Hamlib/icom/ic2730.c

/*
 *  Hamlib CI-V backend - description of IC-2730 and variations
 *  Copyright (c) 2015 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include "hamlib/rig.h"
#include "idx_builtin.h"
#include "icom.h"

#define IC2730_MODES (RIG_MODE_FM)
#define IC2730_ALL_RX_MODES (RIG_MODE_AM|IC2730_MODES)

#define IC2730_VFO_ALL (RIG_VFO_MAIN|RIG_VFO_SUB)

#define IC2730_SCAN_OPS RIG_SCAN_NONE

#define IC2730_VFO_OPS  RIG_OP_NONE

#define IC2730_FUNC_ALL ( \
                            RIG_FUNC_TONE| \
                            RIG_FUNC_TSQL| \
                            RIG_FUNC_VOX)

#define IC2730_LEVEL_ALL    (RIG_LEVEL_AF| \
                            RIG_LEVEL_SQL| \
                            RIG_LEVEL_RFPOWER| \
                            RIG_LEVEL_MICGAIN| \
                            RIG_LEVEL_VOXGAIN)

#define IC2730_PARM_ALL RIG_PARM_NONE


/*
 * FIXME: real measurement
 */
#define IC2730_STR_CAL	UNKNOWN_IC_STR_CAL

static const struct icom_priv_caps ic2730_priv_caps = {
		0x90,	/* default address */
		0,		/* 731 mode */
		1,      /* no XCHG */
};

const struct rig_caps ic2730_caps = {
.rig_model =  RIG_MODEL_IC2730,
.model_name = "IC-2730",
.mfg_name =  "Icom",
.version =  BACKEND_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_MOBILE,
.ptt_type =  RIG_PTT_RIG,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  4800,
.serial_rate_max =  19200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  1000,
.retry =  3,
.has_get_func =  IC2730_FUNC_ALL,
.has_set_func =  IC2730_FUNC_ALL,
.has_get_level =  IC2730_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(IC2730_LEVEL_ALL),
.has_get_parm =  IC2730_PARM_ALL,
.has_set_parm =  IC2730_PARM_ALL,
.level_gran = {
	[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran =  {},
.ctcss_list =  common_ctcss_list,
.dcs_list =  full_dcs_list,
.preamp =   { RIG_DBLST_END, },
.attenuator =   { RIG_DBLST_END, },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.vfo_ops =  IC2730_VFO_OPS,
.scan_ops =  IC2730_SCAN_OPS,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
	// There's no memory support through CI-V,
	// but there is a clone mode apart.
		   RIG_CHAN_END,
	},

.rx_range_list1 =   {
	{MHz(118),MHz(174),IC2730_ALL_RX_MODES,-1,-1,IC2730_VFO_ALL},
	{MHz(375),MHz(550),IC2730_ALL_RX_MODES,-1,-1,IC2730_VFO_ALL},
	RIG_FRNG_END, },
.tx_range_list1 =  {
	{MHz(144),MHz(146),IC2730_MODES,W(5),W(25),IC2730_VFO_ALL},
	{MHz(430),MHz(440),IC2730_MODES,W(5),W(25),IC2730_VFO_ALL},
	RIG_FRNG_END, },

.rx_range_list2 =   {
	{MHz(118),MHz(174),IC2730_ALL_RX_MODES,-1,-1,IC2730_VFO_ALL},
	{MHz(375),MHz(550),IC2730_ALL_RX_MODES,-1,-1,IC2730_VFO_ALL},
	RIG_FRNG_END, },
.tx_range_list2 =  {
	{MHz(144),MHz(148),IC2730_MODES,W(5),W(50),IC2730_VFO_ALL},
	{MHz(430),MHz(450),IC2730_MODES,W(5),W(50),IC2730_VFO_ALL},
	RIG_FRNG_END, },

.tuning_steps = 	{
	// Rem: no support for changing tuning step
	 {IC2730_ALL_RX_MODES,kHz(5)},
	 {IC2730_ALL_RX_MODES,kHz(6.25)},
	 // The 8.33 kHz step is not selectable, depending on the operating band or mode.
	 {IC2730_ALL_RX_MODES,kHz(8.33)},
	 {IC2730_ALL_RX_MODES,kHz(10)},
	 {IC2730_ALL_RX_MODES,12500},
	 {IC2730_ALL_RX_MODES,kHz(15)},
	 {IC2730_ALL_RX_MODES,kHz(20)},
	 {IC2730_ALL_RX_MODES,kHz(25)},
	 {IC2730_ALL_RX_MODES,kHz(30)},
	 {IC2730_ALL_RX_MODES,kHz(50)},
	 RIG_TS_END,
	},
	/* mode/filter list, remember: order matters! */
.filters = 	{
		{RIG_MODE_FM|RIG_MODE_AM, kHz(12)},
		{RIG_MODE_FM|RIG_MODE_AM, kHz(6)},
		RIG_FLT_END,
	},
.str_cal = IC2730_STR_CAL,

.cfgparams =  icom_cfg_params,
.set_conf =  icom_set_conf,
.get_conf =  icom_get_conf,

.priv =  (void*)&ic2730_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,
.rig_open =  NULL,
.rig_close =  NULL,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,
.get_mode =  icom_get_mode,
.set_vfo =  icom_set_vfo,

.set_powerstat = icom_set_powerstat,
.get_powerstat = icom_get_powerstat,
.decode_event =  icom_decode_event,

.set_func =  icom_set_func,
.get_func =  icom_get_func,
.set_level =  icom_set_level,
.get_level =  icom_get_level,

.set_ptt =  icom_set_ptt,
.get_ptt =  icom_get_ptt,
.get_dcd =  icom_get_dcd,

.set_rptr_shift =  icom_set_rptr_shift,
.get_rptr_shift =  icom_get_rptr_shift,
.set_rptr_offs =  icom_set_rptr_offs,
.get_rptr_offs =  icom_get_rptr_offs,
.set_ctcss_tone =  icom_set_ctcss_tone,
.get_ctcss_tone =  icom_get_ctcss_tone,
.set_ctcss_sql =  icom_set_ctcss_sql,
.get_ctcss_sql =  icom_get_ctcss_sql,
.set_dcs_sql =  icom_set_dcs_code,
.get_dcs_sql =  icom_get_dcs_code,

.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = icom_get_split_vfo,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,

};