded beforehand!
*
* protocol is documented at (version 2)
* http://www.proaxis.com/~boblark/pc_dsp2.txt
*
* See also:
* http://home.teleport.com/~oldaker/dsp10_repository.htm
* http://www.proaxis.com/~boblark/dsp10.htm
* http://www.tapr.org/tapr/html/Fdsp10.html
*
*
*/
const struct rig_caps dsp10_caps =
{
RIG_MODEL(RIG_MODEL_DSP10),
.model_name = "DSP-10",
.mfg_name = "TAPR",
.version = "20061007.0",
.copyright = "LGPL",
.status = RIG_STATUS_ALPHA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 9600,
.serial_rate_max = 9600,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = DSP10_FUNC,
.has_set_func = DSP10_FUNC,
.has_get_level = DSP10_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(DSP10_LEVEL_ALL),
.has_get_parm = DSP10_PARM_ALL,
.has_set_parm = RIG_PARM_SET(DSP10_PARM_ALL),
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END },
.attenuator = { RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
RIG_CHAN_END,
},
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{MHz(144), kHz(148), DSP10_MODES, -1, -1, DSP10_VFO},
RIG_FRNG_END,
},
.tx_range_list2 = {
{MHz(144), kHz(148), DSP10_MODES, mW(20), mW(20), DSP10_VFO},
RIG_FRNG_END,
},
.tuning_steps = {
{DSP10_MODES, 1},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW, kHz(2.7)},
{RIG_MODE_FM, kHz(8)},
RIG_FLT_END,
},
.priv = (void *)NULL,
.set_freq = tapr_set_freq,
.set_mode = tapr_set_mode,
};